-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
The Innokin iTaste VV V3 owners group
- Thread starter Pinggolfer
- Start date
- th_trl_thread_readers 0
- Status
What happened to this thread? Went from good info exchange about a wonderful mod to a poster bashing, vendor bashing argument. It is getting old real fast. My new Itaste (express kit with battery and charger) has 6 rivets and a sticker on the box. My first one from fasttech (full kit) came in the Itaste box with all the goodies (Iclear 16s, charging cable AND an instruction manual). I don't care to bash vendors, if you don't like them, don't use them!
Back to regularly scheduled programming please.
Back to regularly scheduled programming please.
Those ego cases look nice. Are they zipper or hardsided and would a medium one fit the vv 3.0 battery without a topper?
They all would fit a VV without a topper. The XL (what I have) will fit with a topper and I think the medium would work with a small topper like a Evod, but a Mini PT2 might be to long, as it barely fits in the XL. It's semi-hard and has a zipper.
From the Vapor Joe's Blog....
"Oddly, this price fixing does not put more money in the pockets of the manufacturer; only in the pockets of the vendor. Vendors pay very low prices for products and must resell them at a very high price. Vendors that discount these products are immediately targeted and turned in by other vendors. Competition is silenced."
That absolutely makes no sense...But whatever, there is plenty in the world that makes no sense to me...>
I am glad we are back to our regularly scheduled programming. I love this new battery. I have a chameleon on the way. The itaste vv3 really revolutionized my vaping experience.
On to more pleasant topics....What is your favorite topper for this device? I haven't tried any of the I-clears, I have Mini Protank II's and can't think of any better toppers. The I-Clears look interesting but all of those wicks make me think that they would go through juice like a bad boy and a lot of juice would be wasted in wicks, unless you vaped them completely dry.
"Oddly, this price fixing does not put more money in the pockets of the manufacturer; only in the pockets of the vendor. Vendors pay very low prices for products and must resell them at a very high price. Vendors that discount these products are immediately targeted and turned in by other vendors. Competition is silenced."
That absolutely makes no sense...But whatever, there is plenty in the world that makes no sense to me...>
I am glad we are back to our regularly scheduled programming. I love this new battery. I have a chameleon on the way. The itaste vv3 really revolutionized my vaping experience.
On to more pleasant topics....What is your favorite topper for this device? I haven't tried any of the I-clears, I have Mini Protank II's and can't think of any better toppers. The I-Clears look interesting but all of those wicks make me think that they would go through juice like a bad boy and a lot of juice would be wasted in wicks, unless you vaped them completely dry.
All I've used so far is Evods and a Mini PT2. Both of these work great. I do have a IBTanked 19mm standard carto tank due here any day, so I'm pretty excited to see how that works. 
This will be my first carto tank.
This will be my first carto tank.
So far I've used the iClear16's, ARO and T3. Have a couple T3S's on the way. I like the T3 best, figure the T3S's will be just as good. I was kind of disappointed with the ARO.
I like the Aro for glass, the T3 and T3S are good.
Might also want to look at the Davide mini, another glass BC unit that also looks good on the VV3, and has a replaceable drip tip.
Might also want to look at the Davide mini, another glass BC unit that also looks good on the VV3, and has a replaceable drip tip.
Taste test: I have 2 VV-3's and 2 MVP2's all set at the same wattage and I tried the same juice using a Mini ProTank2. Between the 4 mods the VV-3's IMO has the better taste. How can this be? I don't know but I enjoy the taste from the VV-3's better. Both the MVP and VV-3 take 5 turns to put on the Mini Protank so I'm baffled, but I do notice a taste difference.
I was looking at the Pbusardo review of the MVP V2 and it's wattage regulation seems to run a bit hot, but it's variable voltage is spot on.
I would dial in a voltage on the vv3 and then set the MVP to the exact same voltage. They should then taste the same.
The VV seems to have better regulation except at the 5 volt setting and anything above 10 watts due to it's size.
But in the 6 to 8 watt range it appears the VV 3 s a bit more "true".
I would dial in a voltage on the vv3 and then set the MVP to the exact same voltage. They should then taste the same.
The VV seems to have better regulation except at the 5 volt setting and anything above 10 watts due to it's size.
But in the 6 to 8 watt range it appears the VV 3 s a bit more "true".
Last edited:
I have been use to wattage, but that's a good idea and I will give it a taste try. Might have to fool around with the voltage first, burt worth trying.
One last thing, when making the comparison use the exact same tank and same atty. Even Kanger heads have slight variations in resistance from head to head. This will affect taste, especially if you are comparing in VV mode.
It's also quite possible the individual units' calibrations from the factory are not precise.
For example, industry standard resistors come in different "tolerance" values, and the cheapest are +/- 10%. So a 100 ohm resistor could be 90 - 110 and still be considered in range. If one unit is at the low end and one at the top, then there's a 20 ohm difference, in this example. (Not saying the calibration is +/- 10%, but I'm sure there's some acceptable range)
So if the VV3 is calibrated at it's low end and the MVP at the high end...
Even putting both into voltage mode - calibration variances may show up. Unless you measure them both under the same load with the same voltmeter... you don't really know if the readings are accurate.
Treat the display readings of power or volts as an indication, not calibrated values. And hope for repeatability on any given device.
For example, industry standard resistors come in different "tolerance" values, and the cheapest are +/- 10%. So a 100 ohm resistor could be 90 - 110 and still be considered in range. If one unit is at the low end and one at the top, then there's a 20 ohm difference, in this example. (Not saying the calibration is +/- 10%, but I'm sure there's some acceptable range)
So if the VV3 is calibrated at it's low end and the MVP at the high end...
Even putting both into voltage mode - calibration variances may show up. Unless you measure them both under the same load with the same voltmeter... you don't really know if the readings are accurate.
Treat the display readings of power or volts as an indication, not calibrated values. And hope for repeatability on any given device.
I use mini protank 2, removable tip version. The balance of the device seems a bit top heavy. If I balance it on my finger, finger on the button, with the included metal tip, it tips towards the tip....if I take it off, it tips to the button side. I need to get a lighter drip tip to put on, probable a rubber one, or delrin, and I think the balance will be better.
With a black VV and mini, it looks like it was designed that way. Very good looking. A black drip tip I think would look equally as good.
I must confess that I'm using my V3 much more than my VTR, even at home. I think the V3 is a really nice compromise of features and size. It feels good in the hand while watching TV or working in the garage. I actually tend to take the VTR out of the house with me more than the V3 since it is easier to pocket, and the V3 is so long. Then again, I pocket carry a steel frame .38 so the weight of the VTR doesn't stand out too much to me. I'd be bummed if I broke the tank off the threading on the V3 in my pocket. Nice little rig. The battery capacity is fine for me and I've only hit yellow once. Then again I only vape about 2ml tops a day @ 7.5W.
My "journey" (so far) CE4 => iClear 16 => T3S => Aspire BDC Glassomizer.
My ITaste VV's (3, again, so far) all have the Aspires. I find them tops for taste/vapor/TH.
As for the most "they look like they were made for each other" comments: the Black Aspire ET-S on the Black VV AND the SS Aspire ET-S on the Pearl Chrome VV.
Yes they are. I got one and it had the certificate of authenticity on the box and I scratched it off and verified it against Innokin's website. My Chameleon should get here this week. That will put me at three. I'll rotate them through.
I received mine Monday, ordered mine last Saturday, in my mail box Monday. It is the real deal, with the 6 rivets, charger and box with serial number on it. My second VV3
Hi All,
I recently sold a few of my mods, and I'm looking for something "small," with vv, which brings me here. I'm very close to buying one of these to try out, but one thing is bothering me: I'm not sure how it will look with several tanks that I use. I've been using mini-Protanks, Evods, and most recently, Aspire BDC's, I just can't picture how these "round" tanks will look with the "square" itaste. Anyone have any pics of the itaste with these tanks? Thanks in advance.
I recently sold a few of my mods, and I'm looking for something "small," with vv, which brings me here. I'm very close to buying one of these to try out, but one thing is bothering me: I'm not sure how it will look with several tanks that I use. I've been using mini-Protanks, Evods, and most recently, Aspire BDC's, I just can't picture how these "round" tanks will look with the "square" itaste. Anyone have any pics of the itaste with these tanks? Thanks in advance.
- Status
Similar threads
- Locked
