The Womper Woom, Womp it again Sam.

[Lannie]

Aluminum electric fence wire?
The soft stuff.

Oh, we have lots of that, it will work? I thought it might be too big, but I'll see if it will fit.

Thanks I'm a happy vaper right now. Finally enjoying it like it was supposed to be.

I love mine, ever since I put a good o-ring where the broken one was, under the AFC ring. I bottom fill mine now, and aside from wiping a bit of juice off after turning the AFC ring (because it sticks in those holes), mine's been dry as a bone, too. It might be my favorite tank right now.

 

[Boden]

Got the acrylic soaked into the wood. I'm liking this one a lot.

Just for fun (that 510 connector isn't attached to anything)

Now to wait for the acrylic to cure. Then wires!!!

 

[LJFinFLA]

I love mine, ever since I put a good o-ring where the broken one was, under the AFC ring. I bottom fill mine now, and aside from wiping a bit of juice off after turning the AFC ring (because it sticks in those holes), mine's been dry as a bone, too. It might be my favorite tank right now.

It is the best tank that I have. Flavor is great and I love the large tank capacity. I tried for so long to get it to stop seeping it was driving me crazy. I had tried numerous fixes and none of them worked till now.

 

[Eskie]

I just got a Boreas. What a nice tank! Great flavor, and not a drop of leakage, but it's only been this afternoon. I think this edges out the Crius Plus for best big tank. Even compares well to a smaller tanks like my Merlin or Bellus. An excellent addition. It was between the Aromamizer Supreme or this, and I'm happy with my choice.

Why pretend otherwise. I'll probably get the Supreme as well.

 

[LJFinFLA]

I just got a Boreas. What a nice tank! Great flavor, and not a drop of leakage, but it's only been this afternoon. I think this edges out the Crius Plus for best big tank. Even compares well to a smaller tanks like my Merlin or Bellus. An excellent addition. It was between the Aromamizer Supreme or this, and I'm happy with my choice.

Why pretend otherwise. I'll probably get the Supreme as well.

Which color did you get. Mine was a problem with the Black color. It didn't really leak it was more of the liquid seeping through the air holes. Having to constantly clean it off was a real PITA.
Yes it is a great tank for sure.

 

[Eskie]

I got it in stainless. I think it looks great. Here it is on my Efusion.

All dry for me so far. Just open 2 air holes. I did follow that whole leave open a half hole, fill, screw the cap back but flip it for the last turn, then open the air/juice holes and turn right side up again and no problem when doing that. Also have a good amount of cotton extending under the coils to cover the bottom feed juice holes in the deck.

 

[LJFinFLA]

I got it in stainless. I think it looks great. Here it is on my Efusion.
View attachment 599677

All dry for me so far. Just open 2 air holes. I did follow that whole leave open a half hole, fill, screw the cap back but flip it for the last turn, then open the air/juice holes and turn right side up again and no problem when doing that. Also have a good amount of cotton extending under the coils to cover the bottom feed juice holes in the deck.

Yea for some reason the SS ones did not have the problem. It only seemed to be the Black ones.

 

[Eskie]

Yea for some reason the SS ones did not have the problem. It only seemed to be the Black ones.

That's stinks. I wonder why it would happen by color? Something about the finish affecting the fit?

Got the acrylic soaked into the wood. I'm liking this one a lot.
View attachment 599661
View attachment 599663
View attachment 599665
View attachment 599667

Just for fun (that 510 connector isn't attached to anything)
View attachment 599669

Now to wait for the acrylic to cure. Then wires!!!

That is one beautiful mod. You did the metalwork as well? Amazing.

 

[LJFinFLA]

That's stinks. I wonder why it would happen by color? Something about the finish affecting the fit?

Could be. It may have been that it was one of the earlier runs in which the o-rings were junk. IDK but right now I have not had any problems for 10 days and I'm very happy again.

 

[Eskie]

As long as it's now working. I'm impressed with the tank from just the short time I've used it this afternoon.

 

[coolerat]

My 25mm Trolll v2 came today. I have the 22mm one and it's a fantastic unit but 22 stuff looks goofy. Gonna use it on the VT 75 so it's gotta be low power cause 26650 batteries are terrible think 10 wraps of 24.

Was in the city today and the had a green Limitless v2 cheap. So ugly I had to get it. It's kinda harrowing on me. It's so ugly it's cute. Radiators for that one.

 

[MikeyConti]

I got it in stainless. I think it looks great. Here it is on my Efusion.
View attachment 599677

All dry for me so far. Just open 2 air holes. I did follow that whole leave open a half hole, fill, screw the cap back but flip it for the last turn, then open the air/juice holes and turn right side up again and no problem when doing that. Also have a good amount of cotton extending under the coils to cover the bottom feed juice holes in the deck.

I like how the newer ones come with the Knurled/Ridges top cap.. Early models like mine were just smooth. Nice Setup!

 

[LJFinFLA]

As long as it's now working. I'm impressed with the tank from just the short time I've used it this afternoon.

Yea it's a good one. I had a hard time putting down even when I had the problem. Now with the 2 I have working right they will be used very much. Right now the one I'm using has a dual SS316L Clapton w/ 24ga & 36ga. It's .19 ohm build @ 65 watts 470 degrees in TC mod. Nice warm flavorful vape.

 

[Eskie]

Boreas sat upright all night and no leaking or anything to note. Yay!

Next up, deciding on whether a RX200S is worth getting as a beater. The things are only $40 these days, and I'm not expecting amazing performance, although it would be nice if TC would work. My only other Wimec is a Presa 100, and TC with SS is not bad. Smoother than I expected for the price. The new RX2/3 doesn't interest me as one, I'm not concerned about varying the battery count as the whole point is to have a beater with long battery life, and two, I've read about contact issues with the batteries in the different configurations.

I'm still planning on getting some more DNA based mods down the road (that soon to be available Therion 133 is calling), but none of those are the kind I would feel comfortable just leaving in the cup holder of my car while running errands.

 

[Lannie]

Geez, my RX200 is my BEST MOD, and you guys are talking about it as a "beater mod." Mine is a My Precious mod.

 

[Eskie]

Geez, my RX200 is my BEST MOD, and you guys are talking about it as a "beater mod." Mine is a My Precious mod.

Ooh no offense intended (takes foot out of mouth)! I guess I'm concerned about potential issues with the 510 (let's dig the hole deeper), and overall construction (should have just shot myself in the head instead of the foot and end this agony).

So you're happy with yours then?

 

[Boden]

Ooh no offense intended (takes foot out of mouth)! I guess I'm concerned about potential issues with the 510 (let's dig the hole deeper), and overall construction (should have just shot myself in the head instead of the foot and end this agony).

So you're happy with yours then?

Epic backpedal off a cliff

 

[Lannie]

Ooh no offense intended (takes foot out of mouth)! I guess I'm concerned about potential issues with the 510 (let's dig the hole deeper), and overall construction (should have just shot myself in the head instead of the foot and end this agony).

So you're happy with yours then?

Boy, that was almost worthy of Rixy!

Yes, I love mine. I had also heard about problems with the 510, so I'm just careful with it. Now I have one of those heat sinks on it, and it stays on there, so there's no stress on it now at all. I take the tank off the heat sink to fill it and re-wick it, and the heat sink just stays on the mod. I LOVE IT! I have a silicone sleeve on it now (because the damn dog tipped it over one day and it has a scratch on the beautiful red-wine finish), and that makes it even better. Very solid grip now, and if I set it down on the table a little too hard, it's doesn't go clunk. I got a second one, too, because I like this one so much (thanks again, Atcha!), but I'm waiting on batteries for it. They've shipped, so they should be here in a few days. Then I'll have something with teeth that I can put my Limitless on and get the full potential out of THAT tank. It's OK on the mod it's on, with the coils I have in it, but it could be so much BETTER. So I'm really looking forward to getting the other RX200 going.

 

[Boden]

I'm in a mental bind. Do I get a Triade or two DNA75 and a 200 for the same money and make more toys...

Or do both

This may be the most first world problem ever, well that and deciding what pie to have with lunch.

Man, we are some lucky buggers.

 

[Robert Cromwell]

I'm in a mental bind. Do I get a Triade or two DNA75 and a 200 for the same money and make more toys...

Or do both

This may be the most first world problem ever, well that and deciding what pie to have with lunch.

Man, we are some lucky buggers.

DNA 60 instead of 75.