Svoemesto Kayfun Mini V3

Status
Not open for further replies.

MikeA5

Super Member
ECF Veteran
Verified Member
Aug 29, 2011
403
257
Methuen, MA
Do you guys really pay attention to the little tiny leads you snip? I used to try to make sure that I caught them all and tossed them but a few times they dissappeared. Well last week I found one and it was embedded into my foot. That sucker was deep too and I was lucky my wife removed it. Anyways i now go outside to make my final snips. Is it just me on this one? Cause I see loads of videos where people just snip away and let it fly. Are you a let it fly, or really pay attention to them? I should just keep them really long and rotate snap them instead of snipping

Sent from my SCH-I545 using Tapatalk
I'm very careful with my snips, especially since we have two cats and a dog. Don't want those snips to embed into their paws and/or our feet if the wire falls on the floor. I usually snip into a sink and rinse the snipped wire down the drain. I found if I point the wire that is going to be sniped toward the drain it will snip in that direction. But most of the time I'll grab the wire between two fingers of one hand as I cut with the other hand or use forceps to hold the wire while cutting. That way the cut wire can be placed down the drain of the sink with my fingers or forceps.
 

AstroTurf

Happy to be... Not Smoking!!!
ECF Veteran
Verified Member
Sep 27, 2014
11,385
48,543
Happy to be... Not Smoking!!!
Do you guys really pay attention to the little tiny leads you snip? I used to try to make sure that I caught them all and tossed them but a few times they dissappeared. Well last week I found one and it was embedded into my foot. That sucker was deep too and I was lucky my wife removed it. Anyways i now go outside to make my final snips. Is it just me on this one? Cause I see loads of videos where people just snip away and let it fly. Are you a let it fly, or really pay attention to them? I should just keep them really long and rotate snap them instead of snipping

Sent from my SCH-I545 using Tapatalk
F O D is unacceptable in my house.

I secure them before the cut.

Jim
 

JoeBattams

Senior Member
ECF Veteran
Verified Member
Nov 3, 2012
178
341
41
Northampton- UK
If you dont mind my asking, What have been your impressions of the vape as compared to KFV4, especially in terms of flavour- is there any noticeable difference? Sorry if it's already been asked (am guessing it will have been at some point in the last 141 pages!)- My KF4 is still very much my go to atty every day- I'm not really interested in temp control. I was wondering whether the smaller deck and chamber of the KF M3 may make a noticable difference?
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Can you do a video on cloud chasing? I just bought a 400 watt mod and was thinking of doing some 000000.001 resistance coils but not sure whether I check the ohms before or after I vape...

Sent from my SCH-I545 using Tapatalk
I could if I had the right gear/s, the right mindset and style brother.

I just cannot do airy-open lung draws. And neither do I possess a high powered mod or a bootyfull RDA. So, my weakly efforts will never fog up the room -- and essential [after]effect for such videos
laughing-007.gif


Thanks for asking Sir!
__________________________________________
And Good Morning everyone! Yes, I'm off-work today
a-wink.gif
 

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,933
61
sarasota,fl
I could if I had the right gear/s, the right mindset and style brother.

I just cannot do airy-open lung draws. And neither do I possess a high powered mod or a bootyfull RDA. So, my weakly efforts will never fog up the room -- and essential [after]effect for such videos
laughing-007.gif


Thanks for asking Sir!
__________________________________________
And Good Morning everyone! Yes, I'm off-work today
a-wink.gif
You do know I was joking

Sent from my SCH-I545 using Tapatalk
 

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,933
61
sarasota,fl
After 20+ refills I haven't experienced this, but I don't overfill my tank.
Actually I don't think it was from over filling, last night I kept the liquid in the tank, turned upside down just to remove deck and try a different coil, I then refilled a little. maybe because it was inverted some collected above or maybe yes, I over filled, it fills fast for sure

Sent from my SCH-I545 using Tapatalk
 
  • Like
Reactions: qorax

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
Do you guys really pay attention to the little tiny leads you snip? I used to try to make sure that I caught them all and tossed them but a few times they dissappeared. Well last week I found one and it was embedded into my foot. That sucker was deep too and I was lucky my wife removed it. Anyways i now go outside to make my final snips. Is it just me on this one? Cause I see loads of videos where people just snip away and let it fly. Are you a let it fly, or really pay attention to them? I should just keep them really long and rotate snap them instead of snipping

Sent from my SCH-I545 using Tapatalk
I wiggle them off so nothing flies off.
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
We’re sorry. Your search did not return a result!
sad-027.gif
Are you a closet cloner?

I asked Ms. Robin to add the serial number link to the first post in this thread so we can direct anyone to the link to check on their authenticity. Thanks for the link Victor.
 
Status
Not open for further replies.

Users who are viewing this thread