The YiHi SX350 35W Chip at Varitube

[Onedesign1]

no luck on the file ehh

the new file will be released soon...hopefully they'll post it up tonight

 

[rhelton]

Sounds good

 

[Onedesign1]

Here's links to the files. There are 2 of them. They are both V2.6. One is Oldboot and the other is newboot. Depending on your loader one of them will work. You'll know immediately when you try to open it with the loader it'll say not compatible so try the other. Try Oldboot 1st is my suggestion

https://drive.google.com/file/d/0B61oDGxskBGhX0ZaZ3JvbHBacGs/view?usp=sharing <---Oldboot

https://drive.google.com/file/d/0B61oDGxskBGhMDBSUmxoQm91QjQ/view?usp=sharing <----Newboot

Have fun!

Note....we also confirmed there is no drain if vaped down to cut-off and left uncharged. This was bug reported in several forums with LiPo's....vape to cut-off and left without charging would drain and ruin battery. We left them for a couple days now and see no drain.

 

[DrBeaker]

I upgraded using the oldboot file.
I love the extra decimal point on the resistance read-out.
note... if you complete your upgrade and flip your unit upside down and when the screen does the flip and it looks like its in a mirror. Other words the numbers are backwards.
All you need to do is reboot the device.
I did a system off restart then link on... restart.
that did the trick.

 

[Onedesign1]

I upgraded using the oldboot file.
I love the extra decimal point on the resistance read-out.
note... if you complete your upgrade and flip your unit upside down and when the screen does the flip and it looks like its in a mirror. Other words the numbers are backwards.
All you need to do is reboot the device.
I did a system off restart then link on... restart.
that did the trick.

Thanks Doc and its a good point to remember since we haven;t had an upgrade in a while......Always need to reboot via either a battery pull or Link command after the upgrade. Remember: take the upgrade. When complete unplug USB and then hold down fire button until you see version scroll through. Click 5 times and let it boot up. Last either pull battery or go back into menu and use Link command. This completes the upgrade process.

 

[bonmatos]

V2.6 version .... ok

 

[rhelton]

Nice, that 2 decimal point was needed. It will fire at 9.5v with a 1.47 ohm coil , not really vapeable but it will do it lol

My up/downs were not working at first I had to go in and use the link option and its all good now. Really nice board, just my opinion but it is a much better option than a dna, I am really impressed.

Thanks guys

 

[DrBeaker]

Oh yeah when it doing the mirror flip screen thing after upgrade the updown buttons dont function either. You must reboot! Then it will function properly...

Nice, that 2 decimal point was needed. It will fire at 9.5v with a 1.47 ohm coil , not really vapeable but it will do it lol

My up/downs were not working at first I had to go in and use the link option and its all good now. Really nice board, just my opinion but it is a much better option than a dna, I am really impressed.

Thanks guys

 

[rhelton]

Maybe thats what it was.

 

[novamatt]

Awesome. I got on the waiting list yesterday.

And you're quite welcome. Really great vendors are not nearly as common as they should be. It's good to recognize one when you find it.

Saw you got the mod in today and just ordered it. Based on past purchases, I'm guessing I'll have it here in VA before the weekend hits. Thanks!

 

[Onedesign1]

Saw you got the mod in today and just ordered it. Based on past purchases, I'm guessing I'll have it here in VA before the weekend hits. Thanks!

Happens to be on its way to USPS now!

By the way i'm super impressed...its dinky, hefty, and pretty well thought out. Adjustable and spring loaded center pin...hint...push down on the atty when tightening once it engages the pin...its stiff.... Now all we need to do is design an adapter to take a 2nd battery......come on modders!

 

[Onedesign1]

So as to not use this thread I created a new one for the SXmini mod here if we want to have discussion about it http://www.e-cigarette-forum.com/forum/showthread.php?t=631978

But either or is fine for now

Here's a pic to show off its size next to an iStick

 

[rhelton]

Thats nice gonna have to put one on the wish list.

 

[bonmatos]

a new version for the V2.6
The link is on the youtube page or here : https://www.dropbox.com/s/3jsvzwh2a99w68t/SX350_Logo_Changer_Release.zip

 

[rhelton]

How do you change the logo?

 

[DrBeaker]

According to the readme this does not work for the 50w or 60w file? Only 35W? Has anyone figured out how to crack the CRC check sum?
is the v2.6 60w? Can we safely change the logo on it?

a new version for the V2.6
The link is on the youtube page or here : https://www.dropbox.com/s/3jsvzwh2a99w68t/SX350_Logo_Changer_Release.zip

 

[bonmatos]

you can change just sx350 and texte of menu Yh is blocked
data V2.6 is the last 60W for this software update

Watch the video, it is not complicated

 

[bonmatos]

 

[DrBeaker]

This logo changer worked great for me. Little photoshop and created a new logo imported it saved and upgraded no problem. Thank you so much.
I am thrilled...

 

[Onedesign1]

For those interested we'll be offering these in the next couple of days complete with our connector installed