DOH
IMO, those should've been part of the KM3 retail package itself. 2pcs in the spares baggy.
I 2nd this.
R
Svoemesto Kayfun Mini V3
- Thread starter Bronze
- Start date
- th_trl_thread_readers 0
- Status
I 2nd this.
R
I agree too, maybe you could mention it to them.
I'm going to take a punt and order the plastic screws. £5 will be well worth it if it cures the gurgles. I would have tried some Ptfe/Teflon tape myself on the metal screw but I can't see that curing both issues.
I am curious how a nylon grub screw differs from the original to cure the gurgling. I guess it must have slightly different geometry?
Also, to clarify, when I say I have it set to a tight draw, I'm setting it to have the equivalent airflow to a mini nautilus on the largest but one hole. I have the same airflow set on my Kfl+v2 without any issues whatsoever.
Edit: I also only have the juice control open half a turn using 50/50 juice and haven't experienced any dry hits.
I'm shocked that a smaller screw could be made.
No sanding the bottom of that ring, when I initially seen it, i thought it was just one of those that is literally like a ring. I have one somewhere that I had for my provari v2 and it didn't have that solid base
Sent from my SCH-I545 using Tapatalk
They're a tad thicker, but fit nicely and seal the hole tightly. The gurgling with the metal screws comes from condensate + air coming through the threads as you draw.
R
In the past, when I ordered all my previous kayfuns I always ordered them from intaste or SvoëMesto. I'm going to be ordering this km3 soon and have noticed vapor shark has them. I have a bunch of vapor shark dna box mods and have had good luck with them, has any one bought their km3 from them yet?
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
Ahh I see, that makes sense. Thanks for the explanation! I've ordered the nylon versions now anyway but I may try some Ptfe tape in the mean time. I'll take a comparison photo and report back when they arrive.
I just don't trust them any more. Probably have all their website issues worked out, but I don't really have the courage any more.
Just FYI; I just sent an email off to Vaperdna which is a US distributor to see if they would be stocking this new KFM Tank. So we could have a US vendor distributing the product to us verses all of the complications that come along with ordering from overseas. Awaiting their answer.Or this one that bulges out and holds 4.2ml.
If they or Steam Tuners, or anyone else makes a poly tank that accomplishes this same capacity, I'll be purchasing a few of the tanks and at least one more KMV3.
But alas, bulbous poly doesn't exist just yet.
- Sent from my Note 5 via Tapatalk
Thanks for that Jim,
Just to confirm, it is a 5mm. I dont have my sockets to hand to check..
Yep! I'm at only about 1 turn and all is well. I might go in a tad as well. We'll see how it goes.
And I just loaded this baby up with some Founders Reserve 1.0% and it's fantastic as expected. Fantastic! And this mini seems to be easy on wicking as well. (Coils and wick don't seem to gunk up as fast?)
Btw Johnsons Creek has a silent stock of Founder's Reserve for like $26/bottle. All they have left is the 0.6% though... I'll likely add some nic in myself to take it up to 1.2%. These bottles don't ship with the wooden barrels, which is why I believe it's a bit cheaper. It was a small batch also..
Only reason I know about this is because I'm on the email list!
Founders will never be an ADV for me, but rather something I can truly enjoy here and there. I bought 6 bottles and will freeze or refrigerate some! Haha
- Sent from my Note 5 via Tapatalk
Last edited:
All their auth. resellers will be carrying them. Some sooner. Canadian package is coming this weekend.
...and in supplying an innocuous-looking metal tube that just happens to screw onto their perfectly TPD-friendly 2ml atty asnd increase the vol to 4.2ml, they bypass the regs entirely!
Juice making was one thing I never got into bit I once purchased castle long reserve which is a fantastic juice but the issue was , the highest it came was 12mg which is low for me, I'm a 24/ 18 mg guy but I figured I would give it a try. Anyways the flavor was great but it lacked the TH I'm accustomed to and I just couldn't vape it so I inquired to some juice makers if I could just buy some nic and add some to increase at least to 18mg. They said you can but it most likely will dilute it and the flavor would suffer. I had thought it would only take a few drops but when they calculated it it was alot more nic then I imagined to bring it up to 18. Anyways i only had one bottle so I never tried it. I wound up buying gentleman's reserve in 24mg and kind of mixed them
Sent from my SCH-I545 using Tapatalk
Good stuff! Yeah... At 100mg/ml I did the math and to take my 0.6% up to 1.2% (6mg/ml up to 12mg/ml), I'll be adding 2ml of the Nude Nicotine concentrate to the 30ml bottle. Would still be ok.
You could get from 1.0 to around 1.6 by adding the same 2ml I believe. Well would be 1.562.
If you added 3ml to the 30ml of 1.0, you'd get to the 1.82 you're looking for. That wouldn't dilute it all that much still it seems to me.
Just need to make sure you buy the strong stuff. 100mg/ml.
I wanna check out this Gentleman's reserve.
- Sent from my Note 5 via Tapatalk
- Status
