Tricro coil

Status
Not open for further replies.

Iquitcigs

Senior Member
ECF Veteran
Oct 27, 2013
256
90
Kent uk
hello just posting to show my tricro coil build this on is 2.0 omh made from 28 ga kanthal it vapes very well best i have made so far 5 wrap micro on the bottom and 2 5 wrap nano coils on top man is this good so much vapour and flavour sorry could not work out how to rotate these 2013-12-14 04.08.59.jpg2013-12-14 04.09.11.jpg
 

suspectK

Vaping Master
ECF Veteran
Verified Member
Aug 7, 2013
4,573
2,893
Alabummer
What diameters are your coils? I don't see how the entire circuit is two ohms...unless you mean each coil is 2 ohms, but that doesn't make sense if you have 1micro and 2nanos. If the circuit is two ohms, and the coils were the same resistance, they would be 6ohms each. Picture is blurry for me, so I can't tell what's going on.
 

Iquitcigs

Senior Member
ECF Veteran
Oct 27, 2013
256
90
Kent uk
ok its one coil made from a single piece of 30g kanthal you warp the first one on the bottom a micro coil 1.5 mm inside diameter on to your drill bit then with the lose tails you wrap two nano coils on top using a 1mm -0.75mm pin or something similar this gave me 2 omh but could lower this with less wraps different diameter sorry about the pictures done using my phone i have no other camera.
the idea is the nano coils give you the heat =throat hit and the micro gives flavour this is un wicked in the centre just cotton around it works very well look at the you tube and search for rip tripper he has a video up he warps on at 1.5 ohms
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread