SweetVapes.com All things custom... wood mods, cases and juices

Status
Not open for further replies.

B-Rad_The_Mad_Vapr

Vaping Master
ECF Veteran
Oct 28, 2010
3,091
3,143
In a pile of sawdust
    Hi everyone!

    Just getting things started. I am ßrąd Grüss, owner of Sweet Vapes. Feel free to browse my site for further details and sign up for my newsletter for updates and special offers :) کω∊∊T √AP∊ک ●∁om a division of BGcarpentry.org

    My goal is to provide a service like no other in the market today. Striving for the highest quality and craftsmanship from me to you!
    Please keep in mind this is a custom service and not a mass production thing. Signature model PV's such as our first to be released ”The GRIP. and cases for more popular standard units too.

    Offering everything custom. Newest wooden mod "The GRIP" to be released within the next week or two, just refining the construction a bit while I'm awaiting a shipment of supplies ;) I'll post some pics and a description of a beta prototype in the bottom of this post after my introduction.

    In about 10 days will be proudly offering Vaporiffic and B-Rad's Blendz juices. You choose your PG/VG content and nic strength. Great flavors such as dragon fruit, lemonade, sassafras, mtn dew, big red and juicy fruit gums... YUM! And the green apple puts Granny Smith to shame :lol: (I am loving this)

    Custom made exotic hardwood cases for your gear for home, carry or display purposes. outfitted with "pick and pluck foam" so you can customize the interior the way you see fit. Lets face it, we spend a lot of money on beautiful and personal PV's no matter what brand or style it may be, but there is no easy way to travel with most mods and their supplies (PV, batteries, juice etc...) Shouldn't the case you carry your PV in be as attractive and functional as what you put in it?


    Features of "The Grip": Get a GRIP and vape! Cost will be $79.99
    - sealed 510 connector
    - contoured finger grooves for a comfortable feel
    - ergonomically placed activation button
    - 4 amp switch rated at over 1,000,000 activations (Flat or domed)
    - capability to use different battery combinations for a range of voltages

    I'm also willing to reverse the construction and locate the switch to be activated by your thumb vs. index finger if desired. :)

    Recommended batteries:
    - 1 x's AW Li-ion 18650 for 3.7v
    - 2 x's LiFePO4 RCR123A 3.0v for 6v
    - 2 x's LiFePO4 16340 3.2v for 6..4v
    - 2 x's LiFePO4 17340 3.2v for 6.4v
    - 2 x's IMR 16340 3.7v for 7.4v


    Here's a preview for everyone to get an idea of what it will look like...Remember the picture is a BETA unit and also has no clear coat on it, so it will be slightly different, a little slimmer, better joinery construction etc...more refined over all.

    Exterior dimensions have been refined to 4.3" Height x 1.75" Wide x 1.2" thick :)

    Thanks for checking my products out!

    100_0605.jpg


    Your choice of switch (they are 4amp rated at over 1,000,000 activations)

    Domed
    switch%20domed.jpg


    Flat
    switch%20flat.jpg
     
    Last edited:

    B-Rad_The_Mad_Vapr

    Vaping Master
    ECF Veteran
    Oct 28, 2010
    3,091
    3,143
    In a pile of sawdust
      I have had one of the people beta testing my units tell me that the recessed switch is a little bit of a stiff press for their liking (it's not IMO, but that is subjective to user preference), so I had just received some alternative ones to offer as an option that have a much lighter press to them. They are still 4amp and rated to over 1,000,000 activations with the only difference being that they are not recessed but domed. I'm also willing to entertain the option of reversing the activation switch to use with your thumb vs. index finger if desired. :)
       
      Last edited:

      B-Rad_The_Mad_Vapr

      Vaping Master
      ECF Veteran
      Oct 28, 2010
      3,091
      3,143
      In a pile of sawdust
        While I've been waiting on some supplies, thought I'd make a few things with what I have available ATM :)

        Start of a Bubinga case for a GGTS with AVS installed and room for extra Batts, atty and juice bottle.
        100_0606.jpg


        Figured (curly) cherry with zebrawood and a little less bxy than the beta ones...Very comfortable feel now! :)
        100_0612.jpg


        It's a little larger in size because I'm going to tinker with trying to ustilize a feeder and possibly vari volt ;)
        100_0609.jpg
         
        Last edited:

        stubear62

        Ultra Member
        ECF Veteran
        Verified Member
        Sep 27, 2009
        2,712
        8
        Myrtle Beach, SC
          Hey Brad,
          Now thats the size and if you can have the 'grip' on the long side so I could use my thumb for the domed button would be cool.
          No juice feed, just VV. LOL..
          Aslo a box to hold it..





          While I've been waiting on some supplies, thought I'd make a few things with what I have available ATM :)

          Start of a Bubinga case for a GGTS with AVS installed and room for extra Batts, atty and juice bottle.
          100_0606.jpg


          Figured cherry with zebrawood and a little less bxy than the beta ones...Very comfortable feel now! :)
          100_0612.jpg


          It's a little larger in size because I'm going to tinker with trying to ustilize a feeder and possibly vari volt ;)
          100_0609.jpg
           
          Status
          Not open for further replies.

          Users who are viewing this thread

            ')