-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
The ProVarinati Diner & Saloon #5
- Thread starter The Ocelot
- Start date
- th_trl_thread_readers 0
- Status
I can't take it anymore...
Anyone hear about the lady who sat on Pinocchio's face and yelled, "LIE TO ME, LIE TO ME!"
REPORTED!
You guys remember when I posted about my little flavor rack that I made? It took me almost 1 week to build the basic part of the stand, and a few more days to cut and get the little guard rails up. It took that much time because all the wood was cut with a circular saw, and I had to sand down all the edges to get them straight, if you don't remember, this was it.
I had planned from the start to make 2 of these, but I really wanted to make a few changes to my design, but that meant that I was going to have to make more cuts that was going to make it more difficult, to make everything straight. So I looked online for a reasonable solution, and I found this.
Ryobi 10 in. 15 Amp Table Saw-RTS10G - The Home Depot
I set it up on Friday, and read up on how to use it. I was amazed, I got everything done on it this weekend except the little guard rails, and the poly coating. I just needed to share this with someone, this opens up a lot of possibilities.
KAS
Nice rack (Hehehehehehe)
Morning everyone
This is a little different kinda of a question to me, some people try a sub-ohm tank with a coil around .5Ω and they are around 25 to 30 watts and it's to warm and or to much vapor for them.
I tell them to turn down the wattage and adjust airflow and maybe try a higher ohm coil
I would guess if you went with a 1Ω or higher you could go with less air flow and still get a cooler hit.
I have the full size Subtank on my P3 with the air flow wide open and .66Ω coil at 20 watts which at 20 watts the burst don't work so I have to hit it a few times in a row to get a good hit from it.
I also have Unicorn Blood in it which is a very strong tasting juice to me, so I don't need my normal big hit.
I vape most my sub-tanks between 25 and 30 watts with the air flow wide open except for my Herakles and Atlantis II, I vape them more around 40 watts but air flow still wide open.
For me, I find if the air is not wide open the hit is too warm plus the tank gets too hot and changes the taste of my juice.
I like a big throat hit but not to warm.
So I would think that them big air flows help to keep the tank cooler too.
A sub tank with a sub ohm coil would or should give you a bigger throat hit / more vapor then the same tank with a 1 or above ohm coil at the same wattage.
I would say a sub tank with a coil above 1Ω would be more like an older KF with a ton more air flow.
Thanks Chief, that pretty much affirms what I thought. I wound up at 14.6W on this now .61 coil at the middle setting. I really only got this thing for the ability to use the rebuildable deck, and want to pick up a couple extra decks for it so I could just have them ready to swap out. It's weird that the P3 keeps changing it's mind about what the resistance of the coil is!? 61, .62- I'm glad my juice costs next to nothing, because this thing is a HOG!
Oh yea it should come with a warning that it will suck up 3 times the juice
Maybe the resistance is teetering and actually changing that little. I'm no Zen, but it seems to me it wouldn't take hardly anything at all to change it .01 one way or the other.
Thank You,
R'Ported!
Said the pot to the kettle!
- Status
