-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
The Erlkönigin : PICTORIAL
- Thread starter qorax
- Start date
- th_trl_thread_readers 0
- Status
Awwww do I have to order one too
might be a good time to pick up a nano kit. HmmBurping out loud using Tapatalk
Awwww do I have to order one too
Burping out loud using Tapatalk
Actually, no. It should have come taped to one of the ends of your box.
Awwww do I have to order one too
Burping out loud using Tapatalk
Like Jax stated above - it is in your box.
Well just found out the clone is sitting at my house awaiting my arrival. Another hour at work then another hour and a half to get home..... geez, anticipation sucks. Pics and review as soon as I get to playing with it. Rayon and kanthal already waiting. hopefully this works out better than the Russian fiasco.
hopefully this works out better than the Russian fiasco.
Well just found out the clone is sitting at my house awaiting my arrival. Another hour at work then another hour and a half to get home..... geez, anticipation sucks. Pics and review as soon as I get to playing with it. Rayon and kanthal already waiting.
Russian fiasco?! You ran amuck with the Russian mob?
LOL, no, couldn't get that thing to build correctly to save my life, leaked like mad, EVERY time. Kayfun, no problem, Russian, not once did I get it right. Or, something else went awry that went unnoticed.
I LIKE TURTLES!
Does anyone but me get that reference? Or do I need to post the video?
Love that! I think I posted a reply with that on another thread! Seriously funny s! The glazed look on that little kids face thru the interview and he just blurts that out!!
Update:
I'm down to 1/4 tank now (already!!!) and I haven't changed anything but the clouds are much thicker and it doesn't feel "wet" anymore. Taste is the same (good). I usually have a little more than 1/2 tank with my KFL+. I might try re-wicking again.
You will be using more than the KFL, because the KFL is almost miserly with how much juice it provides to the coil.
The bigger deeper juice channels, 1.4ohm coil vs 1.7ohm as well as the higher power 10W vs 7W.. will all result in better, more efficient juice consumption.
Even with the extra spacer mine wouldn't make contact on my Pvari w/ring (yeah, not a provape ring).
Nothing a small slice of air-line used as an extra spacer didn't fix. Ghetto mod for the win! lol
edit: Haha it censored the abbreviated version of For The Win. Forgot there was a second, not nice, phrase that abbreviates the same way. lol
Sometimes when you fill a fresh build, it is possible to slightly flood chamber and if you don't clear it, it could stay for a while. If you do find a slight gurgle after a fill you can clear it by doing this/ remove afc ring, loosen drip tip and turn cap to open fill holes, then blow hard thru drip tip for a bit. Once done, close fill holes and tighten back drip tip. This will push out juice from chamber thru the air intake at base near 510 threads. Once drip tip is tightened wipe away whatever juice that may have been forced out at the base. One thing to note, when blowing thru drip tip, the juice in tank will be bubbling, just like blowing thru a straw in a glass of water, if your juice levels are kind of high, just hold a tissue near fill holes in case it bubbles out.
I'm loving the vape on the ErlK. Granted I have a clone from Gvapers and not the original but it still rocks.
The only issue I'm having is the occasional leaking. I have tried a few different types of wicks. When I keep high shoulders and a little more KGD I don't get any leaking however I do get dry hits. Usually about half way through the tank I can start tasting burnt wick as well. If i keep less KGD in the wick and as a result my shoulders aren't that high my ErlK tends to leak more, I don't get dry hits though.
Is it just about finding the balance or am I doing something wrong?
The only issue I'm having is the occasional leaking. I have tried a few different types of wicks. When I keep high shoulders and a little more KGD I don't get any leaking however I do get dry hits. Usually about half way through the tank I can start tasting burnt wick as well. If i keep less KGD in the wick and as a result my shoulders aren't that high my ErlK tends to leak more, I don't get dry hits though.
Is it just about finding the balance or am I doing something wrong?
What you can try is to make the wick just right in coil ( your preferred amount not worrying about shoulder) then saturate wick and place a plug of cotton on top of existing shoulders. Don't make this plug to high, but just enough to add like 1 to 2 mm to existing shoulders. Then saturate these plugs and press them down and Matt to existing shoulders. Once this pad is wet, it will stay in place, just don't make them really high, Then I take another little pad and tuck it up under existing shoulders, these little pads are wedged between the deck and underside of original wick ends against channel arms, this also brings up shoulders slightly
Last edited:
Q now has five!!?? I cat even get my local B&M to get my first one! Soooooo jelly (insert sad face)
I have come to the conclusion that the erlk has a brain. When I first received it, i had a few issues here and there but after quite a few tweaks it seems I cannot make a bad build. What I think happens is the erlk needs to feel that perfection, once it does, it remembers it and replicates it most of the time regardless of the build. Or another possibility is that the erlk plays hard to get at first and does what it wants, but after a while it says" ok you have paid your dues and now I will cooperate".
Thanks! Will try a bit of extra padding with KGD on the shoulders tonight.
Isn't that how most successful relationships work!! We're talking about wives and girlfriends right??!
Last edited:
- Status
Similar threads
- Locked
