The Line RBA & Silica

[mwa102464]

Wanted to try Silica in my line tonight and this works really well using 2mm Silica. Make a loop in your wick then turn your kanthal around the silica like the pics below show, then feed one leg of the wick down through the center hole with the needle and make it so the top of the wick loop is right around even with the higher poll and with the one side of the wick going all the way down into the tank then cut off the second leg of the wick at the center hole. Tie one side off on the lower post, holding the needle pull on the other other wire and tie around upper post. The cut the wick loop in the center so both pieces of wick are sticking up nice and straight as pics show. This set up runs very nice producing nice thick tasty vapor and is a dam good vape, if ya have a line ya might want to give this a shot, I know mesh is what is supposed to go in a Genesis Atty but heck this is super.

 

[craftmath]

I think I need another line.... One with ss wick and another for silica. Haha.... I'm actually using the line right this minute instead of my newly purchased ody. I'm so gonna get blasted for saying that. Haha... Very happy with my line purchase.... And my ody too. I plan on setting up the silica when this coil gets gunky.

 

[mwa102464]

Craft dont even wait, just do it,,, I just went through 2 full tank fulls of juice in no time at all with this set up, it's a beast of a vape with exceptional flavor and big plumes.

4 full wraps got me 1.7ohms on this set up and dam its good.


The way this is set up the wick stays perfectly wet and the same all the time, feeds perfectly every dam vape, you take a pull and it feeds, simple yet extremely effective, anyone who has a line this is a must try. Could even be super with some other Genesis type Atty's too, I have a few others I'm going to set up like this myself. Flavor is just dam good with nice thick vapor.

 

[thatick]

hell i havent even got the SS wool to try your ody setup and you throwing more homework at me lol

 

[craftmath]

MWA and his tricks.... Now I need some 2mm wick. All I have is the 3mm that was included with the ody. It should work though.

 

[thatick]

he stopped me or i would have been vaping brillo pads in my ody lol

 

[craftmath]

And a used brillo pad at that.... talk about a soapy taste in the ody.

 

[mwa102464]

And a used brillo pad at that.... talk about a soapy taste in the ody.

You goofball ya have to use the right SS Mesh

 

[mwa102464]

This mod vapes like a monster, went through 3 tank fulls since last night, the wick stays perfectly wet every pull you take with great flavor and vapor, try this guys I'm telling ya its better then the mesh when using this line.

 

[johnlacie]

This mod vapes like a monster, went through 3 tank fulls since last night, the wick stays perfectly wet every pull you take with great flavor and vapor, try this guys I'm telling ya its better then the mesh when using this line.

Awesome, will definitely try this out on my Lines since my 400 mesh doesn't seem to be giving me enough vapor production.

Other than the center hole of the Line, could the other hole (Line V2) be used as well? Just wondering.

 

[borncrosseyed]

Thank you mwa,this works and tastes way better than mesh IMO . Mesh=metal and juice, silica=JUICE!
And 3mm wick in the DID works just as well.

 

[mwa102464]

Awesome, will definitely try this out on my Lines since my 400 mesh doesn't seem to be giving me enough vapor production.

Other than the center hole of the Line, could the other hole (Line V2) be used as well? Just wondering.

NO, You want that other small hole to be open. let us know how you like this once you set it up, been using this now on my Line for a long time, the wick and coil set up like this last a very long time haven't had to change mine yet and the flavor and vapor is super.

 

[mwa102464]

Just a few more pics of my set up, you can leave the wick looped at the top or just snip it in the center so you have two straight wicks coming straight up. This set up is easy to do and is a seriously great vape with super flavor and huge plumes of vapor, anyone that has a Line would surely want to try this, will work on any Genesis type Atty I'm sure. It's nice if you want to use something other then mesh on your Genesis Atty's for a change of pace. I like this better then a 510 Atty with the flavor & Vapor it puts out. Plus you can now carry a full tank of juice and not have to drip and get Atomizer quality vape but even better.

 

[par292]

where did u buy this silica wick?

 

[mwa102464]

@ Par292

A few different vendors sell it, you can check Bruce at COV I think he has it.

 

[*~Peace~*]

Thank you just ordered my wick.

 

[WillyB]

Just a few more pics of my set up, you can leave the wick looped at the top or just snip it in the center so you have two straight wicks coming straight up. This set up is easy to do and is a seriously great vape with super flavor and huge plumes of vapor, anyone that has a Line would surely want to try this,

Looks like cotton yarn, Have you tried cotton yet?

 

[mwa102464]

This one is made from all Silica WB, yes I have tried Cotton.

 

[johnlacie]

This one is made from all Silica WB, yes I have tried Cotton.

How was the cotton? I tried cotton for a few days and I couldn't clean out the stain from my old juice. Also I've gone back to a silica wick since I fear that the cotton will burn leaving a strand inside the Line. That would surely be a PITA to remove.

 

[craftmath]

No more stainless steel wicks for me.... The line is great with silica. BTW mwa, I fixed my line v2.