Ugh this is hard lol

[Daddy dan123]

Man it's hard to navigate in here. Maybe just me. Anyways is kidney puncher a good place to get the kfl clone. Is the company reputable. And is the vaping tech site that twisted 420 said to get the crown rda clone a good reputable site. I'm worried about online purchases and I only order from mbv for hardware lol and bwb and vape dudes for ejuice since friends have ordered there and I know it's not a rip off. I been vaping for a while now and tierd of the evods iclear 30 aspires mt3s protank a and minis lol I like my kangers eh but been recently dripping and rebuilding and looking to get other thing beside my igo-l. Which was great at first than I bored my stock hole to 1/16 and is great for lung hits but I like mouth to lung and seem to lost flavor in boring it out. Not much but a little. (Drilled not bored lol) I'm more into flavor now days than I am sub ohms and cloud chasing. It just looks funny at work in the smokers pit. I'm new to posting it's my first all though I do my research here and you tube. Sorry for the long post just wanted to let you know where I'm at. By the way if I'm using a tank I usually rebuild it myself with cotton. I use 30 gauge kanthal and about 1.6-2.0 ohm coils with cotton. Don't care if it's single or dual coil just wanting to get a kfl instead of my igo and wanting a crown like twisted 420. Thx

 

[Cloud Junky]

Man it's hard to navigate in here. Maybe just me. Anyways is kidney puncher a good place to get the kfl clone. Is the company reputable. And is the vaping tech site that twisted 420 said to get the crown rda clone a good reputable site. I'm worried about online purchases and I only order from mbv for hardware lol and bwb and vape dudes for ejuice since friends have ordered there and I know it's not a rip off. I been vaping for a while now and tierd of the evods iclear 30 aspires mt3s protank a and minis lol I like my kangers eh but been recently dripping and rebuilding and looking to get other thing beside my igo-l. Which was great at first than I bored my stock hole to 1/16 and is great for lung hits but I like mouth to lung and seem to lost flavor in boring it out. Not much but a little. (Drilled not bored lol) I'm more into flavor now days than I am sub ohms and cloud chasing. It just looks funny at work in the smokers pit. I'm new to posting it's my first all though I do my research here and you tube. Sorry for the long post just wanted to let you know where I'm at. By the way if I'm using a tank I usually rebuild it myself with cotton. I use 30 gauge kanthal and about 1.6-2.0 ohm coils with cotton. Don't care if it's single or dual coil just wanting to get a kfl instead of my igo and wanting a crown like twisted 420. Thx

Don't stress out... Leave that part for me. Kidney Puncher is very repidable, I have bought $1000's of things from them from mods, wire, O-rings, screws, drip tips (they are really good tips too) etc. Why not go for a R91% you ban get better clouds from that then you would a KFL. Best of luck to you.

 

[ADLinATL]

Yeah those sites are fine to order from. Personally I like the KFL+ better than the Russian 91..better threads and less leaking but maybe it's just mine and I don't vouch for any clones.

 

[Daddy dan123]

Don't stress out... Leave that part for me. Kidney Puncher is very repidable, I have bought $1000's of things from them from mods, wire, O-rings, screws, drip tips (they are really good tips too) etc. Why not go for a R91% you ban get better clouds from that then you would a KFL. Best of luck to you.

Thank you all I needed lol. But as stated not really into the cloud chasing. I like a decent cloud I just don't want to look like I'm smoking .... from a light bulb when I already get looks in my small town like wth is that thing. Ppl tell me stop now it has anti freeze lmao or it's making ppl sick and die. It'll give you pneumonia or bronchitis ugh. Yea don't care for the plumes of vape as I am flavor. I like the look of the Russian but seems to be a little more pricy and I've seen not one bad comment on the kfl. I really appreciate your quick comments but personally I feel the sub ohms and plumes are not for me. I'm more into the flavor. Vape on vape strong

 

[Daddy dan123]

So the kfl and Russian both leak even though it's suposed to be leak proof. Lol guess nothing is really 100 percent efficient when it's man made. Maybe hence the 91% on the Russian? Hmmm food for thought

 

[EnFlaMEd]

do genuine KFL + v2s leak?

 

[Daddy dan123]

Don't know man. I'd assume they do since we always seem to have a problem when there's parts and liquids and heat. It's always gonna be there. But that's the fun part right? The hassle of tinkering and fixing? That's what I say I make me feel better. At one point I figured I didn't like vaping cuz it's no hassle in lighting up a cigarette but also when I assume I make an ... out of u and me lol

 

[Lombaowski]

Worst part of these forums is there are WAY TOO MANY subforums. Way too many.

Everything else is awesome, gllllllllll.

 

[Daddy dan123]

Not so bad after this. I just go to the email and here it is lol. I know this doesn't fit the criteria but does anyone own an innokin I taste svd? I have an authentic one according to the serial number but noticed that on two very rare occasions it's fired up while unlocking it lol. I am for sure I only pressed the up and down button and deff not the fire button. When it happened it lasted a good two three seconds and I was too amazed and shocked to pull my evod off than a month later with my igo. Not one problem as of yet (knock on wood) with my mvp but the svd seems iffy sometimes. Seems if I don't press exactly straight down on the fire button too that it won't fire at all. Seems it has its days

 

[edyle]

Worst part of these forums is there are WAY TOO MANY subforums. Way too many.

Everything else is awesome, gllllllllll.

Just below where it says "Forum"; instead of clicking on "Forum", use the "What's new" menu.

 

[EnFlaMEd]

Don't know man. I'd assume they do since we always seem to have a problem when there's parts and liquids and heat. It's always gonna be there. But that's the fun part right? The hassle of tinkering and fixing? That's what I say I make me feel better. At one point I figured I didn't like vaping cuz it's no hassle in lighting up a cigarette but also when I assume I make an ... out of u and me lol

I was a bit the same at first but then I realised that I dont need to carry a lighter around, worry about where to put my .... out, finishing off or wasting half a smoke when I have to do something etc. Yeah its bit of mucking around to set mine up but then I dont have to touch it for 2-3 days, just turn it on and off.

My odyssey tank doesn't leak at all but I want to get a KFL so I can do my own coils because getting them(atomisers for the oddy) shipped here from US is a major pain in the .... and its also stupidly expensive.

 

[Daddy dan123]

Now we can smoke inside (except where I work it seems it's the only place in the USA that banned ecigs lol) or now in the car with my non smoking non vaping wife. I don't have to worry about the dog or kids. Anyone else notice my dog came before my kids lol my dog is nicer and loves me more the wife only came first cuz unfortunately for her I always come first. Aha. Yes on my igo-l I used my own kanthal and cotton when I first got it since the stuff it comes with is eh. But I say my first ever coil was an is a 1.6 micro and it looks actually kinda perfect. Beginners luck eh. But I've changed the cotton once and I'm just charging my batteries and mvp. It's nice no unscrewing tanks or is the mouth piece leaking a bit when filling or sticking a qtip in it or washing a tank etc. damn tanks are a pain now that I have a dripper lol. Thank you grimm green for suggesting that igo-l. As stated I drilled mine and deff don't like it. It makes my worse kangers loose draws seem super tight now lol

 

[coalyard]

So the kfl and Russian both leak even though it's suposed to be leak proof. Lol guess nothing is really 100 percent efficient when it's man made. Maybe hence the 91% on the Russian? Hmmm food for thought

If ur KFL leaks, ur doing it wrong.

 

[Maestro]

Just below where it says "Forum"; instead of clicking on "Forum", use the "What's new" menu.

Or just click on "New Posts"

 

[^Top-Shelf^]

I've been using the Kayfun light plus clone for 3 months now and it hasn't leaked once, not even when left laying on its side over night. If looking in to kayfuns I would recommend the 2014 Kayfun light plus clone by Tobeco. Has airflow control on the bottom "Set and forget" and adjustable 510 connection "authentic version 2 doesn't even have this feature". It is the same as the so called Black Edition that everyone talks about and spends more on for the fancy box lol. I got mine new off eBay for $36, think the going price now is $40 but you have to know what to look for. Best clone To get IMO

 

[^Top-Shelf^]

Oops double post

 

[AndriaD]

Thank you all I needed lol. But as stated not really into the cloud chasing. I like a decent cloud I just don't want to look like I'm smoking .... from a light bulb when I already get looks in my small town like wth is that thing. Ppl tell me stop now it has anti freeze lmao or it's making ppl sick and die. It'll give you pneumonia or bronchitis ugh. Yea don't care for the plumes of vape as I am flavor. I like the look of the Russian but seems to be a little more pricy and I've seen not one bad comment on the kfl. I really appreciate your quick comments but personally I feel the sub ohms and plumes are not for me. I'm more into the flavor. Vape on vape strong

Don't worry about the idiot things people will say to you; they're just parroting all the stupid things the idiot media is saying, and they're being spoon-fed by their corporate masters who stand to lose a lot of money. You can't fix stupid OR greedy, so just smile and carry on vaping.

Good luck on your search!

Andria

 

[Daddy dan123]

You guys are all more than helpful. I love that I found my new home so to speak. Again thank you and can't wait for my new purchases