-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
The ProVarinati Saloon, V3
- Thread starter Train2
- Start date
- th_trl_thread_readers 0
- Status
Ughhh, stupid camera roll, Verizon, and all that crap on my pic, lolol! I should just give up
Sent from my iPhone using Tapatalk
HOLY CRAP!!!!!!!!! So glad you are ok and now my thoughts on DIY just flew out the window. Yikes!
And congrats on the 2nd REOMine should be here next week with the RM3 and an Odin BF. Super excited
I will check my statement.
Alright REO Lovers... As much as I dislike the box mods, I wanna give a REO a test drive and see if I like it...
I DO like dripping on a mechanical, and that's pretty much what's happening on a REO right? Just feeding the juice up from the bottom instead of dripping it in from the top?
Anyway... I think I'd rather have the 18650 box, so that's the REO Grand, yes?
I've seen folks using a lot of different atomizers on these things though, and I'm thinking that's where my confusion comes from. I know I want a bottom feeding atomizer, but what is the best setup? There's a lot of options out there... LoL Are folks using single coil? Dual coil?
All you REO lovers, your input is greatly appreciated!
I DO like dripping on a mechanical, and that's pretty much what's happening on a REO right? Just feeding the juice up from the bottom instead of dripping it in from the top?
Anyway... I think I'd rather have the 18650 box, so that's the REO Grand, yes?
I've seen folks using a lot of different atomizers on these things though, and I'm thinking that's where my confusion comes from. I know I want a bottom feeding atomizer, but what is the best setup? There's a lot of options out there... LoL Are folks using single coil? Dual coil?
All you REO lovers, your input is greatly appreciated!
Hehehe about time
1) yup! The only difference between dripping and squonking is instead of dripping from the top, you squeeze the bottle, which feeds juice up to wet the wick, then sucks the excess back
2) there are a number of bottom fed options out there. Popular ones include the rm2, atomic, cyclone AFC, the odin, zenith v2. I ADORE the atomic and cyclone, and I have a zenith and a CLT otw. I alternate between dual and single coil. Personal preference really.
3) since you're looking at different options and want 18650, the Low Profile (LP) grand is uour choice. A credit card Is wider and taller than it
4) there is a guy on ECF called chowderhead. He can mod just about any RDA into bottom feeding for a fee
Burping out loud using Tapatalk
As Kiwi said you definitely want to get the LP Grand, lot more choices for atomizers. Depends on your preference for what atomizer to get, I always recommend the rm2(or reomizer), as I still prefer it over all my bf attys for flavor, as I am primarily a MTL vaper. For straight lung hitting right now I prefer my Zenith but I have an Odin on the way.
Ok, what's the skinny on an orchid, I know absolutely nothing about it?
Hehehe about time
1) yup! The only difference between dripping and squonking is instead of dripping from the top, you squeeze the bottle, which feeds juice up to wet the wick, then sucks the excess back
2) there are a number of bottom fed options out there. Popular ones include the rm2, atomic, cyclone AFC, the odin, zenith v2. I ADORE the atomic and cyclone, and I have a zenith and a CLT otw. I alternate between dual and single coil. Personal preference really.
3) since you're looking at different options and want 18650, the Low Profile (LP) grand is uour choice. A credit card Is wider and taller than it
4) there is a guy on ECF called chowderhead. He can mod just about any RDA into bottom feeding for a fee
Burping out loud using Tapatalk
I actually think bottom feeding an atty is superior to standard dripping, because you can use as little wick as possible and get even better flavor
Alright, so I was checking out the web site for the REO, and there are 5 different versions of the RM RDA's...
Is there any significant differences between the different variants? Or are they all just different looking?
I'll check out the others as well...
Now that I'm looking, I've seen the Cyclone on a LOT of REO's... Where do you get those guys? Only found one vendor so far
Is there any significant differences between the different variants? Or are they all just different looking?
I'll check out the others as well...
Now that I'm looking, I've seen the Cyclone on a LOT of REO's... Where do you get those guys? Only found one vendor so far
Wogay lemme answer both at the same time.
Some folks will know that I LOOOVE the fogger v4. Dual coil RTA. Superb flavor and insane vapor production. It's soooo good.
But. My biggest gripe is that it has a 2 post wire capture system like so:
It's hard to get good and equal connection unfortunately.
The orchid is similar in that it's a dual coil RTA. But where it is superb is it has a helios-like post structure like so:
In terms of vape, they are pretty much identical. Huge flavor and vapor. The deck itself is almost identical, so wicking style and capabilities are the same.
But man. The posts structure of the orchid just makes it DEEAAAAD easy to build.
Unfortunately, it suffers from the same critical flaw as the damned Aqua. Stupid thing has a capacity of approx 2ml.
That's just the worst idea EVER. This is an atty made for dual coil sub ohming. Face palm.
Other stuff that's not so fly
1) it has no fill port. You've gotta do the top full method. I hate it.
2) it has no AFC. There's only 2x fixed 2+mm airholes.
RM2: tiny chambered, insulated deck, NO AFC. Meant for single coil
RM3: tiny tiny chamber, NO AFC, has 3 posts meant for dual coils, although there is a single coil version with one air hole.
RM4: it's essentially the ehpro atomic RDA clone. Three posts for dual coil, HAS AFC that allows both dual and single coil. Tiny chamber. SUPERB flavor and you can actually blow ginormous clouds with those
RM5: these are the double cross clones. Which are kinda like the zenith v2 but with different AFC. Has three posts, HUGE airflow AFC, and ginormous post holes.
That's for the review! I've been curious about them!
Sent from my iPhone using Tapatalk
It's a dead easy atty to build, and if you like a looser draw / semi lung inhale, you'll like it.
However unless you alternate between many atties a day, the 2ml is gonna be a deal breaker. 2ml for a dual coil atty is just. Silly.
ETA: you won't need to subohm with these too. Use 12 wraps of 30ga around a 2mm drill bit will give you a dual coil with exactly 1.2ohms. That's how I've been vaping my foggers.
Last edited:
- Status
Similar threads
- Locked
