The iHybrid APV - A fully Customizable Genesis

[DarklyNoon]

Go to the forums find Bear Brass mods house. The list thread is in there.
PM me if you can't find it.
He's closing this initial list at 25 paid orders and already had about 20 earlier.

Had to get on that list since bears are my spirit animals.

 

[Nurzrachit]

Wait, so there's another faceless guy running around somewhere?

Maybe he had his fingerprints removed with his face?

 

[silverbullit]

Sorry to hear about your run-in with the law Face. Know how you feel. My ex had me arrested for felonious B&E of "her" house. mugshot, fingerprinted, the whole nine yards. "Misunderstanding". But, I'm still a charged felon. That never goes away.

BTW, I'm a retired trooper. I would have taken a bribe, really! For a couple of LE's, I wouldn't have seen anybody's Face.

 

[neoexodus]

Oh, orings are size 5/8" OD 1/16" thick. All 3 of them. You don't have to remove any orings to remove tank, just twist the tank off. If you want a super tight and I meen super tight top cap fit, use a 3/4" OD with 1/16" thick wall. But I designed it to all be the same. I include a tight fit oring with all orders, even the ones I just shipped. The allen wrench is a 7/64 and thats for both screws. The positive screw is knurled and doesnt really need a tool. Orings of the sizes I mentioned can be found at ace hardware for about .10 cents.

O-Ring specs to whomever was looking for them yesterday afternoon / evening

 

[Shaitaan]

don't feel bad, he's not the only one that misquotes/mispronounces the word and of course its one word among many peeps can't get right lol...another one I LMAO about is how peeps pronounce 'axe' for ask, or new-cue-ler for nuclear

It's DELRIN! Not, Derlin or Duralin, or any of those other painful pronunciations, lol. I love your vids, but it gives me a headache hearing you say durlin. Just bustin your balls there Crash, please take no offense. Thanks for showin off the beauty of the HR!

 

[CHARGER72]

Hi guys. Hows it going? Hows everyone is doing well. Face did one of the other hybrid makers put the cops up to that. Lol

Love a good conspiracy.

 

[Shaitaan]

Mine came from Face with the mini tube in a piece of foam (and wrapped in paper), the tip, tank ring, and screw in a ziplock bag, and the rest in the hard plastic tube

mine came right from Face: tip, ring and screw in zip-lock... mini tube in foam pipe insulator...and apv in an even larger piece of foam pipe insulator only (not in plastic shipping tube like my red dragon)...box itself was jam pack filled with styro peanuts...no way of destroying it unless the box was put through a tree shredder, ran over by an 18 wheeler, a dog ripped into it, etc....

 

[Shaitaan]

Congrats on 3 years, I am just over 3 months and loving the change.


If he left his belt where the dog could get at it wouldn`t that be HIS fault??? His Cost?? Or are you just trying to keep the peace???


I traded my brother a SKS and a S&W 659 9mm for a Glock 17 back in the 90`s, the SKS was a $80 chinese POS. I received the Glock. I have fired the Russian ones with the threaded barrel and they seemed to be alot more accurate. I used to love going to the gun shops in PA Susquehanna County and buying a sardine can of ammo on stripper clips for $37.00 for like 600 rounds. I must have gone through about 30 of them cases. LOL Then the TC contender came out with a 7.62 X 39 handgun barrel and BAM no more steel core (cheap) ammo. OHH back in the good ole days.

hehe...I had the czech sks w/ bayonet and my brother still has his (his fav next to his semiauto 9mm Mac11 carbine), much better weapon than the chinese imo, paid $90 for it at the time, now they're going for well over $400 here. I wanted a TC contender way back then too....the great thing about it was the ability to change barrels, grips/stock and have any combo ya wanted.... I almost pulled the trigger on a .44mag w/ the 30-30 carbine acc'y option...

 

[Shaitaan]

Thanks. That was me

the 400w video was damn funny... sorry!

which video? any links?

 

[spraintz]

Hahaha, lemme axe ya a question about turnin some der-lin..... lol, priceless...

Face, do parts usually go "in-stock" about the same time as the mods go in stock?.........yes, I'm lookin for the new switch and the "thread ring"

thanks!!

 

[silentdoom]

Why am I getting gunk built up above the top two coils? I know I've heard over wicking- but it never tastes that flavorful. If anything, I'm having to tip more because of dry hits near the end of a draw? When I dry burn, its completely glowing? Thanks everyone

 

[Shaitaan]

LOL... Maybe she was right.

nah...you're cool AND kewl bro (calm, reserved, patient, etc, and have a bunch of neato toys, someone I'd not mind hanging with, etc)... something that kiddies aren't, especially pre-teens. they are uppity, over-exuberant, whiny, impatient, sometimes still throw 2 yr old temper tantrums when things don't go their way, very one-sided and very opinionated, usually ungrateful..all which by the way, isn't 'cool' or 'kewl'

 

[lithod02]

WHEW, back to work after being off for the last 14 days and a 12 hour shift to boot this sucks.
Does anyone know of a mod/tank that I can carry and/or lay down with out it leaking. Need something to bring to work, ATVing, out fishing, general beater but good and has decent taste??
I was using a Zmax with the AGA-t had it in my zip up jacket front pocket leaned against the tailgate of the truck and the 510 connector and AGA broke free from the body. I was able to wiggle it back onto the base but I am looking for something more reliable.

I had a couple AGA-T atop my provari and the didnt leak if layed down. It may be leaking because of the size of the wick or leaving out the fill screw. I was worried about my standard iHy leaking but it has yet to leave a leak spot laying it down or being in my pocket, it lays down when i sit. So i cant really recommend anything else, maybe a vivi nova on your zmax. I havent picked up my provari or anything else since I got my iHy month ago

 

[Shaitaan]

aarrgghh!!

I agree without a doubt, not my cup of tea

THIS on the otherhand

 

[Shaitaan]

My HellRaiser came today! But no tank ring or Allen wrench..hummmm maybe it wasn't supposed to come with one??.

they don't come with wrenches or allen keys...

 

[Shaitaan]

holy crud, bro!!! sorry to hear and hope ya screw em good for it....

dont know about yall but the past few weeks have been terrible, yall wouldn't believe what happened to me the past few days

Woke up jan 1st to state troopers at my front gate, I went out to see what was going on and was placed under arrest for Larceny, my wife and I were freaking out, they took me to jail and it was a holiday so I couldnt bond out or find anything about the charge until this morning. They took me to talk to the judge and had the wrong guy, I spent over 24 hours in jail for mistake in identity with felons, ..., that topped off the bad week I had prior, glad it was a mistake in idenity, it was a 20yr sentence, now I have to sue the county for pain and anguish, gonna have a field day with this one!! So how was everyone elses new years lol

 

[Chelseafn]

Sorry to hear about the jail time Face!! I hope you get em good!! Take them to the cleaners!!!

No jail iHy for me. Its not a good experience and dont ever want to be reminded of that! Prefer to forget that whole thing!!!

Russ at least its not Barney.

Good morning everyone!! Have a great day!

 

[Fisty]

I have a double koi fish tat on my shin that my cousin designed for me right before she passed, so there kind of special to me but i would love to see a koi fish on a LE, i know its prolly not everyones cup of tea, one like this would prolly have to be simplified to be engraved though...

A Koi fish has been #2 on the list for months, for personal reasons - I'm a Pieces. I was thinking a teal blue color for it. Check with your cousin if commercial use of their image is alright, it wouldn't need to be simplified, that would take to laser engraving really well. If you have the ability to get a higher pixel count scan that would be better though, the lower the pixel count the muddier the final product is when it coming from a drawing like that. Anyway.. PM me please so we can talk about it more and figure out the other elements, color, and if your cousin will let us use this awesome image.

 

[Fisty]

Er, missed that she was gone.. Check with her next of kin for usage, they would legally hold the rights to it.

 

[silentdoom]

I guess I'm just having problems making wicks. I've tried not oxidizing with the peter K, but it didn't tastes like the same Pluid :/ Not sure what to do. I'm having to tilt a lot with my current setup... Some people say they don't have to tilt at all!