Look's like Ivape is getting a new new Lavatube!
"Here are some pix from the factory before they shipped last night.
Photo Album - Imgur
you've seen what I've seen.
Edit: Specs
On/Off (Small Power Button): Press for 5 times to lock the device Press for 5 times to unlcok the device ; Frist times to fix the battery ;need press five times to unlocked
Press for 1 times to test the resistance ;
If the activation button is held down for 10 seconds or longer, the Lavatube VV 1.5 will shut itself off until the button is released.
Short Circuit/Atomizer Protection ; if Atomizer Low 1.3ohms , will cut by itself ; if face any short of chipset electronic; the chipset will cut by itself .
Reverse Battery Protection - Protects against reverse battery installation.
Battery Monitoring/Over-Discharge Protection Device should monitor the battery voltage and automatically turn off when the battery is discharged.
Amperage could Up to 4A, But we limit the Atomizer Resistance on 1.2ohms ..if Low 1.2 Ohms will cut by itself
3 cm Vent hole on the bottom of the device for added safety
Our New Lavatube VV could fit both protected or unprotected 18650 Battery
If the Voltage which show on LCD on 3V to 6V , When body with atomizer and without atomizer, The real voltage are +- 0.2V ; The LCD will not show like the Old VV1.5 without atomizer ;when 3V ,The LCD show 4.7V
Metal caps for top and end"
-Ivapeguy
"Here are some pix from the factory before they shipped last night.
Photo Album - Imgur
you've seen what I've seen.
Edit: Specs
On/Off (Small Power Button): Press for 5 times to lock the device Press for 5 times to unlcok the device ; Frist times to fix the battery ;need press five times to unlocked
Press for 1 times to test the resistance ;
- Button: On press, increases voltage by .1 increment between 3volt and 6 volt. When you reach 6 volts, the user starts back at 3 volts
- Button: On press, decreases voltage by .1 increment between 3volt and 6 volt. When you reach 3 volts, the user starts back at 6 volts
If the activation button is held down for 10 seconds or longer, the Lavatube VV 1.5 will shut itself off until the button is released.
Short Circuit/Atomizer Protection ; if Atomizer Low 1.3ohms , will cut by itself ; if face any short of chipset electronic; the chipset will cut by itself .
Reverse Battery Protection - Protects against reverse battery installation.
Battery Monitoring/Over-Discharge Protection Device should monitor the battery voltage and automatically turn off when the battery is discharged.
Amperage could Up to 4A, But we limit the Atomizer Resistance on 1.2ohms ..if Low 1.2 Ohms will cut by itself
3 cm Vent hole on the bottom of the device for added safety
Our New Lavatube VV could fit both protected or unprotected 18650 Battery
If the Voltage which show on LCD on 3V to 6V , When body with atomizer and without atomizer, The real voltage are +- 0.2V ; The LCD will not show like the Old VV1.5 without atomizer ;when 3V ,The LCD show 4.7V
Metal caps for top and end"
-Ivapeguy
Last edited: