Svoemesto Kayfun Mini V3

[Jeffp305]

Hmmm. Try rewicking the thing using different amounts of wick material. I'm guessing you have too little. Make your wick wider, perhaps. And as long as it just touches the deck (similar to other kayfun builds) you should be OK. If that fails, go in the other direction and make your wick thinner. Also, it never hurts to check your o-rings. Maybe just change the inner one and see what happens. Some things to try.

Okay thanks for the suggestions, I'm in the middle of adding a thicker wick right now actually, hope it works!

 

[woita]

had an erlk, but that was over a year ago. if my memory serves right (I've vaped the Erl without the ring as well), they are about the same. maybe the km3 is a bit airier, but again I might remember it wrong
both airflows work(ed) great for me <- mtl guy

 

[Impulso]

had an erlk, but that was over a year ago. if my memory serves right (I've vaped the Erl without the ring as well), they are about the same. maybe the km3 is a bit airier, but again I might remember it wrong
both airflows work(ed) great for me <- mtl guy

My feeling is that the erl's had quite a bit more airflow compared to the km3. I remember distinctly trying to get a tighter draw and couldn't.


Sent from my iPhone using Tapatalk

 

[Bronze]

DIVER!!!!!!!!

Great to see you Bud!

 

[Elyptic]

My feeling is that the erl's had quite a bit more airflow compared to the km3. I remember distinctly trying to get a tighter draw and couldn't.


Sent from my iPhone using Tapatalk

This is my feeling as well. But again, my Erl has the open draw center post installed, so its probably not a fair comparison.

Sent from my Nexus 6 using Tapatalk

 

[stanleybb50]

So after obsessing for like an hour.... I decided on this for a spare/emergency "I'm out" ecig oil container. Kind of a last resort type thing. I plan to keep the innokin ucan in the car at all times, and/or juice with me... But "just in case".

GUS Mini Pill Fob, Made in USA, Stainless Steel Keychain Pill Holder, Emergency Aspirin Holder, Compact Design Amazon.com: GUS Mini Pill Fob, Made in USA, Stainless Steel Keychain Pill Holder, Emergency Aspirin Holder, Compact Design: Health & Personal Care

I considered this as well:

GUS Original Pill Fob, Made in USA, Stainless Steel Keychain Pill Holder, AAA Battery Holder https://www.amazon.com/dp/B00MY9JR0E/ref=cm_sw_r_other_awd_c.nWwbN99HB16

And here's some other options anyone interested might wanna check out that are a little bigger:

GUS Trekker Pill Fob, Made in USA, Stainless Steel Keychain Pill Holder, CR123A Battery Holder Amazon.com: GUS Trekker Pill Fob, Made in USA, Stainless Steel Keychain Pill Holder, CR123A Battery Holder: Health & Personal Care

Cielo Pill Holders - Waterproof Slim Single Chamber Stainless Steel Keychain Pill Fob https://www.amazon.com/dp/B00D2JKS6M/ref=cm_sw_r_other_awd_kaoWwbVJQFH5G

- Sent from my Note 5 via Tapatalk

 

[stanleybb50]

Little easier to compare on their website directly:

GUS™ Pill Fobs

- Sent from my Note 5 via Tapatalk

 

[Pinggolfer]

Little easier to compare on their website directly:

GUS™ Pill Fobs

- Sent from my Note 5 via Tapatalk

There all made in the USA. Doesn't fasttech sell them?

 

[HBcorpse]

Also - I'm considering these to hold spare oil on my Keychain.. My Innokin Ucan is just so big and heavy. Awesome, but so big and heavy....

Looking for smaller options now that my wife's new car can't just use a small key... With push button starting, the "key" is her (not small) remote transmitter thing. So I've gotta carry that around now.

Anointing Oil, Keychain Vial, 6 Pieces

- Sent from my Note 5 via Tapatalk

Jesus Christ!

 

[stanleybb50]

Jesus Christ!

LOL

- Sent from my Note 5 via Tapatalk

 

[stanleybb50]

There all made in the USA. Doesn't fasttech sell them?

Looks like there's definitely options on fasttech. Although different.

- Sent from my Note 5 via Tapatalk

 

[raitizz]

Little easier to compare on their website directly:

GUS™ Pill Fobs

- Sent from my Note 5 via Tapatalk

Is this the American nephew of the Greek GUS?

R

 

[stanleybb50]

Is this the American nephew of the Greek GUS?

R

Lol. I kinda thought the same thing.

- Sent from my Note 5 via Tapatalk

 

[Pinggolfer]

Is this the American nephew of the Greek GUS?

R

No brother

 

[raitizz]

Those are pill fobs. Do they take a bottle? The Innokins are designed for liquid.

R

 

[vapdivrr]

DIVER!!!!!!!!

Great to see you Bud!

Thanks bronze!! So you enjoying this new guy?

 

[Bronze]

Thanks bronze!! So you enjoying this new guy?

Sure am Diver. It's a solid little atty. I've been finding I prefer smaller profiles the past part of my journey. I use a P3 and went to mini mode. Then I found a titanium dripper which was nice and light. Love it. Then this KM3 was released and I liked the idea of going back to a tank and this smaller size was perfect. She vapes like a KFL (but offers more airflow). A little warmer than a KFL but makes sense given it is a smaller tank. Sure is easy to use with the juice control. I never minded the bottom fill on the KFLs because they hold 4.5 mls. But at 2 mls with the KM3 it's nice to have the juice control/top fill. Very quick and easy to refill this tank. And of course, you get the Svoemesto quality. I never sprung for the K4 either for the same reasons you didn't. But I'm glad I got this KM3. Very nice rebuildable tank and especially if you prefer going to a smaller profile. I don't know if it will give you as much air as you are looking for (versus the Erl) but I can say it is airier than the KFLs.

Been doing any diving?

 

[Bronze]

I measured the tank capacity using a measuring syringe. I got EXACTLY 2.0 mls starting from a freshly cleaned/primed tank. It was pretty much filled to the top with a small air bubble.

 

[stanleybb50]

Those are pill fobs. Do they take a bottle? The Innokins are designed for liquid.

R

Yes pill fobs. I don't think they'll fit a bottle. Just using for emergencies. I'm planning to just take the top off and dump.

- Sent from my Note 5 via Tapatalk

 

[vapdivrr]

This is my feeling as well. But again, my Erl has the open draw center post installed, so its probably not a fair comparison.

Sent from my Nexus 6 using Tapatalk

This is my feeling as well. But again, my Erl has the open draw center post installed, so its probably not a fair comparison.

Sent from my Nexus 6 using Tapatalk

I have 5 erlks and a couple have the open draw positive pole which I think is 2mm. I believe a stock positive pole is 1.6? Anyways, doesn't the kayfun mini have over 2mm capabilities?