Todays GGTS/AVS Experiment Findings WOW

[mwa102464]

Pretty unbelievable Guyz

I just did an experiment and want someone else to try what I did to see what they think and whether I'm crazy or this is an awesome trick and vape OK.???


Check this out Guyz...!!!!

I just screwed an HV801 Atty to the bottom of the overflow tank and filled the overflow tank up with liquid. Then I attached the top tank WITHOUT attaching the Oring that goes over the Atty-screwed on the top tank, this way the liquid automatically flows to the lower tank as it drops in level.

since there are holes in the lower tanks connector around the bottom of it this liquid seems to be going right into my 801Atty bottom feeding it, thus giving me two full tanks to vape being the regular tank and the bottom overflow tank. and the HV801 Atty seems to be running like a raped Ape and so does an LR801 Atty Plumes of vapor, great 801 taste and just an awesome extra we all didn't know about.!!! Someone else give this a try please and tell me if what I just found is one awesome trick and vape or I'm crazy, well I already know the later of the two !!!!!

PS,

Which is now also telling me to connect an adapter down there and screw on a 510 Atty and a 510 will work on the bottom connector and give us a double tank of liquid to vape, if the 510 doesn't come up high enough use an extension sleeve then a tip OMG off to the next experiment Guyz Thanks
MWA

 

[mwa102464]

The Atty connector and O ring are now not needed for the 801, Imeo this is the way to make the 510 work as well buddy.!!!

 

[mwa102464]

Guyz this is working excellent, cmon someone give me there feed back on this and do this.!!! The 510 should kick .... with this set up..!!!!

 

[Stormynights]

Guyz this is working excellent, cmon someone give me there feed back on this and do this.!!! The 510 should kick .... with this set up..!!!!

I tried to do this and I went wrong somewhere. I got a tank of juice in my lap.

 

[Zaiden]

I'm lost on this setup as well. Can you put up some pictures to explain this in more detail? I would love to try this out tonight.

The thought of a 510 with 2 tanks....YUM.

 

[mwa102464]

Screw on Atty to bottom tank, not the Atty connector the bottom of the tank where the Atty connector screws into is where you scre in the Atty, Attach to GGTS, NO O RING ON ATTY, ! SCREW ON TOP TANK, FILL TOP TANK, YOU COULD FILL BOTTOM TANK BUT JUICE WILL JUST FLOW THROUGH WHEN FILLING THE TOP TANK, ONCE FULL SCREW ON THE TOP CAP OF TOP TANK, FIT O RING ON TOP TANK ALL THE WAY IN AROUNF THE ATTY PUSH DOWN FIRMLY THEN SCREW ON THE VERY TOP PIECE WITH MOUTH PIECE. OPEN CR A BIT GET ATTY GOING, IT HELPS BIGTIME TO HOLD GGTSAVE UP HIGHER ON THE BUTTON END TO BEGING VAPING SO BUTTON END UP HIGHTER WHEN VAPING, YOU GUYZ SHOULD BE ABLE TO DO THIS IT'S VERY SIMPLE.!!! LET ME KNOW GET BACK TO ME ON THIS

 

[mwa102464]

Also keep the CR closed when filling of course.!!

 

[imeothanasis]

Also keep the CR closed when filling of course.!!

If you fill the collector tank with liquid then it will come out from the 4 holes all of it buddy

 

[booker]

Guyz this is working excellent, cmon someone give me there feed back on this and do this.!!! The 510 should kick .... with this set up..!!!!

No worries will check it out today evening

Nice try btw

 

[mwa102464]

Nothing comes out of this Imeo there seems to be just enugh liquid falling to the bottom tank when ou fill the AVS that the 801Atty works like a gem and I only open the CR a very little bit, I have been using an 801 all night and all day so far with no problems at all and no leaking issues, its the way to go for the 801 for sure in my honest opinion I can also fit your topcap and mouthpiece on and the unit is complete with a pefect draw, I would like some others to try this, I know they will like it if they enjoy the 801 the way I like em, !!

 

[booker]

Gimme few hours will ya!

 

[mwa102464]

Sure Booker no problem, your gonna like this

 

[harpo]

I need to cut my nic down. I'm high as a kite right now with this setup.

 

[booker]

Sure Booker no problem, your gonna like this

It's not working for me bro. Once I'll open CR it leaks from the holes and atty is gets flooded.

 

[harpo]

Mine is still working like a champ.

 

[booker]

Well mine works with China's HG 901-801 adapter, the o-ring from 510 cap and a driptip as mouthpiece but can't get it to work with MWA's method. Perhaps I misunderstood something.

 

[booker]

Sry! I used 801 lid o-ring by a mistake for this test. Trying again

 

[harpo]

Here's what I did. I removed the 901 atomizer connector and oring from the AVS. Attached an hv801 to the connector in collector tank. Attached the AVS to the collector tank. Closed the control ring and filled the tank up to the threads. Attached the large cap to the AVS. Put the top cap oring around the 801 and use something to push it in as far as you can without damaging it. Now put the smaller cap on and finally the mouthpiece.

Vape away by keeping the button end of the GGTS at or slightly above the mouthpiece.

 

[imeothanasis]

Vape away by keeping the button end of the GGTS at or slightly above the mouthpiece.

I didnt understand this Harpo, can you explain better?

 

[harpo]

I didnt understand this Harpo, can you explain better?

Keep the GGTS horizontal. It seems the bridge wicks better this way. It works in any position but IMO better in a horizontal position.