-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
The YiHi SX350 35W Chip at Varitube
- Thread starter Onedesign1
- Start date
- th_trl_thread_readers 0
- Status
Happy BDAY Onedesign1!!!
New problem installing file!!!!
Index=0,Code=1,Comment=Sys_Init().
Index=1,Code=2,Comment=Dfu_IterateDevices().
Index=2,Code=2,Comment=Dfu_IterateDevices().
Index=3,Code=11,Comment=libusb_open() is fail,in Sys_Startup().
Send this file to YiHiEcigar,please.
<End>
Sent you the file in an email.
New problem installing file!!!!
Index=0,Code=1,Comment=Sys_Init().
Index=1,Code=2,Comment=Dfu_IterateDevices().
Index=2,Code=2,Comment=Dfu_IterateDevices().
Index=3,Code=11,Comment=libusb_open() is fail,in Sys_Startup().
Send this file to YiHiEcigar,please.
<End>
Sent you the file in an email.
Last edited:
I tried it too. I will try again. Cross your fingers.
Sent from my iPad using Tapatalk
Not sure what the issue was with it the first two attempts. I redid it all from scratch an it's working. I'm at 50w now. Now to test it out. Thank for gage help.
Sent from my iPad using Tapatalk
Happy Birthday OD!
Here's a picture of my new SX350 (50w upgrade applied) 1590G raw aluminum box mod and a nice new Tugboat from VariTube.com
Gratitude,
Robert aka Mrengles
Here's a picture of my new SX350 (50w upgrade applied) 1590G raw aluminum box mod and a nice new Tugboat from VariTube.com
Gratitude,
Robert aka Mrengles
What build are you doing in the 1590A? The 1590A might be smaller than you think. It's a tight fit for a VTC5 with Keystone battery holder. I mounted the chip sideways. It was my first mod, so it doesn't look TOO pretty. And I've already ripped everything out of the box, and redid everything once already.
Well, I got my chips in from varitube (ty btw and happy birthday) and while messing with it, I noticed the usb charging board. I personally think they should have wired them from the other side so you have a nice flat to mount them. Here's a pic to explain what I'm saying better lol:
Well, I got my chips in from varitube (ty btw and happy birthday) and while messing with it, I noticed the usb charging board. I personally think they should have wired them from the other side so you have a nice flat to mount them. Here's a pic to explain what I'm saying better lol:
I totally agree! What say you onedesign1?
Sent from my iPhone using Tapatalk
well guys I can pass it along and ask for a future change. You know that USB is probably build and on a shelf though so not sure how soon we'll see a change. But I will provide it a suggestion from the group! I agree its a great idea.
What build are you doing in the 1590A? The 1590A might be smaller than you think. It's a tight fit for a VTC5 with Keystone battery holder. I mounted the chip sideways. It was my first mod, so it doesn't look TOO pretty. And I've already ripped everything out of the box, and redid everything once already.
I held one at a store last week and was shocked. The one in the store was 11.00. No way. I need other supplies so got it online for less then 6. I ordered a 3d printer so I can play with the faceplate. This unit will be my work unit so I want it small as possible. Won't be doing much 50w on it so I think your build is awesome. You did good getting it all in that small area. I might just order my second chip and take my time with this but it's all going in that box. I like your build. My first build was in a radio shack project box. lol So I'm not judging but think yours was great for a first build too. We all start some place and learn.
Sent from my iPad using Tapatalk
Yeah the reason for ripping the guts out was to redo my soldering. Used a higher quality solder. My connections weren't good enough for 50w. After I redid the solder, I can Vape my dripper at 50w for an hour or so depending on how much I vape. If I were to start from scratch, I'd have the usb charging board facing down in that picture cause the board is a bit long, I had to trim a slot in the battery holder for it to fit. I'd also move the battery holder down so I can have a spring loaded 510. Had to move the holder up a bit cause the VTC5 is too wide to fit the charging board where it's at, and I had already cut a hole for the usb... Oh well... It works...
At 15 - 20w vaping my kayfun, I can go 2 days on a charge, so it's great if you want something small, and don't vape drippers all day.
Last edited:
Hey all!
Although I've been building SX350 boxes since early May, I just found this thread.
I had a problem with one of my chips, from the initial release (from Yihi) where my chip would not buck properly. Most of the time it would display "SHORT!" Luckily it did not occur with any of mods that I sold. This 50W upgrade fixed it!
The sweetest part? Yihi sent me a free replacement with my last order. So I got a free chip...Yay for me!
Random pics from a few different builds...
Sent from my SC-02E using Tapatalk
Although I've been building SX350 boxes since early May, I just found this thread.
I had a problem with one of my chips, from the initial release (from Yihi) where my chip would not buck properly. Most of the time it would display "SHORT!" Luckily it did not occur with any of mods that I sold. This 50W upgrade fixed it!
The sweetest part? Yihi sent me a free replacement with my last order. So I got a free chip...Yay for me!
Random pics from a few different builds...
Sent from my SC-02E using Tapatalk
Just tested with a .2 ohm coil @50W. Turnigy 6000mAh 65C Li-Po. This is my problem child that wouldn't buck but the update fixed her right up!
Sent from my SC-02E using Tapatalk
Sent from my SC-02E using Tapatalk
- Status
Similar threads
- Locked
