Svoemesto Kayfun Mini V3
- Thread starter Bronze
- Start date
- th_trl_thread_readers 0
- Status
Item: 10 Eur
Shipping: 15 Eur
Good point, Q. I hadn't thought about that. Last time I ordered from InTasted I bought a bunch of stuff, so the postage was no big deal.
Mine started leaking out of the bottom today. It's leaking down through the air screw, past the 510 screw, into the square plate, and then out of it.
I took all that off and loosened the air screw a bit, cleaned it all up, and put it back together.
I just rewicked and brought the coil up a tad. No leaks yet. Do any of you guys that have been using kayfuns for a whIle have any advice? Throughout the day I tried one turn open, two turns open, etc... same thing, leak.
Hope I can get this sorted out, I love this thing.
I took all that off and loosened the air screw a bit, cleaned it all up, and put it back together.
I just rewicked and brought the coil up a tad. No leaks yet. Do any of you guys that have been using kayfuns for a whIle have any advice? Throughout the day I tried one turn open, two turns open, etc... same thing, leak.
Hope I can get this sorted out, I love this thing.
I don't own the new one yet but have many other kayfuns and the only time I remember one leaking from air hole was from a crack at the threads of tank . I would say it's either a seal issue or sometimes from over filling or not enough wicking material in the correct spot with juice flow to open
Sent from my SCH-I545 using Tapatalk
Yep, that one definitely wouldn't sit flush.... glue? They gluing those these days?
Lets hope, they glue the 510 connection in production correctly [emoji38]
Sent from my SCH-I545 using Tapatalk
A little OT but what 16650 batts are people using in the Dicodes Tiny? I'm looking at some efests but they are ICR (possibly rewrapped sanyo which is good I think) but I really would prefer IMR/INR...Thanks!
Here's how the KFM3 in the Red Sky Destroyer DNA 20 Mod looks. I haven't used this mod in years since it will not accept any tank greater than 20mm dia. I'm enjoying this combo a lot.
Time Flys for sure, It only seems like yesterday that I was praying for a protected mod over 15 watts and now their like up to 200! When that dna 20 arrived I was in heaven for sure.
Sent from my SCH-I545 using Tapatalk
Hi guys, I had posted a few weeks ago about the problems I was having and I got some really great advice, so thank you. Unfortunately the problem I have with flavor is still persisting. I'm going to post a pic of my build, maybe someone can see if I'm doing something wrong here. I know it's not going to taste like an RDA, I get that, but it's just completely flavorless to me. I'm using Glas - Glazed in it right now which is one of the sweetest juices out there. It doesn't taste like anything. I get a little donut flavor through my nose, but I taste zero sweetness on my tongue. It's incredibly unsatisfying. It's a 60/40 but on the thin side. If I put this same juice in an Aspire Nautilus the flavor is night and day. The Nautilus has a ton more flavor and I know that can't be the case. If I can't figure this out I'm going to look into selling it. Can anyone see an issue per my build pic? 28 gauge 2.5mm bit 1.3 ohms at 12 watts. Thanks so much
Attachments
I would try a spaced coil and lower it down. If I don't get those "upward" bends in my wick it seems to not be as good all the way around.
Hard to see, but maybe the coil could be lowered a bit ( how high is it?) How is the coil lighting before cotton? I'm sure it's fine, but sometimes if a coil is tensioned too much and certain wraps overlap others, the coil can produce sort of a Hotspot where the coil doesn't glow evenly. No individual wraps should be brighter then others. Lastly there should be no gaps between the cotton and coil as it turns down, the cotton shoulders should be full without it being over stuffed. And as saltwater suggested, a little spacing might help. There definitely looks like there is plenty of cotton in channels for sure and although I haven't received my new kayfun and am unfamiliar with this mini, for me personally, I would trim down the tails width wise. In most of my rta tanks when I use diameters at 2.5, after sliding in wicking material, I then reduce the fluff on my tails Slightly, this is to make sure I am not blocking any juice flow to it.
Sent from my SCH-I545 using Tapatalk
Last edited:
Received my tank from Steam Tuners. It's very nice, but the juice fill holes are a little narrow. I'll be widening those up a bit on the next refill. Lightens the atomizer up quite a bit and craftsmanship is superb.
- Status
