The GGTB Chubby

Status
Not open for further replies.

Torqueguy

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2011
1,409
1,788
Central Virginia
Hi guys
been gone a long time. Year end and meetings. Came home from travel on Saturday morning and after hugs and kisses, my wife and daughter went shopping and I went in the shop with Duke.

This is the Chubby
7A0F63FB-23AE-499C-82AF-DFCF97B94AB0-211-0000003C5F1F6120_zps1ef77364.jpg



Its a Brass TB cut down for one 16340
BAAA69A8-1350-45FD-942D-5A1C771066EB-211-0000003C710C6936_zps3d4a309e.jpg


Old School Ody running .9 Ohm Bish Twist and tribecca 24. Heaven
29A7F66C-4A20-4F03-AF9F-1EEBBE118822-211-0000003C49779FE9_zps9bdef2bc.jpg


The Chubby was a labor of love. Too many hours to be commercial unless I can mass produce some woodwork
352EE30E-F209-4018-BE8A-ACB47B9B3F74-963-0000011033E1B58F_zpsce00ecab.jpg


The 16340 is a good batt. With a .9-1.0 Ohm twisty coil, i get 20 hits, 15 are killer hits, 5 are still nice. The Ody dripper holds 20 drops so you need to top off once before batt runs out
71BC1923-3F9C-420D-80F9-0331E2638FF3-963-0000010DFACF03BA_zpsf3b2ed58.jpg


The Brass tube just slips in and out from the bottom under slight pressure.
A97F8531-034E-4857-B544-51E88D33F497-963-000000FEE69DDE36_zps26e9e2d2.jpg


The one that's really stealth and easier to make is the Mini Woodie
FE384730-6A5B-45C7-9B90-25D7BC97795F-503-000000797ACD7047_zps8db8cf2d.jpg


Somo, Imeo, Mata and Freight, I didn't forget you. You're next.
0B8F79DD-9738-4C4C-8576-462AE3B43ACB-963-00000102008FCCB3_zps2bfcce84.jpg
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Hi guys
been gone a long time. Year end and meetings. Came home from travel on Saturday morning and after hugs and kisses, my wife and daughter went shopping and I went in the shop with Duke.
FE384730-6A5B-45C7-9B90-25D7BC97795F-503-000000797ACD7047_zps8db8cf2d.jpg



Somo, Imeo, Mata and Freight, I didn't forget you. You're next.

Really like that one, would it be wide enough for Ody?
 

Torqueguy

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2011
1,409
1,788
Central Virginia
Torq, sorry that I ask but isnt this the design of a mod that dressed a metal mod with wood taking the idea from you I suppose?
Correct but that's ok. Emulation is a form of flattery! I learned that from you my friend.
The other mods use wires and electrical switched inside a wooden tube. The Chubby uses an all brass mini TB and all brass contacts plus your fantastic mechanical switch.
 

Torqueguy

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2011
1,409
1,788
Central Virginia
My purpose for the Chubby was to just house your GGTB and keep all of its wonderful refinements. All the contacts are brass including the post and contact pin. I wanted to give an option for people that like wooden box mods, yet do that with a GGTB. Unfortunately, its very time consuming to do. This was an experimental thing. I will make one more in Solid Ebony but first I must finish the second batch of Woodies

159BC319-A098-43B6-BFFB-30504D81A185-2624-000002107AB4C05A_zpse5a6b733.jpg


4CDFAF1A-2546-4EBE-8C6E-B939CDBFFAED-2624-00000210A8B0A657_zps98970177.jpg


D689596E-441B-485A-995D-D37287939F2E-2624-00000210AF9C9BDF_zps085dbd32.jpg
 

Torqueguy

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2011
1,409
1,788
Central Virginia
Here's my original Mini TB which I had Sterling Silver plated. This one, like all TB's has an all brass tube and brass contacts. The Silver plating is just for beauty and durability. This is my most stealthy one

ed34d3c6.jpg


Would there be interest in some of these? If so, we might be able to convince Imeo to make up another batch and i could wrap in veneer or silver plate. Not looking for more work! But if you guys are interested, I might find some free time if Imeo has the capacity
 

Torqueguy

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2011
1,409
1,788
Central Virginia
Torque all of your projects are simply astonishing :thumb:
The silver plated GGTB :hubba: how Bish would say..."forget about it!"

and do not worry about the woody second batch, it's beautiful to have a glimpse of the little baby shaping from now and then :)
Thanks Mata. Yours will be special. If I made these for profit I would be quicker but I am an OCD guy that makes them with love one by one
 

Torqueguy

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2011
1,409
1,788
Central Virginia
On second thought, thats an old picture on the Mini with standard GGTB caps. With oversized caps, it should be a better fit.

Anav
Good thought. Here's a fresh picture of the Mini with the oversized caps.

Imeo, note the button. Its one of your original hand made ones. I got it on a trade with a good friend from Italy.

As a lifelong engineer and hobbyist machinist, I admire watching your progress through the years with your designs and improvements. This "thing of ours" brings me much satisfaction. Growing older is a ..... but its nicer growing older with friends and watching our creativity shine through. Thanks for all you do for us Imeo. Yesterday, I signed up for a pre-order Ithaka. I didn't think I needed one with all my Ody's and Penelope's but I'm dying to see the improvements on the Ithaka.

081D7FE4-505C-4B4C-9A01-B90EFBDB2964-211-00000054F544FBE0_zpsbbfa600c.jpg


The fit is much nicer with the oversized caps
7945500B-2A12-4E18-9F2E-4010C91524D9-211-000000551270E82F_zps025aa66a.jpg
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
your wood work really amaze me Torq, you are the king of wood!! The new style of GGTB cover is exellent and I have to make some small GGTB for you to dress them.!:)

I agree that its a special feeling to have a nice company where all people are working and help each other for the best of the others and for themselfs. I hope that we have arcive this purpose on GG forum

Thanks for your nice words and for your wonderful work buddy:)
 

Torqueguy

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2011
1,409
1,788
Central Virginia
This is the Chubby insert, a cut down standard
9A64746E-6567-43BE-8491-90A2D1BEDB43-211-00000119BD9BEF22_zpsd4b36dd1.jpg


I'm still playing with the fit. Right now its a press fit
835E3749-9C3D-4B05-A262-36433EB10F0B-211-00000119C6274E2B_zpsb5707c18.jpg


With the insert pushed in from the bottom
4ED7AE8D-7994-4195-BDB0-90CBBED69622-211-00000119CC0E45B0_zps83b0101f.jpg


The original Ody Drip seems like its made for it
FA151F5E-06A9-42BF-AC13-EAB8B8475CFC-211-00000119D1D7F6F1_zps5366ab9e.jpg


I made it so that this fires with the ring finger which is my preference
3EBA3C3B-E9CC-4734-B111-EE04A48EEB1B-211-00000119D8356E05_zps2ce3f603.jpg


This weekend, AFTER i finish off the second batch of Woodies, I think I'll start on an Ebony Chubby
30362B2A-564D-4E98-A1D9-604544C0331A-963-00000103AE0C09AC_zps61990abd.jpg


Imeo, this one is yours
073421EA-9244-4E10-BC22-AFFEDF537386-803-000001236F9454E2_zpsbc08e75d.jpg
 
Status
Not open for further replies.

Users who are viewing this thread