The Erlkönigin : PICTORIAL

[Mackoy 09]

congrats my friend. is your aqua have a stock air hole? if so I would consider the erlk without the afc, to be about the same or even more open. I probably run my erlk tails about 1/3rd less then my aqua tails. good luck

Thanks bud. Ill take note of that. And yes aqua has stock air holes.


Sent from my iPhone using Tapatalk

 

[j3suss]

Hello friends,

I have it in my hands, the quality is pretty good material. But I was disappointed the little vapour. I think this has less vapour that atty kayfun Lite. Is it possible?

 

[Cloud Hunter]

Sorry, that sir you cannot generalize. Vapour production very much depends on your wicking technique, the used wire (resistance), the power you are firing up the tank with, and of course your e-juice. So, there are a lot of variables. Please try to clone (lol) this wick and I promise that the clouds are at least the same as with the average Kayfun build:



Hint: take a look at the cotton in the juice channels, it is very little and doesn't reach down to the end. I used a 28 gauge Kanthal A1 wire with 8 turns. Kicks in at about 1,2 Ohms.

Cheers & have fun,

C H

 

[qorax]

Hello friends,

I have it in my hands, the quality is pretty good material. But I was disappointed the little vapour. I think this has less vapour that atty kayfun Lite. Is it possible?

Hi, as CH correctly opined - pls tweak your build a bit and you'd get better VTF out of it than the K'funs. My Erlks beat my K'funs out in every aspect, and the vapour production is albeit way more than my six K'funs.

I've been a K'fun fanboy since their launch in 2012. Had seriously used them alone until Erlk happened. I still keep my K'funs/Russians, vape them off-n-on as well b'coz they are good, but are second best vis-a-vis the Erlks.

 

[j3suss]

Hi, as CH correctly opined - pls tweak your build a bit and you'd get better VTF out of it than the K'funs. My Erlks beat my K'funs out in every aspect, and the vapour production is albeit way more than my six K'funs.

I've been a K'fun fanboy since their launch in 2012. Had seriously used them alone until Erlk happened. I still keep my K'funs/Russians, vape them off-n-on as well b'coz they are good, but are second best vis-a-vis the Erlks.

Thanks friend!

And can you tell me a setup good??
I have done 1,5 ohms, microcoil, cotton. I left a lot of cotton in extreme the resistence but in the channel less cotton, like I have see here in this thread...

 

[j3suss]

Sorry, that sir you cannot generalize. Vapour production very much depends on your wicking technique, the used wire (resistance), the power you are firing up the tank with, and of course your e-juice. So, there are a lot of variables. Please try to clone (lol) this wick and I promise that the clouds are at least the same as with the average Kayfun build:

View attachment 372909

Hint: take a look at the cotton in the juice channels, it is very little and doesn't reach down to the end. I used a 28 gauge Kanthal A1 wire with 8 turns. Kicks in at about 1,2 Ohms.

Cheers & have fun,

C H

Thank you friend!

Then, I am going to try other setup. I have kanthal 29 AWG, AWG 26, and AWG 28.

 

[Thejack1]

Yeah, I'm expecting the build quality will be dreadful. Just hoping an atrocious knockoff doesn't put off potential buyers of the real deal by contagion.

Guy I know showed me his Rose clone....Not impressed. At all. Only reason I would ever purchase one, would be for the potential of unavailable spare parts..and that would also be a crap shoot.

 

[vapdivrr]

Hello friends,

I have it in my hands, the quality is pretty good material. But I was disappointed the little vapour. I think this has less vapour that atty kayfun Lite. Is it possible?

how high is the coil from deck? I know most probably use a drill bit and install coil with the bit down in between channel arms but for me, it seems a little low in that position almost like the airflow is being restricted. I have been raising the coil a bit which seems to me to be increasing vapor and smoothing out the vape.

 

[qorax]

My only worry is guys will pick up the clone/s, get ......-off and then bash this otherwise wonderful RTA left-right-and-centre Then chuck it off into their waste bin/s and be deprived of some superior quality vape.

Seen that with the K'funs ~ noticed a plethora of vapers nay-naying that pioneering design from SvoMestoe. Makes me feel bad - and sad

 

[qorax]

Thanks friend!

And can you tell me a setup good??
I have done 1,5 ohms, microcoil, cotton. I left a lot of cotton in extreme the resistence but in the channel less cotton, like I have see here in this thread...

I personally feel the "twin wick cotton build" is the simplest and foolproof one for anyone starting out with this RTA. Pls check the link below:

> Erlkönigin Cotton Wick: SIZING & SETUP in Pictures (Post #867) <

 

[Pardoz]

My only worry is guys will pick up the clone/s, get ......-off and then bash this otherwise wonderful RTA left-right-and-centre Then chuck it off into their waste bin/s and be deprived of some superior quality vape.

Yup, that's one place where how counterfeit-mad (some people in) the hobby get causes real harm. I had somebody tell me the other day he'd never consider buying a WAE or a ZNA because "they've got DNA30 chips, and I've read all about how terrible they are with mods catching fire and shorting out and stuff". As far as he was concerned, a DNA30 chip is a DNA30 chip, whether it's made by Evolv or by Hotcig. And to be fair I can see how he'd get that impression reading posts with titles like "My Hana DNA30 caught fire when I put in a battery!" instead of "My cheap FastTech counterfeit box with the janky counterfeit PCB isn't reading reisistance right". Same thing with atomizers - you see somebody complaining about how it leaks, or floods, or they had to drill out their own juice channels, or it didn't come with screws for the posts they rarely say "My ApartWorstCompetition counterfeit had this issue" they say "My Kayfun sux!".

 

[XBarbarian]

well.. it is what it is. Pardoz, Q, C H, ya just can't fix stupid.. ( not for buying a clone, but for blaming Name - like Erlkonigin or Kayfun ) when they actually bought a shady counterfeit.

momo's do what momos do.. and well.. I can only chuckle at their shenanigans!

ahh.. had a tank of Suicide Bunny Mother's Milk to see what the talk was about. ewww. the Queen is re wicked and tanked with the ol Lemon Bar, and.. ahh.. sweetness

 

[vapdivrr]

Yup, that's one place where how counterfeit-mad (some people in) the hobby get causes real harm. I had somebody tell me the other day he'd never consider buying a WAE or a ZNA because "they've got DNA30 chips, and I've read all about how terrible they are with mods catching fire and shorting out and stuff". As far as he was concerned, a DNA30 chip is a DNA30 chip, whether it's made by Evolv or by Hotcig. And to be fair I can see how he'd get that impression reading posts with titles like "My Hana DNA30 caught fire when I put in a battery!" instead of "My cheap FastTech counterfeit box with the janky counterfeit PCB isn't reading reisistance right". Same thing with atomizers - you see somebody complaining about how it leaks, or floods, or they had to drill out their own juice channels, or it didn't come with screws for the posts they rarely say "My ApartWorstCompetition counterfeit had this issue" they say "My Kayfun sux!".

man that is so true. I hear this all the time about people bashing certain attys, they say "this tank is terrible, it heats up so much it burns my lips, it leaks and is way over rated". I say is it a clone? "yes it is" well most likely that's the issue or its the particular build you have in it. hey im sure some clones are fine but to be so sure in your statements about how crappy this device is and generalizing it, really pisses me off .

 

[Thejack1]

Yup, that's one place where how counterfeit-mad (some people in) the hobby get causes real harm. I had somebody tell me the other day he'd never consider buying a WAE or a ZNA because "they've got DNA30 chips, and I've read all about how terrible they are with mods catching fire and shorting out and stuff". As far as he was concerned, a DNA30 chip is a DNA30 chip, whether it's made by Evolv or by Hotcig. And to be fair I can see how he'd get that impression reading posts with titles like "My Hana DNA30 caught fire when I put in a battery!" instead of "My cheap FastTech counterfeit box with the janky counterfeit PCB isn't reading reisistance right". Same thing with atomizers - you see somebody complaining about how it leaks, or floods, or they had to drill out their own juice channels, or it didn't come with screws for the posts they rarely say "My ApartWorstCompetition counterfeit had this issue" they say "My Kayfun sux!".

Sadly, the vaping community is ripe with potential Darwin Award winners.

 

[vapdivrr]

well.. it is what it is. Pardoz, Q, C H, ya just can't fix stupid.. ( not for buying a clone, but for blaming Name - like Erlkonigin or Kayfun ) when they actually bought a shady counterfeit.

momo's do what momos do.. and well.. I can only chuckle at their shenanigans!

ahh.. had a tank of Suicide Bunny Mother's Milk to see what the talk was about. ewww. the Queen is re wicked and tanked with the ol Lemon Bar, and.. ahh.. sweetness

never tried any lemon or lemonade type vapes, been looking to try something different, who makes it again?

 

[Pardoz]

ahh.. had a tank of Suicide Bunny Mother's Milk to see what the talk was about. ewww. the Queen is re wicked and tanked with the ol Lemon Bar, and.. ahh.. sweetness

Tried MM about a month ago, having heard people raving about it for ages, and it's one of those juices that I can agree is good, without actually liking it very much. Just doesn't match my flavour profile.

never tried any lemon or lemonade type vapes, been looking to try something different, who makes it again?

Can't speak to the Lemon Bar, but my current Lemonade Of Choice is Backporch Breeze by Steamy Vapor - nice tart lemonade, not too sweet, with a hint of mint on the exhale, definitely got to stock up some more next time I'm putting in a juice order. If you're into citrus-type vapes and don't mind juices that get seriously in your face, their Smack is excellent too - I liken it to a rugby scrum in a citrus plantation. Not something I can vape all day, but there are times when it absolutely hits the spot.

 

[jaxgator]

never tried any lemon or lemonade type vapes, been looking to try something different, who makes it again?

Clouds of Icarus.

 

[XBarbarian]

never tried any lemon or lemonade type vapes, been looking to try something different, who makes it again?

i swear I dont get paid by these people.. lol.. but it is a really darn good juice

Newportlocal and Jax-a-nator gator can confirm!

made by clouds of icarus

its a sweet lemon, not tart, with a powdered sugar exhale.. soooo delicioso!!

 

[vapdivrr]

Tried MM about a month ago, having heard people raving about it for ages, and it's one of those juices that I can agree is good, without actually liking it very much. Just doesn't match my flavour profile.



Can't speak to the Lemon Bar, but my current Lemonade Of Choice is Backporch Breeze by Steamy Vapor - nice tart lemonade, not too sweet, with a hint of mint on the exhale, definitely got to stock up some more next time I'm putting in a juice order. If you're into citrus-type vapes and don't mind juices that get seriously in your face, their Smack is excellent too - I liken it to a rugby scrum in a citrus plantation. Not something I can vape all day, but there are times when it absolutely hits the spot.

I have tried a pink spot, super citrusy vape before and it seemed to tart. im more of a sweet then tart when it comes to vapes , but thought maybe this lemon bar wasn't to tart and might be worth a try.

 

[vapdivrr]

i swear I dont get paid by these people.. lol.. but it is a really darn good juice

Newportlocal and Jax-a-nator gator can confirm!

made by clouds of icarus

its a sweet lemon, not tart, with a powdered sugar exhale.. soooo delicioso!!

cool, I was hoping it wasn't a too tart kind of juice, thanks