The Erlkönigin : PICTORIAL

[Sptz]

This is what the top of my mod looks like after almost a full tank of vaping my ErlP. Doesn't matter the type of wick I do, this happens, always.

 

[jaxgator]

Feel free to send some of those topless mods my way bud;-)

That situation is too be corrected shortly.

Monday, November 17, 2014 Location Time
4 Arrived at Sort Facility MUNICH - GERMANY MUNICH - GERMANY 20:59
3 Departed Facility in INNSBRUCK - AUSTRIA INNSBRUCK - AUSTRIA 19:00
2 Processed at INNSBRUCK - AUSTRIA INNSBRUCK - AUSTRIA 17:43
1 Shipment picked up INNSBRUCK - AUSTRIA 16:08

Look at you with two ErlKs already.

 

[Juggernaut666]

This is what the top of my mod looks like after almost a full tank of vaping my ErlP. Doesn't matter the type of wick I do, this happens, always.

View attachment 390205

View attachment 390207

View attachment 390206

View attachment 390204

It's gotta be that vapor shark, you should send it to me, it's no good to you now...... [emoji6]

 

[tchavei]

Mine has condensation (micro drops like when you have a hot bath and get water condensation on the mirror) but no actual leak...

Regards
Tony

Sent from my GT-I9195 through Tapatalk

 

[want to quit]

Does anyone know where I could find a oring that sits with the chimney to connect to the drip tip? I just lost mine to the sink after my first build and none of my kayfun o rings work.

 

[want to quit]

and if I can find them at home depot what size are they? Super upset as the first tank was freaking awesome but noooo I had to try out the nano kit

 

[redordead]

Didnt the nano kit come with an o-ring?

 

[KTMRider]

and if I can find them at home depot what size are they? Super upset as the first tank was freaking awesome but noooo I had to try out the nano kit

#60 o-rings from HD or Lowe's is thicker but fits.

 

[want to quit]

Will the tank also sit flush? I used my kayfun oring and the glass won't sit flush because it's too thick.

Thank you buddy

 

[want to quit]

Nope. I rings are probably expensive in Austria

Didnt the nano kit come with an o-ring?

 

[qorax]

Pls check this out - then approach your local HW store:

Have you lost your O-rings?

Where to buy it cheap:
#1: Orings and More - Search Results for "31MMB70"
#2: Orings and More - Search Results for "51MMB70"
#3: Orings and More - Search Results for "171MMB70"

Ps.: This is just an example with their corresponding part #s, obviously there are other places from where we can purchase our O-rings as well. Eg. theoringstore.com, oringsusa.com, parker.com etc.

 

[want to quit]

thank you very much Q

 

[want to quit]

have 350 o rings on the way in case someone runs into my issues lol

 

[KTMRider]

Will the tank also sit flush? I used my kayfun oring and the glass won't sit flush because it's too thick.

Thank you buddy

The #60 o-ring solved my leaky Erlk. I used it both with the stock o-ring and w/o. When you don't use the stock o-ring, it sticks to the chimney and will unscrew it with the top cap. Might be a good thing if you want to get to your coil w/o emptying your tank.

 

[winder]

Ha, like me eh! I too keep 6 flavours in my daily rotation. Thus, 5 x ErlQ/ErlPs and 1 x GEM. Slowly and steadily the Erlks replaced my K'funs/Russians as my mainstays!

Russians were my atty of choice before reading your thread and giving the ErlK a try. Now I've got to catch up.

 

[want to quit]

The #60 o-ring solved my leaky Erlk. I used it both with the stock o-ring and w/o. When you don't use the stock o-ring, it sticks to the chimney and will unscrew it with the top cap. Might be a good thing if you want to get to your coil w/o emptying your tank.

Thanks for the help buddy. Went to HD and found them. Everything sits snuck but there is a super tiny gap now between the upper and lower base. Works flawless though

 

[want to quit]

Pls check this out - then approach your local HW store:

Quick question. In the graphic it says there should be an o ring directly below where the coil sits? First of, there was none when I received the erl and secondly wouldn't the heat melt the o ring in a second?

Also, too late as I already placed an order with o ring junk street or whatever the site is called but are those o rings just as thick as the #60 once from HD or will those actually be a 1 to 1 duplicate of the o rings Erl sends to you?

Thank you guys.

 

[qorax]

Quick question. (1)In the graphic it says there should be an o ring directly below where the coil sits? First of, there was none when I received the erl and secondly wouldn't the heat melt the o ring in a second?

Also, too late as I already placed an order with o ring junk street or whatever the site is called but are those o rings just as thick as the #60 once from HD or (2)will those actually be a 1 to 1 duplicate of the o rings Erl sends to you?

Thank you guys.

1) That O-ring is under the base's Pos Insulator Plate. Between the plate and the base.
2) Those O-rings I linked are 1:1 to what i2r uses in their Erlks.

 

[want to quit]

Gosh that makes me sooooooo happy you have no idea.

1) That O-ring is under the base's Pos Insulator Plate. Between the plate and the base.
2) Those O-rings I linked are 1:1 to what i2r uses in their Erlks.

 

[want to quit]

You see that gap Q? I am so ocd this is freaking me the hell out. Out of all people you will probably understand