SXK Billet box...

[BillW50]

And then there's this:
$11.09 SXK Replacement Tank + Base Deck + Chimney + Aspire Atlantis Coil Kit - 5ml / for BB Bantam revision mod kit at FastTech - Free Shipping
View attachment 881463
It says for Bantam but surely fits BB I figure.
Edit: Whoa Nellie, is that a misprint? (Atlantis) I swear that is a nautilus coil.

I have the one that came with the Bantam and yes it fits also in the BB. But the one that came with the Bantam uses Nautilus coils and not Atlantis coils. Although I use Atlantis coils all of the time and I dislike Nautilus coils. I wonder if that was an error?

Looking at the pics, those are Nautilus coils and not the same size as Atlantis coils.

 

[NolaMel]

And then there's this:
$11.09 SXK Replacement Tank + Base Deck + Chimney + Aspire Atlantis Coil Kit - 5ml / for BB Bantam revision mod kit at FastTech - Free Shipping
View attachment 881463
It says for Bantam but surely fits BB I figure.
Edit: Whoa Nellie, is that a misprint? (Atlantis) I swear that is a Nautilus coil.

I think so too Atlantis has a different 510 on the bottom

 

[FLICK]

And then there's this:
$11.09 SXK Replacement Tank + Base Deck + Chimney + Aspire Atlantis Coil Kit - 5ml / for BB Bantam revision mod kit at FastTech - Free Shipping
View attachment 881463
It says for Bantam but surely fits BB I figure.
Edit: Whoa Nellie, is that a misprint? (Atlantis) I swear that is a Nautilus coil.

3F have them also:
Buy SXK Tank + Base Deck + Chimney + 1.8ohm Aspire Atlantis Coil Kit

 

[BillW50]

Atlantis coils doesn't even come in 1.8Ω.

 

[dwcraig1]

While I really don't know where the typo originated I would bet that it came from the manufacturer....SXK

 

[b.m.]

Sxk is on a roll,cloning alot of the popular BB stuff now,they cloned the mission switch plate and panels too.
Buy SXK Mission Style G10 Panel Switch Kits for SXK BB DNA60 60W Kit

 

[b.m.]

Now if they would clone the Boxxer v2,i'd be happy.I got an authentic,but i need spare glass and gaskets,and shipping from Odis is just stupid haha,a $10 order of glass and gaskets showed shipping of like $30 or somewhere around there,no way i'm paying close to $50 for 3 pieces of glass and 1 gasket.Hurry up SXK haha.

 

[Fredman1]

Now if they would clone the Boxxer v2,i'd be happy

Second that

Hurry up SXK haha

Second second

 

[FLICK]

Sxk is on a roll,cloning alot of the popular BB stuff now,they cloned the mission switch plate and panels too.
Buy SXK Mission Style G10 Panel Switch Kits for SXK BB DNA60 60W Kit

They appeared on FT also, $31 with code "MAP"
https://www.fasttech.com/products/1/10068683/9725019-sxk-replacement-mission-switch-panel-mission

 

[73neb]

I just recently got the 70 watt version and a vapeshell from 3F. The resistance jumps around like crazy and occasionally gives me a no atomizer message and doesn’t fire at all. I’ve checked the connections, rebuilt the bridge, etc. This is my first experience with a billet box and I love the form factor and the vape when it works. Anyone have any ideas on how to make this thing work properly ? Thanks.

 

[gsmit1]

I just recently got the 70 watt version and a vapeshell from 3F. The resistance jumps around like crazy and occasionally gives me a no atomizer message and doesn’t fire at all. I’ve checked the connections, rebuilt the bridge, etc. This is my first experience with a billet box and I love the form factor and the vape when it works. Anyone have any ideas on how to make this thing work properly ? Thanks.

THIS might, maybe help you. Maybe.

 

[BillW50]

I just recently got the 70 watt version and a vapeshell from 3F. The resistance jumps around like crazy and occasionally gives me a no atomizer message and doesn’t fire at all. I’ve checked the connections, rebuilt the bridge, etc. This is my first experience with a billet box and I love the form factor and the vape when it works. Anyone have any ideas on how to make this thing work properly ? Thanks.

THIS might, maybe help you. Maybe.

You can take that o-ring off of the key (drip tip holder) too. If it works then go from there.

 

[gsmit1]

You can take that o-ring off of the key (drip tip holder) too. If it works then go from there.

The specific problem I was addressing in those posts doesn't really have to do with the o-ring though. It's the shoulder of the key stopping on the top of the hole in the boro before it makes good contact with the chimney that was the issue there

In other words, the key needs to go deeper into that opening so it soundly connects to the top of the bridge or RBA. With some bridges and RBAs it sticks up enough for this not to be an issue.

It's not usually an issue at all, as I've since learned, but with that RBA and that boro, grinding that bevel instantly fixed it.

 

[gsmit1]

You can take that o-ring off of the key (drip tip holder) too. If it works then go from there.

Oh wait a minute. I see what you were saying now.

 

[Duggee]

Hey. Are the current dna60 versions on FT any good? Any issues I should know about before pulling the trigger?

 

[gsmit1]

Hey. Are the current dna60 versions on FT any good? Any issues I should know about before pulling the trigger?

The SXK 60 watt DNA 60 is a solid 1:1 clone.

I'm not sure what you mean by "issues" exactly, but they work just like a Billet Box

 

[Duggee]

The SXK 60 watt DNA 60 is a solid 1:1 clone.

I'm not sure what you mean by "issues" exactly, but they work just like a Billet Box

Nah just wondering if there were any niggles with it. Some of the photos for instance looked like the positive connection under the boro sat a bit high, but other videos didn't look that way at all.

Thanks for the reply!

Now that I've got your attention, any recommendations for atties? Been a few years since I dipped into the billet world and there looks to be some promising new atties. Had my eye on the Xeta. Looks like it would deliver that simple micro + cotton restricted direct lung that I prefer.

 

[gsmit1]

Nah just wondering if there were any niggles with it. Some of the photos for instance looked like the positive connection under the boro sat a bit high, but other videos didn't look that way at all.

Thanks for the reply!

Now that I've got your attention, any recommendations for atties? Been a few years since I dipped into the billet world and there looks to be some promising new atties. Had my eye on the Xeta. Looks like it would deliver that simple micro + cotton restricted direct lung that I prefer.

The Xeta is endlessly versatile and awesome. Can't really go wrong starting there. However, that one does have a niggly point. If you're aware of it it's easy to avoid, but if you over tighten the positive post it will break.

 

[Duggee]

The Xeta is endlessly versatile and awesome. Can't really go wrong starting there. However, that one does have a niggly point. If you're aware of it it's easy to avoid, but if you over tighten the positive post it will break.

That's the SXK version? Good to know!

 

[gsmit1]

That's the SXK version? Good to know!

That's every version. Including the authentic.