Tootle Puffers, Part Three! (The Sequel of the Redux)

[RainSong]

You lot are making it hard not to buy a jac

You may find it too small if you like a bigger mod. If you hold off you'll be able to see one in person before you pull the trigger. Or just buy one and if you don't like it I might know *someone* who'd be happy buy it from you

It seems to me that many mods are being made unnecessarily thick to accommodate bigger tanks. Add in squared off edges and a good hand feel is off the table. I'm anticipating my single battery VTC Minis coming in will not feel as comfortable as my dual battery rounded mods. Pretty much anything that can handle a 25mm atty is too big for me.

Yep, me too. 22mm and smaller tanks serve me just fine.

 

[juskiddin]

JK!!!!!!!!!!!!!!!!!!


You will NOT believe it, but it was not 7 minutes ago that I thought of you and remarked that I hadn't see you!!!!!!!

WHATTA !

Welcome back sweetie!

Whoa...that's very Kreskin-like. Kinda freaky! Good to see yooz, Kat!

 

[juskiddin]

Yes, the wrong density with rayon can be... problematic



Welcome back!

Tipping my hat to you, Mr. O

 

[juskiddin]

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!



My Sister of a different Mister!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Good to see ya, Darlin'!!!!!!!!! Hope you're keeping well.....

Wuv you too, mah Dings!

 

[juskiddin]

...and she's NOT "Jus' Kiddin'", @juskiddin !!!! Pretty wild, and HI!



Welp, yeppers.

Yo DP!!!

 

[juskiddin]

Welcome back! Long time no see.


Thanks Petro. This is excellent information. Everyone should read this if using CCs. I'm glad I use cash for almost everything.

Edit: Never mind the FB part.

Hi Bea!

 

[juskiddin]

Yeah JK is in the house.

Yezz Miss Krisma, and pulling off the banana dance (without peeling).

 

[DPLongo22]

Ok, I looked at the post again…I see it now . When I first read it I was trying to skim through 46 posts (don't tell @Katdarling…I don't want demerits )

No, no, Bea. You're fine. Some/many pages back, she announced that sold off all the demerits in the classies.

I'd tried to snag a few but she wouldn't give them up to me. She knew I'd probably abuse them.

SmartKitty, that one.

 

[ToolmanTexas]

What do you like that's small and has a glass tank. This is the only thing on my shopping list.
I wish it was smaller.
$16.71 SXK Kayfun Mini V3 Styled RTA Rebuildable Tank Atomizer - 2ml / 316 stainless steel + glass / 19mm dia. at FastTech - Worldwide Free Shipping

My tinies... Doggystyle SXK, KFL+ and Erl nano, ... Erl is glass (unfortunately harder to get now):

 

[juskiddin]

My tinies... Doggystyle SXK, KFL+ and Erl nano, ... Erl is glass (unfortunately harder to get now):
View attachment 670081

^^^^Like! No...LOVE!

 

[DPLongo22]

My tinies... Doggystyle SXK, KFL+ and Erl nano, ... Erl is glass (unfortunately harder to get now):
View attachment 670081

^^^^Like! No...LOVE!

Yeps. I too love it Doggystyle. GREAT little tanks!

 

[ToolmanTexas]

^^^^Like! No...LOVE!

Ah shucks

And the mods are all COV Volts... 2 mini and 1 mega (a tiny mega, its an oxymoron )

 

[ToolmanTexas]

Yeps. I too love it Doggystyle. GREAT little tanks!

Roll snare.

 

[RainSong]

Yeps. I too love it Doggystyle. GREAT little tanks!

I know! I need more that the one that I have. Darn spending lockdown

 

[ToolmanTexas]

What do you like that's small and has a glass tank. This is the only thing on my shopping list.
I wish it was smaller.
$16.71 SXK Kayfun Mini V3 Styled RTA Rebuildable Tank Atomizer - 2ml / 316 stainless steel + glass / 19mm dia. at FastTech - Worldwide Free Shipping

@lil_buddy, if you like the KFL or are open to trying you could piece the following together for an uber nano tank w glass:

$2.58 Kayfun Quartz Tank Kit - stainless steel + glass at FastTech - Worldwide Free Shipping
$2.26 Replacement Five Pawns Styled Chimney for Kayfun RTA - stainless steel at FastTech - Worldwide Free Shipping
$4.64 Replacement Base for Kayfun Lite Five Pawns - stainless steel at FastTech - Worldwide Free Shipping
$2.51 Replacement Top Cap for Kayfun Lite Five Pawns RTA Atomizer - w/ 510 drip tip / stainless steel at FastTech - Worldwide Free Shipping

Total cost around $11.. be aware that top cap only takes that drip tip, so if that is a no go then:
$2.06 Replacement Top Cap for Kayfun Monster V2 RTA Atomizer - stainless steel at FastTech - Worldwide Free Shipping

Another glass option:
$3.54 Replacement Tank + Chimney Nano Kit for Kayfun / Orchid - quartz glass + stainless steel at FastTech - Worldwide Free Shipping

 

[lil_buddy]

@lil_buddy, if you like the KFL or are open to trying you could piece the following together for an uber nano tank w glass:

$2.62 Kayfun Quartz Nano Tank - stainless steel + PC / black + blue at FastTech - Worldwide Free Shipping
$2.26 Replacement Five Pawns Styled Chimney for Kayfun RTA - stainless steel at FastTech - Worldwide Free Shipping
$3.51 Replacement Base for Kayfun Lite Plus - stainless steel / black plated at FastTech - Worldwide Free Shipping
$2.63 Replacement Top Cap for Kayfun Lite Five Pawns RTA Atomizer - w/ 510 drip tip / stainless steel at FastTech - Worldwide Free Shipping

Total cost around $11.. be aware that top cap only takes that drip tip, so if that is a no go then:
$2.16 Replacement Top Cap for Kayfun Monster V2 RTA Atomizer - stainless steel at FastTech - Worldwide Free Shipping

I don't have any likes because I don't have any RTA's. Feel like I should have a couple in my arsenal, though. I thought the one I chose seemed well made, solid, & has a tight draw. I like that it is 19mm, the height is not great, but not a deal breaker.

Plastic is a deal breaker. I have decided to longer experiment with that.

 

[ToolmanTexas]

I don't have any likes because I don't have any RTA's. Feel like I should have a couple in my arsenal, though. I thought the one I chose seemed well made, solid, & has a tight draw. I like that it is 19mm, the height is not great, but not a deal breaker.

I have a drawer full of the KFMV3. Really nice atty that is easy to build on and use.

 

[RainSong]

I have a drawer full of the KFMV3. Really nice atty that is easy to build on and use.

View attachment 670087

Not for long

 

[DPLongo22]

Not for long

 

[RainSong]

I have a drawer full of the KFMV3. Really nice atty that is easy to build on and use.

View attachment 670087

I like those too but throwing it on the Jac makes it seem too long, like a darn wand or scepter. Very interested in piecing together the glass kayfun you just linked to.