The bliSS rebuildable atomizer now in stock!

[dspin]

own my OWN business. I completely understand. The fact that you have been so responsive is half the battle. At least people do not feel like they are being left out in the cold.

These things have a way of always working out, and communicating is the key. thanks again.

++++++++++++ 10 on that. Jayson is right here. I am impressed with that AND his responses. On another note, I pressed the post into a 4x4 deck post today - hahahahahah - it didn't move but indented the post. SO, don't do that. Then got a heavy screwdriver, put a heavy sock over the post and continued to pound away. It finally moved, so it now fires on P18 and Caravela. Glad everyone said to do that, I would never have done such a thing otherwise.


I can say that the MNKE batts must have been built for this atty. Performance increased alot with one over the AW IMR 18650 1600. There is a big diff in using each freshly charged. Yes they are both new, used two of each - brand new in last couple weeks just to make sure before I spoke.

I have used MNKE for last yr but they really sing with the Bliss


Side Note, machine oil taste is out - took everything completely apart and boiled in water for a few minutes, then washed in Dawn detergent and let it all sit in that for an hr.

 

[jayson]

Spoke to docdave tonight. I will have the o-rings in hand on Saturday. They will all be in the mail by Monday. Talked a bit about the titanium bliss and the bliss mini. We will make sure that any future products are 100%. Dave definitely knows how to get a product to perform, and I will be sure to stay on top of QC. The titanium bliss is pretty amazing. It weighs next to nothing compared to the stainless version.

 

[digunderground]

@Jayson-

Any Clue when you will have pyrex tanks back in? I ordered a spare with my order but it must have cracked during shipping, and I dont feel safe only having the one on it.. haha.. I KNOW myself, im clumsy.. plus I'll want a few on hand if im lucky enough to get a TI one..

On an awesome note, THIS THING IS A BEAST.. love it. looks perfect on my 18650 cube!

 

[Vapor2112]

Pics.....?

@Jayson-

Any Clue when you will have pyrex tanks back in? I ordered a spare with my order but it must have cracked during shipping, and I dont feel safe only having the one on it.. haha.. I KNOW myself, im clumsy.. plus I'll want a few on hand if im lucky enough to get a TI one..

On an awesome note, THIS THING IS A BEAST.. love it. looks perfect on my 18650 cube!

 

[ime5000]

I k ow they will work it out. Especially if its just an o ring. I used a thicker juice now and the problem has seemed to go down too.
Sent from my HTC_Amaze_4G using Tapatalk 2

 

[digunderground]

Pics.....?

Vapor - here is the pic... and you can see it in person in a few weeks.. I'll be in roanoke, my GF goes to med school at Jefferson College. Ill be up there 27th - 30th, going see "Larry and his flask" at Martins down town, and probably blues BBQ & Alajandros a few times too. Love your town! PM me is there is any cool stuff going on or if you feel like meeting for a beer!



and just in case that embed doesnt work, heres a link

 

[Vapor2112]

Looks good on there.
And what? Nobody comes to ROA... Lol

I'll set myself a reminder and drop you a note closer to month end.. Very cool..

Blues BBQ is outstanding.

Vapor - here is the pic... and you can see it in person in a few weeks.. I'll be in roanoke, my GF goes to med school at Jefferson College. Ill be up there 27th - 30th, going see "Larry and his flask" at Martins down town, and probably blues BBQ & Alajandros a few times too. Love your town! PM me is there is any cool stuff going on or if you feel like meeting for a beer!

View attachment 134356

and just in case that embed doesnt work, heres a link

 

[jayson]

Tanks are being cut right now. Should have them this weekend as well.

 

[digunderground]

Tanks are being cut right now. Should have them this weekend as well.

Thanks, I'll look for them then! One last question. Are there any plans to offer replacement caps? im debating widening the air holes in it, but I wouldnt want to do that unless I had an avenue to purchase another.

 

[jayson]

Thanks, I'll look for them then! One last question. Are there any plans to offer replacement caps? im debating widening the air holes in it, but I wouldnt want to do that unless I had an avenue to purchase another.

I will check with him on that as well. There aren't any spares at the moment, but as long as the V2 cap is compatible I will order some extras.

 

[Flapenn]

Sadly my bliss is also leaking there is also a small chip missing on a part of the edge of my tank although I don't think that has anything to do with the leaking.


Sent by Jedi mind tricks.

 

[digunderground]

@ Jayson- Any low down on the TI Bliss? Is this going to be pre-order? limited run (I assume)? first come first serve? After really enjoying the SS one, I know lots of us are drooling at the idea of the TI.

 

[jayson]

@ Jayson- Any low down on the TI Bliss? Is this going to be pre-order? limited run (I assume)? first come first serve? After really enjoying the SS one, I know lots of us are drooling at the idea of the TI.

I will be meeting with Dave on Saturday. Not sure if we will do a pre-order but I will definitely have at least 100 of them on the site just as soon as they are available.

 

[Vapor2112]

bliSS arrived yesterday.

Appeared clean, but I did taste some machine oil on initial set-up (this one arrived in the pouch).

Drained the juice, cleaned it up better, and refilled.

First vape after thorough cleaning, is that juice on my tongue? Nope, flavor is THAT strong. VERY good flavor and vapor out of this and I only set it up with a single wick / coil to test it out.. Impressive.

I am also getting the dreaded leaking. From what I can tell, the larger o-ring "should" solve this. Hoping to find one locally this weekend, otherwise I will report back once the replacement is received.

Unfortunately, leaks enough that it will need to come back out of rotation until that is resolved...

 

[AlmightyGod]

Where are you guys getting leaking?

 

[Vapor2112]

From everything I can tell its condensation, etc coming down from the top cap. Ends up running down the sides of the tank which of course means removing both the top cap and unthreading the tank cover to wipe it up..

It certainly "seems" that a larger o-ring above the top cap threading will solve the problem.

Didn't have it running that long because of this, but I didn't see anything coming from the bottom or top of the tank, that seems sealed well so I'm pretty confident this will be an easy fix..

Where are you guys getting leaking?

 

[the ob]

I think, but am not entirely sure that mine is coming from the bottom maybe. I too, love this device, but have shelved it until I get the new o-rings. It is just leaking too much.

when I use it, the flavor is phenomenal.

do we know the new o-ring size? I thought it was number 14? is there a particular brand? Maybe we can find our own.

 

[tierrataz]

The one I picked up off the classys, used, had machine oil taste...ugh. That stuff is persistent! No wonder so many are popping up for sale. I didn't think it was leaking but when I picked it up this morning, juice all over my hand. Agreed I think it's the top o ring. Really sad I don't have a large o ring inventory as the vape is quite good.

 

[Vapor2112]

I'm going to see if the local Lowe's has an o-ring assortment hopefully later today.
Hoping something in HERE will do the trick...

 

[jayson]

I think, but am not entirely sure that mine is coming from the bottom maybe. I too, love this device, but have shelved it until I get the new o-rings. It is just leaking too much.

when I use it, the flavor is phenomenal.

do we know the new o-ring size? I thought it was number 14? is there a particular brand? Maybe we can find our own.

Yes it is a #14. I know Dave was using high quality o-rings. But I would imagine something from the hardware store could tide you over. I will have them in hand tomorrow.