"The Russian" 91% (Kayfun Lite Clone With A Twist)

[ceejay]

Have a question about the draw. Can it be set to a larger draw than the kfl?

 

[Coldpunk]

I think so. I don't have any technical info to back this up though. With the airflow control screw removed it felt much airy-er than the lite.

Which is why I now have two 91%'s and no longer have the Kayfuns.

 

[finagle69]

With the airflow screw out, I'd guess it's about twice the airyness of my KFLs. With it in, but screwed flush with the body of the R91, I guess I'd say it's somewhere around 1.25 to 1.5 times the airyness of the KFLs. I leave mine out for lung hits.

 

[mekc57]

I got my R91 yesterday and like it so much I ordered the kayfun lite plus an hour after I got it set up and vaping. We'll see which is better when the KL+ gets here!

 

[finagle69]

View attachment 271168I got my R91 yesterday and like it so much I ordered the Kayfun lite plus an hour after I got it set up and vaping. We'll see which is better when the KL+ gets here!

Awesome. Just ordered a + as well.

Sent from my HTC One using Tapatalk

 

[donnah]

for those of you waiting on vaportekusa's shipment... it's now in Cincinnati Ohio!

Waybill: 4958568123
Customs status updated
Sign up for shipment notificationsExternal Link / New Window
Saturday, November 09, 2013 at 8:17 PM
Origin Service Area: HONG KONG - HONG KONG - HONG KONG
Further Detail:
Next Step:
Destination Service Area: ATLANTA, GA - AIKEN - USA
Saturday, November 09, 2013 Location Time
8 Customs status updated CINCINNATI HUB, OH - USA 8:17 PM

7 Departed Facility in HONG KONG - HONG KONG HONG KONG - HONG KONG 8:51 PM

6 Processed at HONG KONG - HONG KONG HONG KONG - HONG KONG 8:14 PM

5 Arrived at Sort Facility HONG KONG - HONG KONG HONG KONG - HONG KONG 4:34 AM

4 Departed Facility in HONG KONG - HONG KONG HONG KONG - HONG KONG 4:00 AM

3 Processed at HONG KONG - HONG KONG HONG KONG - HONG KONG 4:00 AM

Friday, November 08, 2013 Location Time
2 Customs status updated CINCINNATI HUB, OH - USA 9:35 AM

1 Shipment picked up HONG KONG - HONG KONG 10:10 PM

Shipment Details... Help
From To Shipment Information
Hong Kong , Hong Kong VAPOR TEK USA
Aiken , . 29803
United States of America Ship Date: 11/08/2013
Pieces: 8
Total Weight: 163.2 lbs Note on Weight
Ship Type: Package
Shipment Reference: 8809882751
Service: EXPRESS WORLDWIDE nondoc
Description: ATOMIZER DEVICE NO NICOTINE

Geezz.. it's not enough that I track my own packages..now I track my vendor's packages

 

[Krizzell]

Have a question about the draw. Can it be set to a larger draw than the kfl?

The new Kayfun plus has adj air control like the 91% but it's on the bottom ( don't like that you have to remove it just to adj it...stupid) looking for another 91% I just ordered the large Plexiglas tank hard to find them in stock.

 

[nelsonm64]

The new Kayfun plus has adj air control like the 91% but it's on the bottom ( don't like that you have to remove it just to adj it...stupid) looking for another 91% I just ordered the large Plexiglas tank hard to find them in stock.

im with you on the bottom air screw. i mentioned i didnt care for it like that in the kayfun lite plus thread and they jumped on me haha.

 

[peterforpats]

im with you on the bottom air screw. i mentioned i didnt care for it like that in the kayfun lite plus thread and they jumped on me haha.

and i'll say here what i said there- how often do you adjust the airflow once you have it dialed in the way you like it? when you change liquid or coils you have to remove it anyway, so what's the big deal. with the screw on the bottom there is no danger of losing it especially if you have it loosened-can't fall off if the mod is directly underneath it. i have a r91 and never mess with the draw once it is the way i like it- will be the same with the kfl+............

 

[Krizzell]

I adjust the airflow sometimes having to remove the whole thing just to make a small adj makes no sense. I think it was done that way just to be different.

 

[peterforpats]

I adjust the airflow sometimes having to remove the whole thing just to make a small adj makes no sense. I think it was done that way just to be different.

it was done because it is the easiest and fastest way to modify the existing kfl to compete against the r91%. no need to redesign the base when all you have to do is drill a short hole to the airway and add a screw......

 

[nelsonm64]

and i'll say here what i said there- how often do you adjust the airflow once you have it dialed in the way you like it? when you change liquid or coils you have to remove it anyway, so what's the big deal. with the screw on the bottom there is no danger of losing it especially if you have it loosened-can't fall off if the mod is directly underneath it. i have a r91 and never mess with the draw once it is the way i like it- will be the same with the kfl+............

and i'll say what i said before, i adjust the airflow quite often. i didn't say it was a stupid idea, just that i didnt care for it... and wondered what they where thinking when they did it like that. you seem to be taking this personally, wth.

 

[nelsonm64]

for all of you awaiting the vaportekusa pre-order according the DHL it arrived and was signed for... finally, been a long wait but i think it will be worth it.

 

[puchox]

View attachment 271168I got my R91 yesterday and like it so much I ordered the Kayfun lite plus an hour after I got it set up and vaping. We'll see which is better when the KL+ gets here!

I did the same, i'll probably retire my cartos and ithaka

 

[mekc57]

I did the same, i'll probably retire my cartos and ithaka

I don't want to vape anything else!!! I still have the coil in it I set up the first day, 1.7 ohm micro with cotton and have chaged the cotton for different flavers but not because they burnt up.

 

[peterforpats]

and i'll say what i said before, i adjust the airflow quite often. i didn't say it was a stupid idea, just that i didnt care for it... and wondered what they where thinking when they did it like that. you seem to be taking this personally, wth.

i'm not taking it personally- you asked why they did it that way. maybe next time they should ask you before the put out a new product. correct me if i am wrong, but they seem to know what they are doing......

 

[mekc57]

i'm not taking it personally- you asked why they did it that way. maybe next time they should ask you before the put out a new product. correct me if i am wrong, but they seem to know what they are doing......

Not to jump in the middle of this but, I'm sure they are just modifying existing stock to answer demand. I would not be surprised to see them bring out something closer to the R91 when they mill some new stock. If you have 1000 pieces milled you mod them. If your starting from scratch, you can do it right the first time and it's better to have air control than not.

 

[Krizzell]

Not to jump in the middle of this but, I'm sure they are just modifying existing stock to answer demand. I would not be surprised to see them bring out something closer to the R91 when they mill some new stock. If you have 1000 pieces milled you mod them. If your starting from scratch, you can do it right the first time and it's better to have air control than not.

That sounds 100% more like what happened.

 

[peterforpats]

Not to jump in the middle of this but, I'm sure they are just modifying existing stock to answer demand. I would not be surprised to see them bring out something closer to the R91 when they mill some new stock. If you have 1000 pieces milled you mod them. If your starting from scratch, you can do it right the first time and it's better to have air control than not.

"it was done because it is the easiest and fastest way to modify the existing kfl to compete against the r91%. no need to redesign the base when all you have to do is drill a short hole to the airway and add a screw...... "

isn't that what i said?

 

[bustabo]

I'm sure if they did it on the side like the russion everyone would be saying CLONE and COPY.

The base of the KFL+ actually looks a few mm taller than the previous lite.

Sent from my HTC One using Tapatalk