SS temp control Suggestion

[Wraith504]

Ok, So as much as I use ss316 for coils. I have never used it in temp control with no device to support it. Now that I have the option to try it I am looking for resistance goals with temp settings that work well for people. Doesnt have to be exact settings just ball park it.

 

[Izan]

When I switch over to TC from wattage mode.
I leave the watts/resistance the same.
I set the temperature to between 420f-450f.
Spaced coil will work in either case.

HTH
I

 

[Wraith504]

When I switch over to TC from wattage mode.
I leave the watts/resistance the same.
I set the temperature to between 420f-450f.
Spaced coil will work in either case.

HTH
I

Thank you. First build is a spaced 10 wrap 24awg coil that i am running at 220 C the mod doesnt show F from what I can find yet. so thats about 430 F and it vapes nice i have the preheat set around 33F

 

[Carl2]

I've got a Smok G-priv and the Voopoo Drag both I use in temp mode with dual SS coils. I have 3 TFV8 Smok tanks Big baby beasts with RBA decks, I like them. They came with .40 ohm coils and I've been making coils for them. Two
.80 ohm coils for a total of .40 ohms. I'm getting some SS ribbon wire and want to try some things with that. Also the Smok tanks are 25 mm which gives a little more space to work in. I vape at 340 F preheat at 32 W on both devices.
Cotton starts burning at 400 F but its filled with liquid.

 

[bombastinator]

I was doing 5 wraps on 3.5mm in 22ga single coil, and setting my temp at 400f. I since discovered bypass mode and like it so much I may go back to mechs though

 

[Wraith504]

I've got a Smok G-priv and the Voopoo Drag both I use in temp mode with dual SS coils. I have 3 TFV8 Smok tanks Big baby beasts with RBA decks, I like them. They came with .40 ohm coils and I've been making coils for them. Two
.80 ohm coils for a total of .40 ohms. I'm getting some SS ribbon wire and want to try some things with that. Also the Smok tanks are 25 mm which gives a little more space to work in. I vape at 340 F preheat at 32 W on both devices.
Cotton starts burning at 400 F but its filled with liquid.

I am at 430 with rayon with 35w preheat the 10 wrap 24awg SS build is .46 single coil 3mm ID. I can go higher and get a much warmer vape with no problem but I think I like it at 430 the charon ts only increments in 10 degrees which kind of stinks rather than 5 or less but it works. i need to order more varieties of SS because I am literally just down to 24. I still have some nickel options but ehhhhh.