RDA Tobeco Velocity RDA v Mini

[muzichead]

On the velocity's, the center pin that holds the positive post, (block), in place is drilled out to feed and drain through. It is the exact same set up as the Manta and the Stumpy, except the positive block is not flush with the bottom of the rda so it will not drain completely....

ETA...

 

[phephner]

So your mini came with a squonk hole drilled into the deck or posi post of the atty but with a solid 510 pin?

Mine arrived with the parts shown in this pic. Since I'm not a squonker, this is all I can tell/show you. There are no extraneous holes drilled anywhere.

 

[muzichead]

Mine arrived with the parts shown in this pic. Since I'm not a squonker, this is all I can tell/show you. There are no extraneous holes drilled anywhere.

In your pic there is another center pin in front of the atty next to the allen wrench. That is the bottom feed pin for this atty and no other holes are needed to transform the atty to bottom feed. The pin itself is hollow to allow liquid to flow through it...

 

[WharfRat1976]

Thank you. The deck is drilled. Thanks for the pic. None of the sellers show the drilled deck.

 

[WharfRat1976]

On the velocity's, the center pin that holds the positive post, (block), in place is drilled out to feed and drain through. It is the exact same set up as the Manta and the Stumpy, except the positive block is not flush with the bottom of the RDA so it will not drain completely....

ETA...

Very good. No Manta or Stumpys come drilled. The drilling of the squonk hole in the deck is aftermarket.

 

[muzichead]

Thank you. The deck is drilled. Thanks for the pic. None of the sellers show the drilled deck.

No... the deck is not drilled. The pin is...