The Rose: Rebuildable Silica Atomiser

Status
Not open for further replies.

nelsonm64

Ultra Member
ECF Veteran
Verified Member
Apr 27, 2013
2,621
2,564
Kelowna, B.C.
hey all, i just discovered this little beauty. it seems to be the best of a few top atty's currently out. the SQuape and the Ithaka come to mind. i hoping to get one down the road... check out the video (thanks to Scott) and let me know what you all think!

REVIEW OF THE ROSE ATOMISER FROM EDENMODS.CO.UK - YouTube
 

t8kiteasy

Ultra Member
ECF Veteran
Verified Member
Sep 22, 2012
2,690
1,980
60
virginia beach
hey all, i just discovered this little beauty. it seems to be the best of a few top atty's currently out. the SQuape and the Ithaka come to mind. i hoping to get one down the road... check out the video (thanks to Scott) and let me know what you all think!

REVIEW OF THE ROSE ATOMISER FROM EDENMODS.CO.UK - YouTube

Yea i caught his review when it came up and the Rose looks to be a sweet little rta.I like that they took the Vapeonly BCC style along with the Ithaka and put it in a bigger package,easy rebuilding and filling.The airflow control they used is also an added feature i like with this device and the placement of it making it extremely easy to adjust,and making it a full 2mm airhole is sweet.I am planning on selling off some gear i no longer use to get the funds together to purchase one of these badboys.The Rose will be the next hot seller for rba's.
 

Technonut

Vaping Master
ECF Veteran
Verified Member
Oct 11, 2010
5,090
7,291
62
East Coast, USA

Technonut

Vaping Master
ECF Veteran
Verified Member
Oct 11, 2010
5,090
7,291
62
East Coast, USA
It was about $200.00 including shipping. There were about 150 units in this initial first round. I don't think there will be any more lists, just vendor sales. From what I gather, they should start showing up for sale within a couple of months.. Perhaps sooner. :) I'm looking to see mine within a couple of weeks.

EDIT: The few issues Scott pointed out in his vid review have been addressed and fixed.. :)
 
Last edited:

Speedfreek

Moved On
Jun 21, 2013
21
6
42
Herts, UK
  • Deleted by Misty
  • Reason: unregistered associate/supplier

Technonut

Vaping Master
ECF Veteran
Verified Member
Oct 11, 2010
5,090
7,291
62
East Coast, USA
Folks have been receiving the Rose for the past couple of days, and it has been a BIG hit! :)

Mine should be shipping out this week. ;) Eden Mods should be congratulated for completing this project, and a job well done.

IMO, the Rose incorporates the best features of the Ithaka, Kayfun, and Taifun GT. The coil attachment method works very well to be rid of posts or screws that get in the way, and leaves plenty of room for many types of creative builds in the ceramic cup.

The included build-stand is quite handy, and doubles as a holder for rebuilding / refilling, since the Rose does not need to be drained to do so. ;)

Keep an eye open towards Big Buddha Vapors soon to purchase one... From what I gather, a small amount will be headed their way from this 1st run. :) After that, it may be awhile before more are available.

https://www.facebook.com/BigBuddhaVapors


Here are a couple of the latest user reviews:

The Rose Atomiser

ROSE REVIEW


EDIT: Here are a couple of vids of the the pre-production version:

http://www.youtube.com/watch?v=De32B1hxw1c


 
Last edited:

Technonut

Vaping Master
ECF Veteran
Verified Member
Oct 11, 2010
5,090
7,291
62
East Coast, USA
Rose finally made it today.. She's a winner for certain IMO. :) The machining, fit, and finish.. Excellent! I really like the coil attachment method... It leaves plenty of room in the ceramic cup. The AFC, and juice-control both work well, and the Rose produces a saturated, flavorful vape. :vapor: I have a simple micro-style coil of AWG 28, and XC-116 installed now, and I am liking it more than the Ithaka or Kayfun. I am looking forward to some dual micro-coil builds soon. ;) Damn good design here. :toast:

(Click To Enlarge)

 

nelsonm64

Ultra Member
ECF Veteran
Verified Member
Apr 27, 2013
2,621
2,564
Kelowna, B.C.
Rose finally made it today.. She's a winner for certain IMO. :) The machining, fit, and finish.. Excellent! I really like the coil attachment method... It leaves plenty of room in the ceramic cup. The AFC, and juice-control both work well, and the Rose produces a saturated, flavorful vape. :vapor: I have a simple micro-style coil of AWG 28, and XC-116 installed now, and I am liking it more than the Ithaka or Kayfun. I am looking forward to some dual micro-coil builds soon. ;) Damn good design here. :toast:

(Click To Enlarge)


interesting you like it better than the Ithaka and Kayfun, they are the 2 in my arsenal that i find the best and most reliable! now, i have to have a Rose! damn you Technonut ;)
 

Technonut

Vaping Master
ECF Veteran
Verified Member
Oct 11, 2010
5,090
7,291
62
East Coast, USA
Anyone know the release date for this? Are you still liking it technonut? Do you think its better than the kayfun?


From what I gather, there are enough Rose attys for a small shipment to Big Buddha Vapors, and they will be sent after the 150 folks on the list are taken care of. The last shipments of those are about finished. If I had to guess, 3-4 weeks until they show up. (Don't hold me to this.. Eden Mods (Lee and Andy) are all about great quality control, and are making sure every Rose is perfect before it goes out. These guys are assembling each by hand)

As far as still liking it... VERY MUCH! ;) :) I am surprised about how much better the flavor is (to me) than the Kayfun or Ithaka. The Rose has many nice features which work well together. It has a reduced chamber on top of a roomy ceramic cup, which helps in the flavor department. There are 4 entry points (controlled) for juice to enter the wicks, and air-control. The design just about assures a damn good vape.

I also enjoy not needing to drain the tank to dry-burn, or rebuild. ;) I shelved all of my other attys in favor of two Sophia RBAs until Rose arrived. She has officially made it into my rotation. I see myself getting another when possible. :vapor:
 

Technonut

Vaping Master
ECF Veteran
Verified Member
Oct 11, 2010
5,090
7,291
62
East Coast, USA
Here's a quick pic of the Rose on my Hana Modz Pack V2... :) The large (23mm?) recess around the Hana's 510 connector is a really nice feature.


IMG_1987_zps08a17c8c.jpg
 

nelsonm64

Ultra Member
ECF Veteran
Verified Member
Apr 27, 2013
2,621
2,564
Kelowna, B.C.
Here's a quick pic of the Rose on my Hana Modz Pack V2... :) The large (23mm?) recess around the Hana's 510 connector is a really nice feature.


IMG_1987_zps08a17c8c.jpg
Nice! i really, really want one of these! however, i hope they figure something out with the ceramic cup and NOT replace it with something non ceramic! i heard they where looking into an alternative...
 

Technonut

Vaping Master
ECF Veteran
Verified Member
Oct 11, 2010
5,090
7,291
62
East Coast, USA
Nice! i really, really want one of these! however, i hope they figure something out with the ceramic cup and NOT replace it with something non ceramic! i heard they where looking into an alternative...


Thanks! :) I read some about cups breaking, but had no issues with mine yet. I'm just careful with it. ;) The cup isn't necessary for Rose to work. I do think the ceramic is one of the reasons for a better flavor though. Same with Sophia and Ithaka.

The Rose has the right combination of features for a great vape. I have not had any flooding, gurgling, or leaking at all either. Two Sophia's and Rose are all that I reach for these days. It's nice to finally have some devices which just plain work well, and are pretty easy to rebuild and maintain.
 
Status
Not open for further replies.

Users who are viewing this thread