The Nicoticket Approved Delivery Device Advice Thread

[brookj1986]

I ordered a REO!!! I can't wait... it didn't really plan to, but after going on a road trip and spending a few days over at someones house, I realized the awesomeness of the design.. and how I could benefit..and that I should have saved a few hundred dollars and headaches by listening the first time

Ill post pics when I get it. I ordered it yesterday after 3pm est, and the tracking number was on PayPal last night ..

I got a copper vein with brass button cover and a rm4!! Can't wait.....

Congrats, you'll love it! That's a great setup!

I assure you it won't be long until you've got your 2nd one!

Distro and I were on the same ordering schedule for our first 2. Then he got a 3rd and got all these fancy toys from classies in the wee hours of the night.

Sent from my Galaxy Note 3 via Tapatalk.

 

[taki1203]

I ordered a REO!!! I can't wait... it didn't really plan to, but after going on a road trip and spending a few days over at someones house, I realized the awesomeness of the design.. and how I could benefit..and that I should have saved a few hundred dollars and headaches by listening the first time

Ill post pics when I get it. I ordered it yesterday after 3pm est, and the tracking number was on PayPal last night ..

I got a copper vein with brass button cover and a rm4!! Can't wait.....

Nice, just a word of caution the Copper Reos can develop tarnish on the finish so if you want to keep it looking like new you might want to put some sort of clear coat on it before you use it.

 

[Mark Howard]

^ this cannot be overstated. Mine went very dark in just a couple weeks and I can never get that look back. Going to refinish it eventually as it just looks like mud now

 

[brookj1986]

Need to get some polish for my stingray. It's so cloudy looking. (That after two days use). Any recommendation for a copper/brass polish?

Sent from my Galaxy Note 3 via Tapatalk.

 

[JPinSTL]

Need to get some polish for my stingray. It's so cloudy looking. (That after two days use). Any recommendation for a copper/brass polish?

Sent from my Galaxy Note 3 via Tapatalk.

Barkeeper's Friend

Amazon.com: Bar Keepers Friend® Cleanser & Polish: 12 OZ: Health & Personal Care

 

[motabrownie]

Need to get some polish for my stingray. It's so cloudy looking. (That after two days use). Any recommendation for a copper/brass polish?

Sent from my Galaxy Note 3 via Tapatalk.

I use Mothers Mag Polish I got from Walmart. Works great on my copper Stingray

 

[distortoblotto]

I ordered a REO!!! I can't wait... it didn't really plan to, but after going on a road trip and spending a few days over at someones house, I realized the awesomeness of the design.. and how I could benefit..and that I should have saved a few hundred dollars and headaches by listening the first time

Ill post pics when I get it. I ordered it yesterday after 3pm est, and the tracking number was on PayPal last night ..

I got a copper vein with brass button cover and a rm4!! Can't wait.....

Congratulations B4!

 

[Shoebunnie]

The girls with some new jewelry.

 

[distortoblotto]

Need to get some polish for my stingray. It's so cloudy looking. (That after two days use). Any recommendation for a copper/brass polish?

Sent from my Galaxy Note 3 via Tapatalk.

Flitz......

 

[Mark Howard]

View attachment 361314

The girls with some new jewelry.

Nice tip on the black grand!

 

[distortoblotto]

Congrats, you'll love it! That's a great setup!

I assure you it won't be long until you've got your 2nd one!

Distro and I were on the same ordering schedule for our first 2. Then he got a 3rd and got all these fancy toys from classies in the wee hours of the night.

Sent from my Galaxy Note 3 via Tapatalk.

LOL Distorto likes toys. Next time I'm up in the middle of the night, pop on by. I'll make a pot of fresh ground coffee and we can cruise the classies together!...

 

[PersimmonNJ]

Ok, could use some input...I have a Reo LP Mini with R2 and consistently able to build 1.8 ohm coils and while flavor is ok, not sure how to tweak to et more. When I built coil around 1.3-1.4, it was just too hot (so dunno how you folks who use lower ohms manage it LOL). I have tried shifting the coil position lower and higher and not noticing much difference.

 

[distortoblotto]

Are you using the stock intakes? Lower Ohms = more heat. More air =less heat. If you want lower ohm's you need more air. Example: I prefer my coil at 0.8 ohms on my RM2. The stock intake made the vape too hot for me. I started enlarging the size of the intake hole one drill bit size at a time. Ultimately for me the answer was dual 5/32 intakes. Your results may very....

 

[PersimmonNJ]

Are you using the stock intakes? Lower Ohms = more heat. More air =less heat. If you want lower ohm's you need more air. Example: I prefer my coil at 0.8 ohms on my RM2. The stock intake made the vape too hot for me. I started enlarging the size of the intake hole one drill bit size at a time. Ultimately for me the answer was dual 5/32 intakes. Your results may very....

View attachment 361599

Ah ok...I have liked the stock hole in terms of draw (tend to dislike too-airy...use the 2nd smallest hole on my Nautilus for example) and guess I have been afraid to enlarge the hole cuz cant undo it...lol

 

[distortoblotto]

If you like the tighter draw, you may wish to go with the same size intake on the other side to start. If you like the draw the way it is, your only alternative is to build your coil up or down a few points to suit your temperature preference.

 

[distortoblotto]

Oh, and one more point. The draw from opening up the intakes can also be adjusted through the drip tip. Example: Say somethig like a Russian style drip tip vs say a 2Puffs wide open style drip tip.

 

[PersimmonNJ]

Are you using the stock intakes? Lower Ohms = more heat. More air =less heat. If you want lower ohm's you need more air. Example: I prefer my coil at 0.8 ohms on my RM2. The stock intake made the vape too hot for me. I started enlarging the size of the intake hole one drill bit size at a time. Ultimately for me the answer was dual 5/32 intakes. Your results may very....

View attachment 361599

Ok got brave and enlarged hole a little (figure small increments test test test cuz cannot go back LOL) went from 1.10mm to 1.45mm and draw still ok (not too airy) and after 3 tries got ohms to 1.7 (ugh I seem to automatically build 1.8-1.9 lol) and already it's better.

 

[distortoblotto]

One less wrap should put you around 1.4 (give or take) which was where I preferred the RM2 with the stock intake.

 

[taki1203]

Are you using the stock intakes? Lower Ohms = more heat. More air =less heat. If you want lower ohm's you need more air. Example: I prefer my coil at 0.8 ohms on my RM2. The stock intake made the vape too hot for me. I started enlarging the size of the intake hole one drill bit size at a time. Ultimately for me the answer was dual 5/32 intakes. Your results may very....

View attachment 361599

Cyclone AFC caps open allllll the way for me.

 

[PersimmonNJ]

One less wrap should put you around 1.4 (give or take) which was where I preferred the RM2 with the stock intake.

1.4 with stock intake was super hot for me...