Tootle Puffers, Part Three! (The Sequel of the Redux)

[RainSong]

$10? Ooh, might have to give that one a try!

$15ish after shipping, still a good deal in my book.

 

[jaytex1969]

Happy Birthday, Uncle!



Anyone who makes it all the way through that video needs to go right now and get a life...


Jay

 

[Krisma]

Thanks... triton mini coils added to the list!

Noooooooooo. One thing at a time.

 

[52anddone]

Ladi,

I should tell you too that even though most of my juice is 70% pg, I have 70% vg juices too that I've vaped in the Siren, Kabuki, Vika Fantasy and Ego One. All of the tanks I've mentioned, I've been able to vape satisfactorily with a wide range of watts and pg/vg ratios. The Sirens have worked very well at different watts, different pg/vg ratios and ohms as well, but I doubt I've ever used any tank below 8 or 10 watts.

10/4 on the Sirens. Damm good RTA in my opinion !!

 

[Krisma]

I don't know if anyone is interested but I have been making panels for Hcigar VT Inboxes and I was asked to make a video of how I do it. Here is the youtube video on my channel. Its a bit long with all the mixing and pouring (sorry)

 

[RainSong]

I don't know if anyone is interested but I have been making panels for Hcigar VT Inboxes and I was asked to make a video of how I do it. Here is the youtube video on my channel. Its a bit long with all the mixing and pouring (sorry)

AWESOME!

 

[Krisma]

AWESOME!

Thks This is also the same process I go through to make my new Billet Box Panels

A quick pick of some finished ones that are going to a new home

 

[Plettschner]

Managed to get one of these cheaparse Nectars together without anything falling apart. Not bad at all. Good flavor. Holds more juice than I expected in its tiny tank. Put in a 1 ohm 28ga nickel coil and wicked it with cotton bacon. The tapered slot on the body works well for dialing the draw way down. I also laid it on its side and no juice came out. I'll call it a win.

Sent from my iPhone using Tapatalk

 

[pufZeppelin]

ok lots of good stuff here. I am not going to quote every one, but i will update.
I think i will have to stick to 12 mg nic. anything i've ever tried higher puts a lump in the back of my throat.
Most of my juices are wta. but they are all 80 vg.
Now do tanks do better with 50/50 or will 70 vg be fine?
I have lots of expensive mods already. I also just got a new one, i have 4 provari's, 1 p3, and a new sx mini Q class, along with some others a macro, a vapor stout, and a tesla nano.
the Q class I have my uwell crown on, that set up is perfect together for sub ohming.
I decided to concentrate on using my Provari P3 with my P3 Kabuki.
i've got a 80 vg wta juice with a 2 ohm coil. vaping 11.6 watts, aka 4.8 volts.
I usually wouldn't go above 4 volts.
atleast I am getting the wta mouth feel. even though flavor is extra light. regardless i think it tastes better than a cigarette.. and i'm not gagging so that's good right.
my poor sirens... i think i have been trying them at too low of wattage as well. I had a .95 coil at 10 watts. I just bumped it up to 14... and what a big difference. i think i'm gonna have to try a new coil and build one closer to 1.8 or 2 ohms. that was my goal when i built these two and it didn't work out for me lol. shoot for two and get one... awesome.
i definately think the gagging cough was from not having the wattage/voltage up enough. must not have really been cooking the juice.
oh and only sub ohm chasers in this town... only one decent vape shop. it's lonely in coastal georgia.

what I picked-out from this is MAYBE (maybe) you're allergic to VG

have you TRIED to vape HIGH PG for a consistant period of time
maybe try and SWAP your RATIOS for say one eJuice Flavor (80% PG instead of 80% VG) and see if there is a diff result

jus somethin I was thinkin'

 

[corn flakes]

I don't know if anyone is interested but I have been making panels for Hcigar VT Inboxes and I was asked to make a video of how I do it. Here is the youtube video on my channel. Its a bit long with all the mixing and pouring (sorry)

Very interesting. I don't have the patience to do that.

 

[52anddone]

what I picked-out from this is MAYBE (maybe) you're allergic to VG

have you TRIED to vape HIGH PG for a consistant period of time
maybe try and SWAP your RATIOS for say one eJuice Flavor (80% PG instead of 80% VG) and see if there is a diff result

jus somethin I was thinkin'

I've been following this conversation and think that puf has an excellent Idea and interesting observation, one worth considering Ladie.

 

[Katdarling]

Krisma....... phenomenal work. wub wub wub!!!!!!!!

 

[Krisma]

Krisma....... phenomenal work. wub wub wub!!!!!!!!

I almost kept the purple sheet for a BB cover set. sad when you fall in love with the ones you make for others

 

[Sir Kadly]

Happy Birthday, Uncle!



Anyone who makes it all the way through that video needs to go right now and get a life...


Jay

Not only did I make it all the way through, but I enjoyed it so much that I am planning to sing it to everyone in my family on their birthdays. What does that say about me?

 

[tazzle]

I don't know if anyone is interested but I have been making panels for Hcigar VT Inboxes and I was asked to make a video of how I do it. Here is the youtube video on my channel. Its a bit long with all the mixing and pouring (sorry)

Absolutely fabulous; thank you so much for sharing the vid. It was fascinating.

 

[Bea-FL]

oh darn, that juice is only 3 mg.

If you have nic you can just add enough to make it whatever strength you need.

I don't know if anyone is interested but I have been making panels for Hcigar VT Inboxes and I was asked to make a video of how I do it. Here is the youtube video on my channel. Its a bit long with all the mixing and pouring (sorry)

So glad you shared this with us. I've admired your work and it was really cool to see how you do it.

Thks This is also the same process I go through to make my new Billet Box Panels

A quick pick of some finished ones that are going to a new home


View attachment 654399 View attachment 654395

beautiful!

 

[DingerCPA]

I don't know if anyone is interested but I have been making panels for Hcigar VT Inboxes and I was asked to make a video of how I do it. Here is the youtube video on my channel. Its a bit long with all the mixing and pouring (sorry)

Wow. Beautiful!

(and that is EXACTLY how I expected your voice to sound )

 

[leftyandsparky]

I don't know if anyone is interested but I have been making panels for Hcigar VT Inboxes and I was asked to make a video of how I do it. Here is the youtube video on my channel. Its a bit long with all the mixing and pouring (sorry)

I watched a lot of your videos.... I'm in love!
I'm also doing a flip bowl painting today! Love the panels, beautiful work and thank you for sharing.

 

[Krisma]

Wow. Beautiful!

(and that is EXACTLY how I expected your voice to sound )

Haha I have been told i sound school marmish

I watched a lot of your videos.... I'm in love!
I'm also doing a flip bowl painting today! Love the panels, beautiful work and thank you for sharing.

Aw thanks. Should i mention the first bowl flip I did and the 2 hours cleaning me and my kitchen when i slipped. LOL

 

[Maytwin]

Thks This is also the same process I go through to make my new Billet Box Panels

A quick pick of some finished ones that are going to a new home

Absolutely stunning as always