The Provarinati Saloon IV - Back Alley
- Thread starter Kn0ttYFive
- Start date
- th_trl_thread_readers 0
- Status
Everything I've read says yes. I'm buying one in another 2 weeks. Had to save up for it after my Chalice buys.
Chief got one.....trying to think who else did but I'm not remembering [emoji20]
Sent from my iPhone using Tapatalk
I have been reading some reports for those using the DNA40 that they are having problems with the spring, the spring carries current, and is messing with the OHMS, but those using kanthol have had no issues.
KAS
I'm pondering another tank, but I don't think I'll drop that kind of $ this time...
Every one I look at seems to have 1 feature I don't like though!!
Suggestions welcome -
::I'm gonna build, not interested in buying coil/heads again
::I'd like something not as finicky about wicking as a kayfun
::I'd like something kind of compact. I'm OK with 3 mls if it's shorter (like a LemoDrop looks nice to me)
::I want air flow adjustment that works - I go back and forth from Mouth hits to lung hits, never making it to HUGE air
::Any kind of fill-up is fine, as long as it doesn't involve maintaining vacuum by covering holes while flipping things over, etc.
::Ready to give up, but I'd be extra interested if it could be set for a single or dual coil...
What would you get?
Lemo Drop? don't like the AFC
Silverplay? Looks kinda big and overdone
SubTank? Too danged big
Youde Goblin? (not out, but it's interestingly simple)
There's a bunch of others, too - mostly seem to me to be "variations on a Kayfun"...
What have you found that's leak-free, with really adjustable air, and a smaller form?
Any suggestions?
Every one I look at seems to have 1 feature I don't like though!!
Suggestions welcome -
::I'm gonna build, not interested in buying coil/heads again
::I'd like something not as finicky about wicking as a kayfun
::I'd like something kind of compact. I'm OK with 3 mls if it's shorter (like a LemoDrop looks nice to me)
::I want air flow adjustment that works - I go back and forth from Mouth hits to lung hits, never making it to HUGE air
::Any kind of fill-up is fine, as long as it doesn't involve maintaining vacuum by covering holes while flipping things over, etc.
::Ready to give up, but I'd be extra interested if it could be set for a single or dual coil...
What would you get?
Lemo Drop? don't like the AFC
Silverplay? Looks kinda big and overdone
SubTank? Too danged big
Youde Goblin? (not out, but it's interestingly simple)
There's a bunch of others, too - mostly seem to me to be "variations on a Kayfun"...
What have you found that's leak-free, with really adjustable air, and a smaller form?
Any suggestions?
Here I go again, being of no help!!
I was thinking about getting a drop but then I read its 23mm and I think the provari is 22mm? It would bug the crap outta me if it didn't sit flush.
I've probably had my kfl's for a year and I have never had a problem with wicking or leaking. They work flawless every time and I'm completely happy with them, maybe that's why I find it so hard to order something new.
If you go with a drop, I'd love to hear what you think of it! [emoji16]
Sent from my iPhone using Tapatalk
I like mine, I am down to using 3 tanks, KF4, Lemo/Lemo Drop, and the Kanger subtank.
I honestly have 2 Atlantis that was waiting for me when I got home and I haven't even opened them yet
I ordered them when they had that 50% off.
The KF4, I'm sure you seen the review but it's true, once you get your head around it, it's a very nice tank.
First time getting it apart is a challenge, once you do get it apart lube the crap out of it, every o-ring on the thing.
Once I got it apart for the first time, The only trouble I had was it got stuck together once. I probably over tightened it
Which that's part of the confusing part, you twist it to take it apart but you twist it to open and shut the juice flow control
Twist it one way to much or to hard and it will get stuck
Got to put a little screwdriver in one of the air flow holes and find something to hold it with that won't scratch it to get it apart
The Top fill is state of the art, top of the line, best on the market, I can't say enough on how nice and easy it is to fill.
Building on it is easier than any other KF was because of the extra 2 screws on the deck.
Wicking is easier than the other KF's I just do it like PBusardo does in his video and it has never flooded or leaked on me yet.
I am having issues with my P3 so I have my KF4 on my Ti until I figure out what is wrong with it
I think it's worth the money.
I never seen a clone yet, but I find it hard to believe they can copy it 1:1 and sale it for cheap and still be as good as the authentic
But if the clone sux, leaks, or whatever I wouldn't hold that against the authentic.
It was for a thread to post selfies over in General Vaping Discussion. I was playing with the filters I didn't know were in the webcam.
I like mine, I am down to using 3 tanks, KF4, Lemo/Lemo Drop, and the Kanger subtank.
I honestly have 2 Atlantis that was waiting for me when I got home and I haven't even opened them yet
I ordered them when they had that 50% off.
The KF4, I'm sure you seen the review but it's true, once you get your head around it, it's a very nice tank.
First time getting it apart is a challenge, once you do get it apart lube the crap out of it, every o-ring on the thing.
Once I got it apart for the first time, The only trouble I had was it got stuck together once. I probably over tightened it
Which that's part of the confusing part, you twist it to take it apart but you twist it to open and shut the juice flow control
Twist it one way to much or to hard and it will get stuck
Got to put a little screwdriver in one of the air flow holes and find something to hold it with that won't scratch it to get it apart
The Top fill is state of the art, top of the line, best on the market, I can't say enough on how nice and easy it is to fill.
Building on it is easier than any other KF was because of the extra 2 screws on the deck.
Wicking is easier than the other KF's I just do it like PBusardo does in his video and it has never flooded or leaked on me yet.
I am having issues with my P3 so I have my KF4 on my Ti until I figure out what is wrong with it
I think it's worth the money.
I never seen a clone yet, but I find it hard to believe they can copy it 1:1 and sale it for cheap and still be as good as the authentic
But if the clone sux, leaks, or whatever I wouldn't hold that against the authentic.
I was trying to decide if I wanted the K4 or the ERLK, I could not do both at the same time. I could not make up my mind, so I ordered nothing, then this morning Provari showed that they had both of the TI's in stock, and I ordered them.
That was what I really wanted to order in the first place. I guess next month, I will decide on the other 2, along with the rusgar, I was going to order that anyway.KAS
I really love my Lemo and Lemo Drop.
AFC you mean you can turn down the air flow why would one do that
LOL I like the wide open hit it has so I never even touched the AFC on it.
I heard a rumor that Kanger is coming out with a nano tank for the Subtank
If you like the Kayfun then you should love the KF4
Pros of the KF4 compared to the other KF's (my opinion)
Way easier to fill
easier to build
easier to wick
air flow is 10x better
Look and feel, hard to explain and it might be just me, but when you hold it and see it in person it just feels and looks like a fine tune machine or a work of art.
Like sitting in a really expensive car, you can tell the quality that went into it.
Cons
Cost
getting it apart for the first time
holds less juice
AFC
you mean you can turn down the air flow why would one do that LOL I like the wide open hit it has so I never even touched the AFC on it.
I heard a rumor that Kanger is coming out with a nano tank for the Subtank
If you like the Kayfun then you should love the KF4
Pros of the KF4 compared to the other KF's (my opinion)
Way easier to fill
easier to build
easier to wick
air flow is 10x better
Look and feel, hard to explain and it might be just me, but when you hold it and see it in person it just feels and looks like a fine tune machine or a work of art.
Like sitting in a really expensive car, you can tell the quality that went into it.
Cons
Cost
getting it apart for the first time
holds less juice
I was trying to decide if I wanted the K4 or the ERLK, I could not do both at the same time. I could not make up my mind, so I ordered nothing, then this morning Provari showed that they had both of the TI's in stock, and I ordered them.
KAS
I really like my ErlPrinz Kaz. It is atypical and has a small learning curve but the flavor and the vape are par excellence. =) I like filling from the top and at roughly 45 dollars it is a great value.
Last edited:
- Status
