Tootle Puffers, Part Three! (The Sequel of the Redux)

[lil_buddy]

how cute is this?
Electronic Cigarette Original SMY Marguerite Vaporizer Pen E Hookah Kalem Nargile E Smoke Starter Kit Vapes Pen X9017-in Electronic Cigarette Kits from Consumer Electronics on Aliexpress.com | Alibaba Group

I think maybe it has a kanger pt coil

 

[RainSong]

For you that use the Melo tank: I'm wondering what settings you use?


Sent from my iPhone using Tapatalk

Have one, don't love it. I was using .5 coils around 35w. That was before I switched to rtas and "subwatting"

 

[ChelsB]

Seems odd it'd just jump wattage, never had that happen.

I thought it was weird too which is why I asked for advice


Sent from my iPhone using Tapatalk

 

[corn flakes]

I've read the nr-r-nr coils save the rubber insulators. Are there any other differences between those and regular coils. I dry burn the CLR coils and haven't noticed any damage to insulators, but that doesn't mean it can't happen. Just wondering if there is anything I should be aware of with the nr-r-nr.

I use them so I don't burn the insulator in the pt coils.

 

[cats5365]

I'm getting virtually no vapor from my melo 2


Sent from my iPhone using Tapatalk

I don't have the Melo 2, just the mini that came with Pico. If I have tanks that aren't making vapor, I try a few things to see if I can isolate the problem.

If you aren't getting vapor, have you tried hitting the fire button and listening for the sizzle?
Can you turn off the air and take some hard draws to pull more liquid in the coil/wick?
Have you tried bumping up the power?
Have you tried swapping it to a different mod to see if the problem is the atty or coil?
If the mod registers the existence of a coil, but you get nothing, I would switch out the coil for a new one. If it does show ohms, are they about what you know it should be?
If the old coil is still fairly new, I give it a vodka bath and try it again on another day.

 

[brewbear]

I thought it was weird too which is why I asked for advice


Sent from my iPhone using Tapatalk

What resistance is your coil? If you can see voltage, set it at about 3.6 volts . You can bump it up slowly from there.

 

[ChelsB]

What resistance is your coil? If you can see voltage, set it at about 3.6 volts . You can bump it up slowly from there.

It's no longer my device. I'll check when I get home. Sorry, I didn't realize that information was needed!


Sent from my iPhone using Tapatalk

 

[Katdarling]

Do you buy them for your CLRs? I was thinking about getting some but can't figure out which. Does this one seem right? The ohms are right for me.

$1.99 Free Shipping Pre-Coiled Wires for Rebuildable Atomizers (50-Pack) (0.3mm Dia., 1.5ohm, 30*30mm: 50-Pack) at m.FastTech.com

We actually got the slightly higher ohmed ones. These:


$4.56 Kanthal A1 Pre-Coiled Resistance Wire for Rebuildable Atomizers (100-Pack) - 30 AWG / 0.25mm dia. / 1.5ohm at FastTech - Worldwide Free Shipping

But I like the ones you posted, Lowjumper. I've added them to the never-ending wish list.

I think they will be to wide, I use these=https://img.fasttechcdn.com/221/2210204/2210204-1.jpg
they fit great, use the drop down menu to find the ohm you want, that look like these

how cute is this?
Electronic Cigarette Original SMY Marguerite Vaporizer Pen E Hookah Kalem Nargile E Smoke Starter Kit Vapes Pen X9017-in Electronic Cigarette Kits from Consumer Electronics on Aliexpress.com | Alibaba Group

I think maybe it has a kanger pt coil

VERY cute!

 

[lil_buddy]

It's no longer my device. I'll check when I get home. Sorry, I didn't realize that information was needed!


Sent from my iPhone using Tapatalk

I have nothing useful to say about your device and this phenomenon, but you should determine if the phenomenon is reproducible - can you make it happen again and if you can, how?

It's possible your husband was inadvertently holding a button or a button got stuck in an unusual fashion or the device is really defective.

 

[Bea-FL]

I think they will be to wide, I use these=https://img.fasttechcdn.com/221/2210204/2210204-1.jpg
they fit great, use the drop down menu to find the ohm you want, that look like these

Link to product:
$3.26 Pre-Coiled Wires for Rebuildable Atomizers (100-Pack) - 29 AWG / 0.3mm dia. / 1.1ohm / 12*12mm leads / 5 loops at FastTech - Worldwide Free Shipping

Thank you both.

how cute is this?
Electronic Cigarette Original SMY Marguerite Vaporizer Pen E Hookah Kalem Nargile E Smoke Starter Kit Vapes Pen X9017-in Electronic Cigarette Kits from Consumer Electronics on Aliexpress.com | Alibaba Group

I think maybe it has a kanger pt coil

Darling

We actually got the slightly higher ohmed ones. These:


$4.56 Kanthal A1 Pre-Coiled Resistance Wire for Rebuildable Atomizers (100-Pack) - 30 AWG / 0.25mm dia. / 1.5ohm at FastTech - Worldwide Free Shipping

Actually 1.5 ohms is what I like best. Thank you.

 

[ChelsB]

I have nothing useful to say about your device and this phenomenon, but you should determine if the phenomenon is reproducible - can you make it happen again and if you can, how?

It's possible your husband was inadvertently holding a button or a button got stuck in an unusual fashion or the device is really defective.

Good idea, I'll try tonight!


Sent from my iPhone using Tapatalk

 

[lil_buddy]

What resistance is your coil? If you can see voltage, set it at about 3.6 volts . You can bump it up slowly from there.

This is interesting idea. If the mod locks in a resistance and does not do real time monitoring of coil resistance, a faulty coil could make such a device read changing wattage.

 

[Uncle]

how cute is this?
Electronic Cigarette Original SMY Marguerite Vaporizer Pen E Hookah Kalem Nargile E Smoke Starter Kit Vapes Pen X9017-in Electronic Cigarette Kits from Consumer Electronics on Aliexpress.com | Alibaba Group

I think maybe it has a kanger pt coil

FYI: Just in case Ya' didn't notice in their ad there . . .

"Sorry, this item is no longer available!'
​

 

[lil_buddy]

FYI: Just in case Ya' didn't notice in their ad there . . .

"Sorry, this item is no longer available!'
​

I did notice lol

They have the red one on gearbest, but the blue one is where it's at
Also, where the heck is the airflow?

 

[Burnie]

I've read the nr-r-nr coils save the rubber insulators. Are there any other differences between those and regular coils.

Yes it does save the insulators if you use them in a device with insulators. I have found also since I switched to using them, you always get your set ohms, every time, no matter the leg length, or how you install it. I like the consistency the most about them, and I have had good luck with FT getting the ohms correct. Every now and then I get one the weld will break while installing, but at less than 4 cents each, its no big deal.

 

[52anddone]

The G2 is the ergonomic antithesis! But it is the best one in my rotation....and though I don't own a fraction of the Shawn's Vape Emporium, I do own several mods.

Yeah brewbear, I don't have ¼ of the mods that Shawn has, but my collection will be getting greater now that I have about all the Atomizers that I will need for the foreseeable future (just need a couple more). I have 3 HΩ Slice's and 1 G2 with another on the way, as those are the only mods that I TC with (Kanthal/NiCr builds). I waited to get into the TC game until something came along that did Kanthal and/or NiCr as that is the only wire that I have (and I have a lot of it) and didn't want to get yet another wire just to TC, so I waited, and then Hohmtech came thru for me and I now TC my wire choice, 28g NiCr and 30g twisted Kanthal at about 10w to 10.5w (the minimum wattage that those mods will go down to) and am as happy as can be, and consider both Hohmtech mods the best that I have, hands down, but the G2 is a brick for sure.

 

[Shawn Hoefer]

Does anyone have any idea of what could've happened?


Sent from my iPhone using Tapatalk

Is it a repeatable issue? If so, the board likely shifted in the housing. Using a USB cable GENTLY try the shift the board around...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Sir Kadly]

Thoughts, Hoef?

Amazon.com : Xtar DRAGON VP4 PLUS Charger with charger pouch probes adapter car charger with Xpower Battery Case : Camera & Photo

Looks to be VERY comprehensive, and likely more than most would ever use. And, $85? Ouch...

Gonna get one!

Not that I need it right now, but I'd been eyeing that one myself. It is available slightly cheaper from China by the way, but not by a huge amount.

 

[Sir Kadly]

For you that use the Melo tank: I'm wondering what settings you use?


Sent from my iPhone using Tapatalk

Depends on the coil. I have a Melo 3 currently running at 35w, I don't remember which coil is in it. Mod says .4ohms but I don't recall if it is a Melo coil, or one of the other various compatible coils I own to be honest. I know, before anyone says anything, I really need to get more organized and detail oriented about that type of thing. Guess I need to start using a spreadsheet, right @Katdarling ?

 

[ChelsB]

Depends on the coil. I have a Melo 3 currently running at 35w, I don't remember which coil is in it. Mod says .4ohms but I don't recall if it is a Melo coil, or one of the other various compatible coils I own to be honest. I know, before anyone says anything, I really need to get more organized and detail oriented about that type of thing. Guess I need to start using a spreadsheet, right @Katdarling ?

Oooh, compatible coils. Thanks! please tell me which ones!


Sent from my iPhone using Tapatalk