• Need help from former MFS (MyFreedomSmokes) customers

    Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?

    View thread

Tootle Puffers, Part Three! (The Sequel of the Redux)

medleypat

Super Member
ECF Veteran
Verified Member
Apr 5, 2016
641
1,899
63
Frankfort Indiana
Yes, I put juice on the little wicks sticking out and leave it for at least 15 minutes, probably why it's a bad lot
Does the box say occ coils if not I think those are old coils might be the problem.
 

ChelsB

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2016
7,848
39,399
California
My MISTAKE the O rings are 1/2 inch (I just measured to make sure).I had gone to the hardware store with my pt mini in hand and the sales person and I kept trying different rings til one fit.

The 1/2 inch thin ones fit and are working.

I don't know why 3/8 inch kept sticking in my head (I'm getting old).

I use a 50/50 pg,vg juice in my rebuilt pt minis all the time.

No worries, I hadn't gone to the hardware store yet!
 

medleypat

Super Member
ECF Veteran
Verified Member
Apr 5, 2016
641
1,899
63
Frankfort Indiana
50/50 in your ProTank :eek: And you get dry hits/burning taste?

I would never use 50/50 in a ProTank (or it's smaller cousin, the EVOD), I would up the PG in that to at least 70, if not 75. At 75PG25VG, no dry hits.

Of course, that's my opinion ;)
I use 50/50 in mine with factory coils with no problem
 

Burnie

The Bug Man
ECF Veteran
Verified Member
Jul 1, 2009
5,445
17,965
Sunny Florida
The Nautilus X my wife is using, came from the Quad kit, bought it for myself to use the rebuildable setup, but I wasn't that impressed with it, so sat in the dust pile for months, till the wife wanted a new setup, so been dug back out to use as The Naut X for her.

With the 1.8ohm coil being newer, explains why they are even harder to find, but the coil I bought the wife yesterday from the local B&M was the 1.5ohm, and she is liking that and is lasting so far, so just bought her 4 packs of them last night from madvapes, as they seemed to have the best price for a US vendor.
Don't know if the 2ml capacity is a problem for her (was for me), but they make an adapter kit for the X to make it 4ml capacity. Did a quick google, here is what I am talking about. Aspire Nautilus X 4ml Adapter (have not purchased from there, just for reference)
 

DingerCPA

Vaping Mistress
Supporting Member
ECF Veteran
Verified Member
Apr 9, 2014
9,020
59,877
Corn 'n' Cows
I was going with the Buckeyes :blink:

NFL ... Cowboys for the Super Bowl

Yes, I miss that weekly NFL Contest and your awesome input every week :cool:

BLERGH - what happened to the Buckeyes ????? They appeared to be "dressed" for the game, but I don't think it was the same team of players :blink: :shock:
 

Nailz

Vaping Master
ECF Veteran
Verified Member
  • Jun 6, 2013
    6,556
    30,149
    Wichita, KS
    Don't know if the 2ml capacity is a problem for her (was for me), but they make an adapter kit for the X to make it 4ml capacity. Did a quick google, here is what I am talking about. Aspire Nautilus X 4ml Adapter (have not purchased from there, just for reference)

    Thanks @Burnie I did see they did a extension kit for it, right now she hasn't complained about the 2 mil capacity, and likes it being so small (inset joke here), but it is good to see can expand it if needed though :)
     

    ChelsB

    Vaping Master
    ECF Veteran
    Verified Member
    Dec 12, 2016
    7,848
    39,399
    California
    Thanks @Burnie I did see they did a extension kit for it, right now she hasn't complained about the 2 mil capacity, and likes it being so small (inset joke here), but it is good to see can expand it if needed though :)

    I often find myself laughing at how much our lingo could be construed as naughty!
     

    Zen Knitter

    Super Member
    ECF Veteran
    Verified Member
    Sep 27, 2016
    840
    4,290
    Gold country, Calif.
    Shawn thanks. You may have but this thread has been so busy the past couple days it's hard to find anything.

    Hmmmm, you're right.

    Edit: i poked around a little more and found it at the efun.top FB page. It's an old add from last October only good Oct 21-25 :mad:

    That's good to know, I paid $25 from FT. Hated seeing I could have gotten it for $10 less.:p
     

    Sir Kadly

    Tootle Wompin' Squonkaholic
    ECF Veteran
    Verified Member
    Sep 18, 2015
    4,272
    49,479
    52
    Indiana
    Yea, you really need to watch how you word stuff around this bunch, :facepalm: LOTS of Dirty Minds Roaming Around. :D


    :img:
    Thanks for letting me know where to find my mind. I lost it quite some time ago and didn't know where to look.:D
     

    aikanae1

    Vaping Master
    ECF Veteran
    Verified Member
    Feb 2, 2013
    8,423
    26,210
    az
    OK. I'm ready to admit I'm a TP. My favorite tanks are PT2 minis. I take them to work on Spinners because they fit in my pocket. Sometimes when I get in a conversation with folks in the smoking / vaping area I tell them I have better gear at home because I'm a little embarrassed about the minis. But I often use the minis at home as well.

    I do have some Kayfun Lites but they are TP gear as well, just more flashy looking.

    I have a question for any PT mini users here, figured this would be a good place to find them. I just got a couple more minis on sale for $6 and one of the o-rings was torn. Realised I don't have any spare glass seal o-rings. I thought they came with spare o-rings, but when I looked at a bag of rings today they are just drip tip rings. I started looking around and they are hard to find now. One site, Sun Vapers, said that the V2 minis use different o-rings for the top and bottom of the glass. I checked and that's true. The rings at the top of the glass are thinner. But none of the other sellers mention the difference, even the Kangertech site. They just sell bags of o-rings.

    I have a bunch of minis and I was expecting them to last me forever. I have a load of heads which I rebuild, with a big bag of spare insulators. But I need rings. Does anyone know if the V2's work with the same rings top and bottom.

    Appreciate any suggestions.
    I admit I've still got about 15 or 20 pages to read still so this may have already been mentioned;
    60-piece Protank / Evod / MT3 Rebuilder's Kit by clonecores

    Sent from my LGLS992 using Tapatalk
     

    DavidOck

    ECF Guru
    Supporting Member
    ECF Veteran
    Jan 3, 2013
    18,882
    161,376
    Halfway to Paradise, WA
    l89pa.jpg
     

    TrollDragon

    ECF Guru
    ECF Veteran
    Dec 3, 2014
    10,538
    57,333
    NS, Canada
    So dear @DingerCPA, how is the VT133 treating you? I haven't seen any WOW AMAZING posts about it yet so I assume it's just okay and no love yet?

    If I missed those posts then please forgive me. It would be a bad thing if you didn't find any DNA nirvana on my recommendation. :oops:
     

    Plettschner

    Ultra Member
    ECF Veteran
    Verified Member
    May 2, 2013
    1,085
    5,970
    CT
    Last night I changed it out with these
    I realize the mini is not in the photo but that is the one I'm having problems with (in case you were wondering )
    72f8ab78a1c975a158fcb1a27512fa6a.jpg



    Sent from my iPhone using Tapatalk
    Are those the VOCC coils? I just picked some of those up this week. First one took a day to break in and then it was great. Started out at about 10-11W... 2nd day, about 12-13W... 3rd day on, 14.5W. Going on 6 days now, still at 14.5W... HUGE improvement over the dual coils.
     

    Users who are viewing this thread