Svoemesto Kayfun Mini V3

Status
Not open for further replies.

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
I am. But I also still appreciate Svoe. However (looks around and ducks), reading this thread has not made me feel a need to get one of these smaller Kayfuns. I'm sure they're great for a small rba. But it's too small (19mm) IMHO, 2ml capacity (too little for me), and the posts about things getting stuck and forgetting to turn on the juice flow, thus getting burnt cotton, makes me happy to stay where I am.
Yep, this is a mini. If capacity is an issue then it's not for you (or anyone who wants to maximize capacity). And you likely only forget once to turn the juice flow back on. It has a way of teaching you a lesson. :)
 

rbrylawski

Sir Rod - MOL
ECF Veteran
Verified Member
Jul 11, 2014
8,211
34,162
Tampa, FL
Yep, this is a mini. If capacity is an issue then it's not for you (or anyone who wants to maximize capacity). And you likely only forget once to turn the juice flow back on. It has a way of teaching you a lesson. :)

If there is a new larger Kayfun coming out as some have said, it may be of interest to me. One of the things I've learned with the Kabuki is I need more air than the KFL+ provides.
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
If there is a new larger Kayfun coming out as some have said, it may be of interest to me. One of the things I've learned with the Kabuki is I need more air than the KFL+ provides.
With all the copycats that came out after the KFL, perhaps the most popular reason why people preferred it over the KFL was the increased airflow.
 

rbrylawski

Sir Rod - MOL
ECF Veteran
Verified Member
Jul 11, 2014
8,211
34,162
Tampa, FL
With all the copycats that came out after the KFL, perhaps the most popular reason why people preferred it over the KFL was the increased airflow.

Hopefully, Svoe learned from that and won't disappoint going forward. No matter what, I will never buy a copy.
 

Pinggolfer

Vaping Master
ECF Veteran
Verified Member
Jul 28, 2013
6,891
18,798
The Clemson Tigers State
I am. But I also still appreciate Svoe. However (looks around and ducks), reading this thread has not made me feel a need to get one of these smaller Kayfuns. I'm sure they're great for a small RBA. But it's too small (19mm) IMHO, 2ml capacity (too little for me), and the posts about things getting stuck and forgetting to turn on the juice flow, thus getting burnt cotton, makes me happy to stay where I am.

I forgot you vape the hugh 2.5 ml kabuki.

If there is a new larger Kayfun coming out as some have said, it may be of interest to me. One of the things I've learned with the Kabuki is I need more air than the KFL+ provides.

How much air flow does the kabuki provide?

Having vaped both the kabuki and V3 the V3 is better. :)
 

Katya

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Feb 23, 2010
34,804
120,147
SoCal
If there is a new larger Kayfun coming out as some have said, it may be of interest to me.

Q might know, but he's not telling...
wink.gif
 
Last edited:

rbrylawski

Sir Rod - MOL
ECF Veteran
Verified Member
Jul 11, 2014
8,211
34,162
Tampa, FL
I forgot you vape the hugh 2.5 ml kabuki.



How much air flow does the kabuki provide?

Having vaped both the kabuki and V3 the V3 is better. :)

You're right. 2.5ml isn't much more than 2ml. But I don't like the 19mm size of the K3.

I haven't vaped a V3, so I certainly can't compare airflow, but the airflow on a Kabuki is significantly more than on a KFL+.

Trust me, I am a fan of SvoeMesto. And YOU know I own two KFL+ (authentic only) with Plasma Tanks and I won't part with them. But for me, the Kabuki provides as satisfying a vape as they do, with more airflow. Also, the simplicity of just popping in a new coil every few weeks is about as plug and play as I could hope for.

I will gracefully bow out of here now. I'm not dinging the V3. It's just not the right thing for me at this time.
 

stanleybb50

Ultra Member
ECF Veteran
Verified Member
Apr 13, 2011
2,133
7,363
43
Pittsburgh
They're Modish Metal Works. I have one for each Kabuki. Fits great. Look's great!

Phew! I just stared at those for like 20 minutes and couldn't pull the trigger on a one... Haha.

They're all so nice! But not cheap.

- Sent from my Note 5 via Tapatalk
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
Hopefully, Svoe learned from that and won't disappoint going forward. No matter what, I will never buy a copy.
Well, what I mean by copycats is not clones but authentics by other designers/manufacturers who used the Kayfun design concepts (which has been essentially every rebuildable since). Keep in mind, just about everything we saw on those first Kayfuns was ground breaking stuff. Back then there was really no one offering large airflow or adjustable airflow.
 

Katya

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Feb 23, 2010
34,804
120,147
SoCal
Well, what I mean by copycats is not clones but authentics by other designers/manufacturers who used the Kayfun design concepts (which has been essentially every rebuildable since). Keep in mind, just about everything we saw on those first Kayfuns was ground breaking stuff. Back then there was really no one offering large airflow or adjustable airflow.

Actually, every RBA (RTA) now on the market is more or less based on the original SM design. Every single one.
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
Actually, every RBA (RTA) now on the market is more or less based on the original SM design. Every single one.
After making this same statement many times someone finally showed a picture of one that didn't copy from the Kayfun design. Some obscure foreign tank that I never saw before or since. :D
 

Pinggolfer

Vaping Master
ECF Veteran
Verified Member
Jul 28, 2013
6,891
18,798
The Clemson Tigers State
I will gracefully bow out of here now. I'm not dinging the V3. It's just not the right thing for me at this time.

Don't let the door hit you in the a*s on the way out. ;)

Only fooling with you RB. Don't forget a week from Monday is Bronze's birthday.
 

AstroTurf

Happy to be... Not Smoking!!!
ECF Veteran
Verified Member
Sep 27, 2014
11,385
48,543
Happy to be... Not Smoking!!!
Don't forget mine was Dec 29th :)

And another coming up on Dec 29th, 2016 as well. I'll look forward to no bday wishes. Haha

- Sent from my Note 5 via Tapatalk
Happy Belated BirthDay!!!

LOLz, Jim


Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread