-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
- Status
Built my first Term build. Turns out that I had just enough room between the SS ceramic holder and ceramic to stuff a 30awg NR silver wire into. Built it with with some Peaches and Cream #4 cotton wick from WalMart with a 1.7 ohm 32awg Kanthal A-1 coil.
I just have a couple quick questions since this is my first time with this RBA. Is it okay to leave the juice valve open and not have to worry about leaking? What do you guys do when the juice line is below the mouth piece besides just fill it with more juice? Does gurgling mean that the wick is already fully saturated and that I should close the juice valve?
This was an extremely easy build and I feel like I've probably done something wrong since it was so easy.
I just have a couple quick questions since this is my first time with this RBA. Is it okay to leave the juice valve open and not have to worry about leaking? What do you guys do when the juice line is below the mouth piece besides just fill it with more juice? Does gurgling mean that the wick is already fully saturated and that I should close the juice valve?
This was an extremely easy build and I feel like I've probably done something wrong since it was so easy.
As far as leaving the flavor control open at night you will get varying responses to it. I vape either 60/40 pg/vg or 50/50 and I leave mine open with NO flooding. If you use a higher PG juice it might flood. When you get the gurgling just close off the flavor control completely for a few drags then slowly open it back up as you are vaping.
Steve
this is the best wick around and ive tried a bunch; the 3mm stuff fits tight in the oddy clone but since using it; ive sidelined my real cobra genny. i get near identical flavor and larger vapor off this with the added benefit of zero leaks.
makes me wish i could find a penelope for reasonable price now.
Go back 1 page from where you pulled that quote from in4mati0n11, and you'll see some promising news about that very thing.
Question for any folks with the Cody/Oddity version, do you put two o-rings on the mouthpiece or one?
They can be had for $38 @ DV with code
http://www.e-cigarette-forum.com/fo...729-new-product-releases-108.html#post8480874
I used one as two would not allowed any room to open the mouthpiece from the completely closed position.
I'm talking about under the tank top not inside of it.
The one I have now is from Eric. I would buy another right now but I'm thinking about picking up a Dream Tube (BT804) from him first. I've been buying a new RBA a week from Eric and need to slow down
The one I have now is from Eric. I would buy another right now but I'm thinking about picking up a Dream Tube (BT804) from him first. I've been buying a new RBA a week from Eric and need to slow down
I got a Dream Tube (Kayfun clone) from Eric before the price went up on them. Mine was $17 and now they are $24.99.
They make lots of vapor, but they are super airy and there is hardly any flavor.
Overall, not as satisfying as a $6 Kanger T3.
I'm going to replace the stock silica wick and coil using some candle wick I just got in and hope the flavor improves.
Here's another pic the Terminator with the method that I have been using the last 3 days. It's been working perfectly so far:
http://i1290.photobucket.com/albums/b525/JazzyTech/FlatSilverTopChannelSilverShort_zpsb37aec69.jpg
I notched the silver with a small flat-tip screwdriver to keep the threads clear. Silver is nice to work with as NR wire.
That's what hemp twine looks like after 3 days of intense vaping
http://i1290.photobucket.com/albums/b525/JazzyTech/FlatSilverTopChannelSilverShort_zpsb37aec69.jpg
I notched the silver with a small flat-tip screwdriver to keep the threads clear. Silver is nice to work with as NR wire.
That's what hemp twine looks like after 3 days of intense vaping
Last edited:
@ Jazzy, it's starting to look like the "hemp" I used to use back in the day
Last edited:
Anyone get the tanks from Rampage Vapors? I have a terminator-C and a coop Tobeco oddy clone. I am looking at the large tank and a smaller tank (for a backup to the current small clear tank) for the Term-C and not sure which ones would work without purchasing a new mouthpiece stem. Also looking at replacing the steel tank on the Tobeco clone with a clear tank.
You wont replace the Tobeco tank until Tobeco makes one. There is nothing that will work on it. As far as compatible tanks for the term, you should measure the tank on there and gauge how much MP exposure you dont mind. There is no stopper on the MP so any tank will work. Just a matter of MP protruding out the top.
I ordered 2 tanks from rampage for my term. But have received them yet. Will let u know how they fit. I got a large and medium.
I think I finally dialed in the flavor control with my wick setup. 3/4 of a turn open and I'm getting FREAKIN PLUMES!
I ordered some tanks from them back when the Term first came out. They fit perfectly, as does the longer mouthpiece they sell.
- Status
Similar threads
- Locked
