The YiHi SX350 35W Chip at Varitube

[kurtus]

Just a lil update with the early version of the 50 watt upgrade I got. I think this was mentioned by another member already but I am noticing on my unit that if the batteries are taken out of the mod for a little bit it looses all the presets except the one it was on when I pulled the batteries. When I put the batts in it came back on to setting 3 at 42 watts I had set but 1, 2, 4 and 5 where all back to default. Have noticed this the 2 times I had the batteries out of it. Does the official version fix this or is it the same version that I originally got?

 

[DFireOnly]

Ok, just because they upgrade it to 80w does not mean you have to find a bigger battery. I mean really, who here vapes over 20 watts? So my point is, build your mod around your level of vape. I would suggest dual sony vtc 4 or 5 and you will be ok or the purple enfests from Welcome to VariTube.com - A Better Alternative to Smoking


Sent from my iPad using Tapatalk

Why drive 75 mph. 55 mph is safer and you get to the same place. lol

I vape a mech with a 0.2 ohm build every morning and after dinner. Thats around 88 watts. I would love one device to do both. The rest of the time is a kayfun at 10w to 15w. I think people are crazy that do 100w or 200w but someone will do it. lol I pass on that one. A dual sony would do it but we have many ways to do it now.

 

[TruckerMSA]

I agree but I'm just sayin lol


Sent from my iPad using Tapatalk

 

[Onedesign1]

actually I've been vaping 0.2ohm @ 37W for awhile now...

Kurt I will look at my presets....I haven't noticed and using the same as you. I will ask also about it.

 

[jimbill]

I also been vaping over 20 watts and plan to go higher when I get a better rda.I say bring on the 80w so i can try some quad coils

 

[TruckerMSA]

Well, I guess I was wrong lol vape on woohoo!


Sent from my iPad using Tapatalk

 

[DFireOnly]

Well, I guess I was wrong lol vape on woohoo!


Sent from my iPad using Tapatalk

lol


Sent from my iPhone using Tapatalk

 

[TruckerMSA]

Hmmm, I just noticed that you can vape while charging the batteries with this sx360 chip so I guess it has a pass thru feature, cool lol


Sent from my iPad using Tapatalk

 

[Onedesign1]

not pass through.....Pass through uses the charger power. In the case of the sx350 you're using the battery....the charger is still just putting out its 1A

 

[kurtus]

With .5-.7 ohms I'm averaging 33 watts with smaller air holed drippers, I bump up to 42 watts when I use large airflow drippers to maintain the heat I like to get from my vapor. So yes higher wattages are used by many of us.

 

[Portertown]

TruckerMSA,
What size did you drill the round hole for the screen in your latest wood mod? That is a very good looking mod for sure.

 

[TruckerMSA]

TruckerMSA,
What size did you drill the round hole for the screen in your latest wood mod? That is a very good looking mod for sure.

I used a 5/8th forstner bit but it's a lil big, I need to get the next smaller size and I think it will be the right size.


Sent from my iPad using Tapatalk

 

[Kevinn]

There are a few companies on the Internet that will custom mill a Hammond box if you'd rather have a perfect machined square screen cutout

 

[TruckerMSA]

There are a few companies on the Internet that will custom mill a Hammond box if you'd rather have a perfect machined square screen cutout

There's no fun in that lol


Sent from the Truck O Shop

 

[DFireOnly]

I used a 5/8th forstner bit but it's a lil big, I need to get the next smaller size and I think it will be the right size.


Sent from my iPad using Tapatalk

I did a 9/16 hole in a 1590a box. Its about right. Will upload a pics tomorrow. Used a tree drill bit.

 

[Portertown]

I used a 5/8th forstner bit but it's a lil big, I need to get the next smaller size and I think it will be the right size.


Sent from my iPad using Tapatalk

Thanks for the info on the hole size. I think the round hole really looks good and it breaks up some of the "square" look on a box mod.

 

[TruckerMSA]

I did a 9/16 hole in a 1590a box. Its about right. Will upload a pics tomorrow. Used a tree drill bit.

Hmmm. Apparently I don't have that size. I need to get it...


Sent from the Truck O Shop

 

[TruckerMSA]

Thanks for the info on the hole size. I think the round hole really looks good and it breaks up some of the "square" look on a box mod.

Try a 9/16th dril bit. I havnt tested this size but Dfire says it works.


Sent from the Truck O Shop

 

[Portertown]

I did a 9/16 hole in a 1590a box. Its about right. Will upload a pics tomorrow. Used a tree drill bit.

Thanks for the reply and looking forward to seeing your pics.

 

[TruckerMSA]

I would try it on a piece of scrap wood before you drill the final hole


Sent from the Truck O Shop