RDA The Odin a Rebuildable Atomizer by Loki Labs
- Thread starter super_X_drifter
- Start date
- th_trl_thread_readers 0
- Status
Here's where I'm at with the Odin. I just can't stop reaching for it. It just pro-freakin-duces. I have gotten so acclimated to the wide open airholes that vaping my chalices feels like trying to drink a Wendy's frosty thru a cocktail straw. I'm sure the size of the airhole in the chalice (1/16") has a lot to do with that.
I'm thinking that if the chalice had another opposing airhole (even though it's a single coil atty) it would change the vape more to my liking.
But this kids not gonna even attempt to mod a damn near $200 atty. Nope. Im trading my latest one for another killer modded Odin and will use some of the cash thrown on top in the deal to get one of Craig's BF versions (and some extra screws / Orings). I'm In this for the haul and want to have spare parts baby.
This is the atty for me. I never thought I was missing anything until I tried this Odin and now I have fallen off the deep end for thick warm insane quantities of vapor.
I'm a dual coil .57 net resistance full on sub ohm pimp now and there's no turning back. None.
The Odin looks absolutely beast on a LP grand or an OliveR, and even a clumsy patienceless dork like me can mount up two micro coils in minutes.
Threading the KGD is also very easy and I never thought id say this but I get about 6 or more choker hits between squonks and every hit is just plain perfect. I like it. I've never singed the cotton and could prolly go more hits but why F around when all I have to do is squeeze the bottle to reload.
I'm also gonna get more AW 1600's cause these dual sub ohm builds gnaw right thru a battery in a few hours.
I will still have a chalice for my woodvil and find that on my golf cart ( which the kids and me tool around on a lot ) the big air intakes on the Odin produce sort of a ram air effect when the wind coming thru the open windshield hits it and it weakens the effect. The small single air works best when in turbulence.
Now I can't wait till almost every mod I grab is locked and loaded with Odins. Hell yeah.
I'm thinking that if the chalice had another opposing airhole (even though it's a single coil atty) it would change the vape more to my liking.
But this kids not gonna even attempt to mod a damn near $200 atty. Nope. Im trading my latest one for another killer modded Odin and will use some of the cash thrown on top in the deal to get one of Craig's BF versions (and some extra screws / Orings). I'm In this for the haul and want to have spare parts baby.
This is the atty for me. I never thought I was missing anything until I tried this Odin and now I have fallen off the deep end for thick warm insane quantities of vapor.
I'm a dual coil .57 net resistance full on sub ohm pimp now and there's no turning back. None.
The Odin looks absolutely beast on a LP grand or an OliveR, and even a clumsy patienceless dork like me can mount up two micro coils in minutes.
Threading the KGD is also very easy and I never thought id say this but I get about 6 or more choker hits between squonks and every hit is just plain perfect. I like it. I've never singed the cotton and could prolly go more hits but why F around when all I have to do is squeeze the bottle to reload.
I'm also gonna get more AW 1600's cause these dual sub ohm builds gnaw right thru a battery in a few hours.
I will still have a chalice for my woodvil and find that on my golf cart ( which the kids and me tool around on a lot ) the big air intakes on the Odin produce sort of a ram air effect when the wind coming thru the open windshield hits it and it weakens the effect. The small single air works best when in turbulence.
Now I can't wait till almost every mod I grab is locked and loaded with Odins. Hell yeah.
Last edited:
I absolutely love the Odin. I have a fair collection of RDAs, and the Odin has rapidly become one of my favorites.
Craig said that the centerposts should be finished next week and then it's just assembly. Based on that, I'd estimate two to three weeks.
This atty rocks Joe.
OK, you sold me. Picked up an Odin in the classies and it should be here by Tuesday. Can't wait to mod it and see what's got you all worked up
I like seeing a reonaut try low ohm builds with wide open airflow and enjoy
I came at Reos from the opposite direction, loving subohm builds and drilled out airflow on my mechs and RDAs. I tried one of the little reomizers and it was nice, but I didn't get the most out of my Reo until I got a BF Zenith. If you like that Odin, I bet you'd love the Zenith, you can get even more airflow and the delrin in the cap lets you go even lower on the ohms without too much heat. Around .3 ohms with wide open airflow Zenith on my Reo is the ultimate for me, the end of my search for the perfect vape.
You've sold me on the Odin, tho. Always need to try the new thing
I wish had the skills to mod one, I'll just have to wait for the bf version
Russ do you know if they going to be sold as bottom fed atomizers or if they will sell just the center pin? Wanting to know if I should wait or try one out now.
Ken
Ken
Hah I saw that one and almost bought it. You got it before I could decide. 
OK, you sold me. Picked up an Odin in the classies and it should be here by Tuesday. Can't wait to mod it and see what's got you all worked up
They will be on our site in 2 weeks. Complete units or a BF base(for existing owners).
We don't plan to sell just a pin/post due to liabilities. These are pressed together and not something everyone has the ability to do it properly. Someone can easily do it wrong, hurt themselves and blame me.
Rather save the headache.
Sent from my SCH-I605 using Tapatalk
We don't plan to sell just a pin/post due to liabilities. These are pressed together and not something everyone has the ability to do it properly. Someone can easily do it wrong, hurt themselves and blame me.
Rather save the headache.
Sent from my SCH-I605 using Tapatalk
Thanks for the answer SoCalCraig. I guess I'll just wait for the BF version. No reason for me to buy two bottom decks when I only use BF mods now.
Please let us Reonauts know when and where we can buy one when you release them. lokilab.com?
Ken
Please let us Reonauts know when and where we can buy one when you release them. lokilab.com?
Ken
They will be on our site in 2 weeks. Complete units or a BF base(for existing owners).
We don't plan to sell just a pin/post due to liabilities. These are pressed together and not something everyone has the ability to do it properly. Someone can easily do it wrong, hurt themselves and blame me.
Rather save the headache.
Sent from my SCH-I605 using Tapatalk
Hey SoCalCraig, I asked this question earlier in the thread and didn't get a response so I will ask again. Any possibility to get maybe a smaller diameter version of the Odin? Say anywhere from 14mm to 18mm? BF of course... I think a 14mm version would sell exceptionally well to the REO clan alone...
Sorry I didn't see the question.
As for a smaller diameter, there would need to be plenty of demand to justify it. As of now with our other current products in prototyping and production I dont see it happening any time soon.
Sent from my SCH-I605 using Tapatalk
Yes Ken, they will be in lokilab.com when available and I will post here to let you know.
Sent from my SCH-I605 using Tapatalk
Craig, if you sold only 1/2 of what Rob sells of the RM2, (which I would image would be on the low end), you would have some very good sales potential. I could see you selling as many if not more than Vicious Ant sells of their Cyclone's... I think the demand would be there and then some... 14mm diameter would fit on any of the REO devices right now, but I feel with the way the low profile models are selling more people would prefer something in the 17-19mm range...
I totally get what you're saying. Currently have 4 projects going of new products. I can honestly say, I dont have the time to make it. Maybe in the future though.
Sent from my SCH-I605 using Tapatalk
OK... I'm interested. My 2 grands aren't LP though. Russ, where did you get yours milled down?
Mike, not sure the Odin's design would morph well into a 14mm atty. There would be very little room to build and the width of the wells would be miniature.
What I'd rather see is an Odin with the eccentric slot for single coil taken out and the other slots centered on the wells. Not complaining cause I love this Atty but that's the only improvement I could even think of
Rock on Craig
Rob (redeyedancer) mills regulars to Low Profile if you send it to him. I think it's $20 plus you paying for shipping.
Just got home from work to find an Odin waiting to greet me. Won't have the chance to play until Wednesday, can't wait!
What I can say so far is it's a solid piece, no cutting corners here, it's got some good heft to it
What I can say so far is it's a solid piece, no cutting corners here, it's got some good heft to it
- Status
Similar threads
- Locked
