The Lemo RTA: A Build With Pics

[Highwayman1224]

Just got mine in the mail today. Sqirted some juice in the tank with the coil it came with. Forgot to prime the coil with juice . Did a few dry pulls & it's vaping nicely at 26 watts on my segelei 100 watt box mod. After this tank, I'll build my own coil on it. I'll probably order another one in silver so I can have both colors.

 

[Nailz]

Mine came from smoke-evolution via ebay, fast shipping and excellent customer service.

 

[Zanzabar78]

One question, I'm going to be using it on my Hana clone, works fine with my 22mm Russians, was wondering if the 23mm lemo will have trouble connecting since it might be bigger than the well groove on top of the hana

Has anyone tried this with a Hana?

 

[jakelov]

Just picked this rta up...... REALLY REALLY glad I did! Best quality, performance and aesthetic s I've had in an atty in a long time! Kudos to op for this build post.

 

[Dshobe]

It'll fit on a Hana, Zanzabar.

 

[VaPreis]

One question, I'm going to be using it on my Hana clone, works fine with my 22mm Russians, was wondering if the 23mm lemo will have trouble connecting since it might be bigger than the well groove on top of the hana

Has anyone tried this with a Hana?

I use one on my Cloupor Hana clone. Fits fine.



Sent from my KFSOWI using Tapatalk

 

[roxynoodle]

Yeah, the Hana is really made for 23mm tanks

 

[cjpeltz]

Can anyone upload a pic of the Lemo on the Hana Modz? Does the tank screw in completely into the recessed part?

 

[VaPreis]

Can anyone upload a pic of the Lemo on the Hana Modz? Does the tank screw in completely into the recessed part?

How about check the first post in the thread......

There's a pic of my SS Lemo on my Hana clone.

 

[RandyF]

I haven't seen this mentioned, so just a heads up. I received my 2nd Lemo and washed it out and let it soak in soapy water for a few hours. I let it dry over night and this morning I went to wipe it all down and the fill screw had built up rust while screwed in. It took me an hour to clean the rust from the threads in the fill hole. I should have taken it out anyway, but didn't think about it. So if you clean your tank be sure to remove it, clean it and dry it right away. Personally, I'm am not even going to use them anymore, just the silicone plug that comes with it.

 

[Mccannch]

Airflow screw or the fill screw?? Never used the fill screw, the silicone ring is too fantastic of a feature.

 

[RandyF]

Airflow screw or the fill screw?? Never used the fill screw, the silicone ring is too fantastic of a feature.

Yea, meant the fill screw. I will edit.

 

[RandyF]

I was thinking, after responding to another thread, if someone has the means and wants to make some money. Come up with a cool silicone type webbing that slips over the outside of the glass portion of the tank. I would imagine it can be made thin enough to be flush with the top and bottom cap, but would still provide enough cushion to protect it from tip overs and moderate bumps. Designs, colors, other tank systems, there are a ton of possibilities.

 

[Mccannch]

I just got around to putting my ss lemo into hybrid mode with my eVic Supreme. It looks cool but now I kinda wish they made a ss tank for these. Even though I like seeing juice levels in my tanks I think ss tank would look fantastic on this. Now I'm searching for smaller battery tubes for this thing. It never ends trying to find the perfect setup for me. [emoji20]

 

[VaPreis]

I haven't seen this mentioned, so just a heads up. I received my 2nd Lemo and washed it out and let it soak in soapy water for a few hours. I let it dry over night and this morning I went to wipe it all down and the fill screw had built up rust while screwed in. It took me an hour to clean the rust from the threads in the fill hole. I should have taken it out anyway, but didn't think about it. So if you clean your tank be sure to remove it, clean it and dry it right away. Personally, I'm am not even going to use them anymore, just the silicone plug that comes with it.

I've seen someone mention that before. Probably safe to say the fill screws aren't SS, which is a shame. I'll have to give the rubber fill plugs a try.

One of mine is perfectly clean after 2 months. The other show some signs of rust in the screw head.

Sent from my KFSOWI using Tapatalk

 

[Nailz]

I've seen someone mention that before. Probably safe to say the fill screws aren't SS, which is a shame. I'll have to give the rubber fill plugs a try.

One of mine is perfectly clean after 2 months. The other show some signs of rust in the screw head.

Sent from my KFSOWI using Tapatalk

I had problems with the fill screw getting rust on it when cleaning, but now using the rubber fill plug, and it's a lot easier to fill and no leaking issues with it.

 

[LReyes66]

Got my lemo today. Wish it was black.


It def is more preferred then my orchid cause my orchid leaks like crazy.

Sent from my Nexus 6

 

[cjpeltz]

How about check the first post in the thread......

There's a pic of my SS Lemo on my Hana clone.

Well that was 70 pages ago! This thread is longer than the Bible.

Well it does look nice. Does it screw all they down in the recessed part?

Also, anyone try this on a ZNA? Does it hang over at all?

 

[Mccannch]

I do have it on a Hana clone at the moment and it does screw down to the recess part nicely. Looks pretty sweet actually. Can't speak to the Zna as I don't have one.

 

[roxynoodle]

My fill screws get rust. But, my Lemo didn't come with the silicone plugs.