Thoughts On New Saber Touch Versions...

[Sir_Lawrence]

i think the new caps look great maybee a little knurling so you can screw it off /on and polished and your good


lawnman3

Thank you for your suggestions... I appreciate and take into account every one I get.

Some want it totally smooth, others with knurling... Some want it polished brass or nickel, some like the brushed look. LOL

It's impossible to keep every style in stock. And if I did every cap to order, it would take weeks for someone to get their order. Right now, I'm trying to get feed back and ideas. And thank you for yours. I want to make sure that I can make "Most" people happy with the look they are getting.

Oh, and since it only takes 3-4 turns to twist it shut, there is no problems at all with unscrewing it. Knurling would only be decorative. Remember, Brass against Aluminum doesn't cause any corrosion... like some mods that have Aluminum against Aluminum. Also, brass is a much better conductor.

 

[Sir_Lawrence]

This new style of
Turned End Caps
Do look awesome polished!

Not a very good pic though!​

 

[Sir_Lawrence]

Here is the first glimpse of the Saber Touch Adjustable Model.

It will be the First Fully Adjustable mod with a Touch Sensor Switch!

The indent near the top is where you will adjust the voltage.
It will put out as much voltage as what your batteries can put out!
Or as little as you want.
I wanted to keep the same design feel as the vent holes that are on the bottom of both sides.
But I also wanted the Adjustment to blend in instead of taking away from the looks.

It is far away from production, since you all know me, I want it to last even if a truck drives over it!
I would love your opinions on it!

 

[Bradyo]

I think that is sweet,need any testers LoL,I can't wait to buy one and finally have a VV.

 

[Sir_Lawrence]

I think that is sweet,need any testers LoL,I can't wait to buy one and finally have a VV.

I think you are right... I won't get ANY sleep when these come out! I'm glad you like it!

 

[jtrygg]

I second the testers statement haha great addition Sir, I like that you took the mod's looks into consideration. :drooling: haha

 

[Sir_Lawrence]

I second the testers statement haha great addition Sir, I like that you took the mod's looks into consideration. :drooling: haha

Thank you for the "drooling"! LOL It won't be in production for a while. I want to make sure it lasts a lifetime like the Sensor Switch will.

 

[Bradyo]

I THINK you hit a home-run on this mod,so when you say long time what can we expect after the new year.I know you can't rush if you want it pefect so I will sit tight and wait...PS NO ONE CAN SAY YOU COPIED THERE MOD'S BCUZ if you were copying they would have been out already.I Really can respect SIR because alot of these so called mod makers rush them into production and you buy there headaches,and oopps should woulda coulda they come out with the new and improved P.O.S JUST AFTER YOU SPENT YOUR HARD EARNED DOLLARS on there so called this is it never have to buy another MOD MOD lol NO THANKS I AM PUTTING MY MONEY WITH SIR LAWRENCE

 

[bsoplinger]

I have a complaint with what you've shown which is the same as I have with the Buzz. Otherwise I would have bought a Buzz already. Of course now that there will soon be your variable ST I'd much rather have that if only…

It didn't require a separate tool to adjust the voltage! The Buzz has the screw hole for a screwdriver. Looks like you've decided on an Alan (or hex) wrench. I can see the desire to give the mod clean lines but I much rather would have a knob or something. I figure it'd be a case of experimenting for each flavor to find the voltage for that flavor. And I just can't see messing around with a tool in addition the the PV is just not to my liking.

Otherwise I must say I feel your design looks way nicer than the Buzz's look.

 

[jtrygg]

Maybe you could make a clip on style button that slides into that hole... That way if someone wants a tactile button they would be happy and the clean lines would still be preserved for everyone else.

 

[Sir_Lawrence]

There are really only a few types of adjustments available on the market that are worth even trying to use. I chose this type because I know it will hold up longer, it is made of Brass, not plastic that can break, and it gives you more turns than most. More turns means that you can be more accurate with your settings. I looked at just about everything on the market, and it just wouldn't hold up to a five year warranty. That's why most companies only give a warranty for a few months. I think if you are going to spend good money for something, it should last.

 

[Sir_Lawrence]

Here are some with the Turned Brass and Turned Nickel Plated Caps.

This one has Turned Brass Caps

This on has Turned Nickel Caps

I hope you like them!
​

 

[Sir_Lawrence]

Update on the Saber Touch VariVolt....

We are still in the hands of the people prototyping the new Saber Touch VariVolt. We are still basing Everything on their opinions, since they are very experienced Vapers! So far, from what I hear, things are working great! I'm going to send them another model of the VV to see if that even Beats their expectations of the first they were testing. I've been working night and day trying to find the best mod for everyone. You all know me! I only want the best for the people that have the Saber Touch in their hands!

So far, everything is going well... just want to make it better than anything on the market! Safer, better, easier to "Touch", anything to stay off of analogs!

If you all have any questions at all about the Saber Touch VariVolt, Please email me at:

SirLawrence@VaporMoon.com

 

[bsoplinger]

I know you're working on the variable voltage model but…

Any luck on finding a 901/808 thread connector you'd be willing to use? I really would prefer my ST to be 808/901 native vs. always having to use adapters as I really don't like the 510 atomizer (nor the 306).

 

[Sir_Lawrence]

I'm looking at some companies that may be able to supply those for me.

 

[bssage]

Any update on the VV??

If you need a beta tester, Well I'm just sayin,,,,, Umm ,,,,,

I might not be chattin much But I've been watching you brother.

 

[Sir_Lawrence]

Any update on the VV??

If you need a beta tester, Well I'm just sayin,,,,, Umm ,,,,,

I might not be chattin much But I've been watching you brother.

Hey... you should keep up with the threads! They are going to be out on or before Nov 6th! If you want, I can make you one now. Just email me at SirLawrence@VaporMoon.com and let me know what options you would like!

 

[bssage]

Hey... you should keep up with the threads! They are going to be out on or before Nov 6th! If you want, I can make you one now. Just email me at SirLawrence@VaporMoon.com and let me know what options you would like!

Son of a gun I guess I should. I think I would be abusing my responsibilities as a dad to get any more mod's,,,,, untill after Christmas.

Is there a vid of the VV model lurking around?? Pic's??

 

[Sir_Lawrence]

Son of a gun I guess I should. I think I would be abusing my responsibilities as a dad to get any more mod's,,,,, untill after Christmas.

Is there a vid of the VV model lurking around?? Pic's??

Go to video reviews or onto my YouTube page and you'll see a couple of reviews so far! If you go to my site, click on the YouTube rotating block and it will take you right to my page.

 

[bssage]

nice both good vids. I must have missed the price point though.