The Innokin iTaste VV V3 owners group

[Maytwin]

Definitely something else to add to my "wish list"

 

[USMCotaku]

innokin just released a new MVP (though not the 3.0 with evolv chip I'm waiting to see ). It's the MVP20. 20 watts, arm32 chip, smooth vdc output, spring loaded 510. Sounds a lot like some of the new provari specs
Sent with one hand, the other is busy vaping.

 

[USMCotaku]

For those interested...
http://www.tasteyourjuice.com/wordpress/2014/12/04/innokin-announces-the-mvp20/
Sent with one hand, the other is busy vaping.

 

[Katdarling]

Hello USMC..... how be you. That "new" MVP looks a bit like the old MVP, no?

 

[USMCotaku]

Hello USMC..... how be you. That "new" MVP looks a bit like the old MVP, no?

I be good, other then being sick for almost 2 weeks now

It does look quite similar, except for the small differences, but it goes to 20 watts, has a spring loaded 510, and uses a 32 bit ARM chip according to that site. It's a reasonably dependable source. I'm still waiting on the MVP3.0 with the evolv chip, but the MVP20 could be a good step up for many

 

[Katdarling]

I KNOW you want your 30 watt.

It sounds a bit interesting to me, but really not all that much. I didn't care for the original MVP in any way (had 3, sold 3), and am now pretty much inundated with mods here. I'll keep my eye on it tho....... in regards to recommending it to others.

 

[USMCotaku]

I'm actually pretty happy with my istick for adv with one of my aerotanks, but some of my build I like to use just need more wattage....like this one for example

It's a dual stovetop at .4 ohms. Hits like a train on my mech, but now I need a 100 watt mod , I tried this on someone's @ 80 watts, and it went from hitting like a train to volcano status.

This was just from my mech

I did build a nice little dripper set up for my istick that works surprisingly well

All that said for most of my tank builds a good 30 watt is perfect for me (when my istick wears out, I plan on modding it by putting an adjustable or spring loaded 510 on it and putting a DNA30 board in it, as well as a good 2600 mah 20+ amp battery . It will then be the perfect all day mod for me)
Sent with one hand, the other is busy vaping.

 

[amoret]

I may have my excuse for a VV v4 sooner than I thought. Unfortunately, I seem to have killed my favorite green vine VV v3. It is now doing intermittent wonky electronic things - flashing, not firing, odd screen readings, etc. It will work fine for awhile, then go crazy. With my numb hands I drop things a lot, so I suspect that is the cause. Of course it had to happen to my favorite, newer one, not one of the older ones.

 

[Katdarling]

I may have my excuse for a VV v4 sooner than I thought. Unfortunately, I seem to have killed my favorite green vine VV v3. It is now doing intermittent wonky electronic things - flashing, not firing, odd screen readings, etc. It will work fine for awhile, then go crazy. With my numb hands I drop things a lot, so I suspect that is the cause. Of course it had to happen to my favorite, newer one, not one of the older ones.

WHAT?????????? Oh no!!!!!! Not the green vine!! My condolences amoret, sincerely.

I'm actually pretty happy with my istick for adv with one of my aerotanks, but some of my build I like to use just need more wattage....like this one for example

It's a dual stovetop at .4 ohms. Hits like a train on my mech, but now I need a 100 watt mod , I tried this on someone's @ 80 watts, and it went from hitting like a train to volcano status.

This was just from my mech

I did build a nice little dripper set up for my istick that works surprisingly well

All that said for most of my tank builds a good 30 watt is perfect for me (when my istick wears out, I plan on modding it by putting an adjustable or spring loaded 510 on it and putting a DNA30 board in it, as well as a good 2600 mah 20+ amp battery . It will then be the perfect all day mod for me)
Sent with one hand, the other is busy vaping.

Welp, I have very little comprehension of the builds but I sure do like the foggy pic! And I appreciate all you said ........from the comfort of my wimpy little consistent pre-manu'd vapes.

 

[USMCotaku]

I used to be perfectly happy with the pre-made coils, but I tried one out recently, and the difference was night and day. Not everyone wants to hassle with building tiny coils inside something like a kanger head, but if you do it you will be surprised at the difference in flavor, even at relatively low wattage. This is why I'm looking forward to the new kanger tank coming out....it uses either their new bpdc heads or a rebuildable RDA type head.... Something for everyone
Sent with one hand, the other is busy vaping.

 

[USMCotaku]

I may have my excuse for a VV v4 sooner than I thought. Unfortunately, I seem to have killed my favorite green vine VV v3. It is now doing intermittent wonky electronic things - flashing, not firing, odd screen readings, etc. It will work fine for awhile, then go crazy. With my numb hands I drop things a lot, so I suspect that is the cause. Of course it had to happen to my favorite, newer one, not one of the older ones.

If you are past warranty, you might think about opening it up to see if your ground wire is loose, or any other wire... Could be one of the solder points is cracked and a simple re-solder job could fix it

 

[Katdarling]

I used to be perfectly happy with the pre-made coils, but I tried one out recently, and the difference was night and day. Not everyone wants to hassle with building tiny coils inside something like a kanger head, but if you do it you will be surprised at the difference in flavor, even at relatively low wattage. This is why I'm looking forward to the new kanger tank coming out....it uses either their new bpdc heads or a rebuildable RDA type head.... Something for everyone
Sent with one hand, the other is busy vaping.

Yes, this is what I've heard, time and time again, but in truth, it has not been my experience. After vaping many (many) different builds, I realized quickly that much of it has to do with vape style as well. I'm a vaper pretty much like I was a smoker. I like my primer puffs, then have at it. I don't lung inhale. I enjoy the primer, then mouth to lung, and that style of vaping does not do well with low ohms, sub ohms, high wattage, RBAs, etc.

As far as enjoying what I vape? I actually do. I don't feel inclined to unicorn hunt or look for the next best. Four years of vaping have led me to this juncture and I must say..... I am pleased, finally.

 

[USMCotaku]

I mouth to lung on all of my tanks. I think one of my biggest issues with pre-made coil heads is the wicks used, the flavor is just not right to me. Kangers new bpdc heads are supposed to have organic cotton in them, and are supposed to fit in most of their older dual coil tanks. Perhaps I will like them enough that I won't feel the need to rebuild coils anymore. Now that I have a couple different regulated mods, I no longer sub ohm my kanger tanks. I tend to build them around 1.1-1.2 ohm.
I could stop where I am at....perfectly happy with the quality of my vape, but a combination of "oooh, look at the new shiny, I want that!" and a love of tinkering (like building stovetop coils) will keep me from doing so. Totally taking vaping into hobby status instead of just a way to stay off cigarettes
Sent with one hand, the other is busy vaping.

 

[USMCotaku]

Did this thread fall into a black hole?
Sent with one hand, the other is busy vaping.

 

[thespragg]

I hope not because I need a little help.

I recently purchased a VV v3 and for some reason can't access the VW setting, every time I press the + it just brings up the voltage again? Any suggestions?

 

[Topwater Elvis]

You press and hold for 2 seconds the down ( - ) button and the fire button to change modes, U for volt mode P for watt mode.

You can down load a the user manual in pdf from Innokin's site, bottom of the page ---> iTaste VV V3.0

 

[DavidOck]

Um, press and hold those to get into VV mode, press and hold the up (+) and fire to get to VW mode.

 

[Topwater Elvis]

Um, press and hold those to get into VV mode, press and hold the up (+) and fire to get to VW mode.

Yep, my mistake.

 

[Capt.shay]

Did this thread fall into a black hole?
Sent with one hand, the other is busy vaping.

When something works so well, you just don't need to complain about it on the webs You can go to the Istick thread for that

Looking forward to the 1000 Mah release and see if they make any other changes.

 

[PaulBHC]

Going to be interesting to see the pricing between the 800, 1000, 1200?, MVP20w, MVP3 X 2 versions?