Svoemesto Kayfun Mini V3

[jmarkus]

Received my tank from Steam Tuners. It's very nice, but the juice fill holes are a little narrow. I'll be widening those up a bit on the next refill. Lightens the atomizer up quite a bit and craftsmanship is superb.

pics or it didnt happen!

 

[TheotherSteveS]

The ones I bought...

16650 Sanyo UR16650ZTA 4.35V 2500mAh Flat Top

Cheers bud! Thats also what I was looking at. I think these are what efest re-wraps which I can get for a little cheaper than the sanyo's. Both ICR chemistry with almost identical test results. I'm not going to stress it with the KF3.

 

[raitizz]

R

 

[kates]

I'm waiting on the steam tuners tank too. It's in the UK but the post has already come today . In the meantime it's just working so well - keep checking my deck just because I can!! 1.8 ohm coil, 7.8 watts and very high PG - haven't had to do any fiddling at all. I would LOVE a 22mm....

 

[woita]

but the juice fill holes are a little narrow.

did you have an issue with filling?
You don't have to aim for (or through) the holes. Just "throw" in the juice as Qorax has shown in his video and it will find its way through.

 

[vapdivrr]

Hi guys, I had posted a few weeks ago about the problems I was having and I got some really great advice, so thank you. Unfortunately the problem I have with flavor is still persisting. I'm going to post a pic of my build, maybe someone can see if I'm doing something wrong here. I know it's not going to taste like an RDA, I get that, but it's just completely flavorless to me. I'm using Glas - Glazed in it right now which is one of the sweetest juices out there. It doesn't taste like anything. I get a little donut flavor through my nose, but I taste zero sweetness on my tongue. It's incredibly unsatisfying. It's a 60/40 but on the thin side. If I put this same juice in an Aspire Nautilus the flavor is night and day. The Nautilus has a ton more flavor and I know that can't be the case. If I can't figure this out I'm going to look into selling it. Can anyone see an issue per my build pic? 28 gauge 2.5mm bit 1.3 ohms at 12 watts. Thanks so much

I know sometimes I go on with a hundred different reasons for certain issues but usually, for loss of flavor problems, most of the time , if the coil is good and it's at a normal height, and the device has no issues with losing its vacuum, it's a wicking issue. For the most part to much cotton will reduce the amount of juice being vaporized , which reduces flavor. Also not enough wick can do the same thing, I know if I stuff to much rayon, the flavor is reduced, if i don't add enough I get a hissing sound long after the release of the firing button which then results in a dry hit.

Sent from my SCH-I545 using Tapatalk

 

[bakke85]

Still waiting on the steel tanks. Meanwhile this combi is just fine

 

[usr/]

Still waiting on the steel tanks. Meanwhile this combi is just fine

My concern with the Dicodes was the fixed center pin. Some of the YT reviews on it showed ever so slight gaps in different atomizers. So I wonder if they used SvoeMesto specs on their 510 because it appears to fit like a glove. That is one nice looking setup.

 

[bakke85]

My concern with the Dicodes was the fixed center pin. Some of the YT reviews on it showed ever so slight gaps in different atomizers. So I wonder if they used SvoeMesto specs on their 510 because it appears to fit like a glove. That is one nice looking setup.

There is a tiny gap but it is really hard to see. On my opinion it fits perfect.

 

[Bronze]

I'm waiting on the steam tuners tank too. It's in the UK but the post has already come today . In the meantime it's just working so well - keep checking my deck just because I can!! 1.8 ohm coil, 7.8 watts and very high PG - haven't had to do any fiddling at all. I would LOVE a 22mm....
View attachment 532529

But the mini looks so good on that Radius.

 

[raitizz]

It arrived. Tiny little thingy

R

 

[Bronze]

It arrived. Tiny little thingy

R

Gee, I guess you'll have to take some time to break it in for your buddy.

 

[subwayaznm]

Mine started leaking out of the bottom today. It's leaking down through the air screw, past the 510 screw, into the square plate, and then out of it.

I took all that off and loosened the air screw a bit, cleaned it all up, and put it back together.

I just rewicked and brought the coil up a tad. No leaks yet. Do any of you guys that have been using kayfuns for a whIle have any advice? Throughout the day I tried one turn open, two turns open, etc... same thing, leak.

Hope I can get this sorted out, I love this thing.

I ordered a pack of those Air Control Grub Screws from Cremdevape and going to see if that helps. I'll post back and let you know. Mine started to leak yesterday. I only turn the Juice Control 1.5 turns as "Q" stated in his video; just FYI

 

[Saltwater]

I ordered a pack of those Air Control Grub Screws from Cremdevape and going to see if that helps. I'll post back and let you know. Mine started to leak yesterday. I only turn the Juice Control 1.5 turns as "Q" stated in his video; just FYI

I look forward to seeing how they work out. I took mine apart and rewicked, so far no problem today.

 

[MikeE3]

It really looks cool in person. I've been fooling with the 510 screw and it's holding on by a thread but now it seems to work.

View attachment 531624

Maybe this would help?

Circuit Board Spacer | Madvapes

 

[VapingTurtle]

Maybe this would help?

Circuit Board Spacer | Madvapes

Hmmm... good idea.

 

[Sockeye404]

The tanks arrived. Tank #3 looks good on my DNA

an I like the tank #2 for small tubes:

But I think it now makes sense to switch to temp control

 

[raitizz]

Gee, I guess you'll have to take some time to break it in for your buddy.

Yep, it definitely needs some miles on it
I'll have it for myself until Monday.

R

 

[Carnage9270]

Sorry these are so big, but I figured people would want some detail. Bad camera angle, but the two are identical in height.

 

[Sockeye404]

Hey Bro!