Tank-O-Matic Liquinator v4.1
- Thread starter Wylie
- Start date
- th_trl_thread_readers 0
- Status
o-rings good so far no probs....
good job on the end caps...the strprswpry tank.....ruh roh better not go there
Yeah, good idea......Don't wanna start no crap. I had another idea for filling. I was thinking of drilling a tiny hole in the top and tapping it to make a syringe fill. The only problem is I don't have small enough taps. I'd like to see the stainless version have my modifications and a tapped hole in the top to fill it.
imo don't think the holes are necessary being the caps just flip off and pop on so easy...was thinkin your idea before you did it with the flush caps but thought there might be a problem getting the caps off and on but evidently not an issue
I've had CE2 tanks before that were so tight you needed a screwdriver to get them off.....These are a breeze.....and no leaks....Amazing, not a drop.
You've done it again strprswpr - looks really nice, well done. My brother is a professional woodworker, and he has a lathe, maybe I'll have to look up a proper holder I could use 
I use to use a metal lathe when I was working maintenance in a factory, those were the good ole days haha
I use to use a metal lathe when I was working maintenance in a factory, those were the good ole days haha
Mine still leak badly from the batt end of the carto. It is a 3ml tank with the precut DC's. I have tried all 5 that I bought with the tank all with same outcome. I hear it said that if this happens it is bad carto's. I have ordered some XL DCC's and will try cutting them myself and see if that works. I cannot use the tank for now as I lose too much liquid.
Thanks for all the info on here.
RC
Thanks for all the info on here.
RC
If you have a ProVari, you don't really need to go LR since you can adjust the voltage. Might as well go 510 Standard Resistance (which is what i use on mine). Then you've got a whole lot of flexibility.
On tank size, if you go mega dual coil, get the 5 ml dual coil tank. Otherwise, I find the traditional 3.0 ohm Boge (standard) with a 3ml tank wonderful. If you guzzle the liquid, though, or have a SB, go for the Phat.
This makes me sad. I've only had that one run of bad cartomizers. If you have any spare cartos, you could try slotting one or tapping a hole in the side. Just to compare? I know you're losing juice, but you can try a partial fill that only comes up past the slots or hole...
Does anybody know if there is a difference in size for the DC Liquinator and the 510 one?
I have a bunch of 510 cartos but would like to try out the DC ones (and I would rather buy the pre-cut cartos) and would be a pain to have to buy one for each.
Thanks!
I'm assuming the Mega DC liquinator is bigger?
I have a bunch of 510 cartos but would like to try out the DC ones (and I would rather buy the pre-cut cartos) and would be a pain to have to buy one for each.
Thanks!
I'm assuming the Mega DC liquinator is bigger?
The DC Megas are taller but I don't see any reason why they won't work on the 3 mil tank
Yes, the Mega DC liquinator fits a mega cartomizer and is 5ml. The standard liquinator fits standard cartomizers and is 3ml.
If you get the 3ml tank, you can use a mega cartomizer, it just has a lot of the metal part of the cartomizer exposed. If you're smart, you won't lift your tank beyond the slots.
Pics are here:
http://www.e-cigarette-forum.com/fo...-o-matic-liquinator-v4-1-a-3.html#post3261495
If you get the 3ml tank, you can use a mega cartomizer, it just has a lot of the metal part of the cartomizer exposed. If you're smart, you won't lift your tank beyond the slots.
Pics are here:
http://www.e-cigarette-forum.com/fo...-o-matic-liquinator-v4-1-a-3.html#post3261495
Thanks, now to figure out where they're hiding their pre-slotted carto's.
Hey Wylie, sorry for all the questions but do you prefer LR 510 cartos or the new DC's?
I hope its not an issue, trying to use 510 cartos on the DC liquinator.
Hey Wylie, sorry for all the questions but do you prefer LR 510 cartos or the new DC's?
I hope its not an issue, trying to use 510 cartos on the DC liquinator.
Go SHOP / PARTS / CARTOMIZERS
EDIT: I generally prefer the standard, but I've recently begun faling in love with the Mega DC. I'm not a fan of the short DCs.
And not sure what you mean:
You can't use the standard 510 cartomizers on the taller DC tank. Only the other way around.
EDIT: I generally prefer the standard, but I've recently begun faling in love with the Mega DC. I'm not a fan of the short DCs.
And not sure what you mean:
You can't use the standard 510 cartomizers on the taller DC tank. Only the other way around.
Well I'm planning to try it out on the Jazz cartopipe (when I receive it) but till than it'll probably be on my Buzz.
Just came back to carto's from bottom feeding.
Edit: Wondering if I should get the regular 510 so I have a bit more space to grip when I take off the carto.
Just came back to carto's from bottom feeding.
Edit: Wondering if I should get the regular 510 so I have a bit more space to grip when I take off the carto.
Last edited:
it might be a little bit before i can part with it long enough to get it done but i might take you up on that eventually
I find it to be a plus using an XL/mega carto in a standard tank for just that reason. I have not had any issues with the tank sliding up (knock on wood) and prefer having the top of the tank a little bit further from my lips.
It also allows me to push the carto and its slots out of the tank on the occasions when the carto floods after refilling. I can either blow out the excess or allow it to drain without completely disassembling the tank or risk having the mouth of the carto becoming submerged inside a full tank.
And I can use any size of the cartos I own on it - regular/standard, mega/XL, or Fusion.
Last edited:
- Status
Similar threads
