Unofficial canvape Fanboy/Fangirl Thread

[martinc]

Even better,polished then powder coated with transluscent green

 

[Mindfield]

Even better,polished then powder coated with transluscent green

Even better, ensconced in a thin sheath of pure polished emerald, and then have that completely covered by a black rubber case so as to prevent the emerald from shattering when you drop it...

 

[erinluvsahmed]

Yeah see I could do that in blue sapphires.. sigh.. that just sounds lovely

Even better, ensconced in a thin sheath of pure polished emerald, and then have that completely covered by a black rubber case so as to prevent the emerald from shattering when you drop it...

 

[MattB]

We should get them covered in that ever changing chameleon paint. You know, the one that goes from green to purple to gold all depending on the angle you stare at it?

How awesome would that be? Maybe drop in some extra fine glitters in the paint canister. Make it all shimmery like?

 

[Mindfield]

We should get them covered in that ever changing chameleon paint. You know, the one that goes from green to purple to gold all depending on the angle you stare at it?

How awesome would that be? Maybe drop in some extra fine glitters in the paint canister. Make it all shimmery like?

Thermo-reactive paint. It would be like a mood ring, only you vape it.

 

[martinc]

Nope,insert+ oil or water like the lighters our uncles had when we were younglings...you know,the ones with women in bikinis and when you fliped it over the bikini kinda....disapear

 

[Mindfield]

Nope,insert+ oil or water like the lighters our uncles had when we were younglings...you know,the ones with women in bikinis and when you fliped it over the bikini kinda....disapear

I like the way you think.

 

[MattB]

I like the way you think.

Seconded! Pure Genius!

 

[Unknownn]

These guys are great!

 

[just Ridge]

 

[ChellyNelly]

You actually draw these youself, Ridge? I had a feeling but now I think it's been confirmed! Pretty funny stuff.

Got my Canvapemail today Been vaping on the Extreme Vision all afternoon and it's a dream, really. A thing of beauty.

 

[MattB]

Speaking of visions, anybody here find that they tend to leak more down the center post with any liquid with a PG ratio of above 50%?

My 50/50 mixes seem to vape OK with minimal leakage, but my 70/30 mixes leak a crapload.

 

[DevilFishPhil]

Why is it that some people just have this ability to pick up a pen/pencil and draw?!? I couldn't for the life of me draw a stick figure man that looks anywhere good as Ridge's.

On to Canvape related topics, I just got a chance to try one of those IMR 18650 batts and I have to say I'm thoroughly impressed - after being abused since 8am this morning they're still putting out 3.6V. For that price just might have to pick up a few more.

 

[martinc]

Speaking of visions, anybody here find that they tend to leak more down the center post with any liquid with a PG ratio of above 50%?

My 50/50 mixes seem to vape OK with minimal leakage, but my 70/30 mixes leak a crapload.

Messed with the silicone cap at all?
Raised it perhaps?
Also leaving it on its side can lead to that,seal is not always perfect

 

[ChellyNelly]

Why is it that some people just have this ability to pick up a pen/pencil and draw?!? I couldn't for the life of me draw a stick figure man that looks anywhere good as Ridge's.

On to Canvape related topics, I just got a chance to try one of those IMR 18650 batts and I have to say I'm thoroughly impressed - after being abused since 8am this morning they're still putting out 3.6V. For that price just might have to pick up a few more.

I just got the Trustfires from them & charger. Also got some RCR123as (Tenergy LiPo4) from the classifieds that showed up today. These are for our Parke's Diamonds. I don't know much about batteries, just bought em cuz they were the best prices LOL. Are they gonna do the trick?

 

[Mindfield]

Speaking of visions, anybody here find that they tend to leak more down the center post with any liquid with a PG ratio of above 50%?

My 50/50 mixes seem to vape OK with minimal leakage, but my 70/30 mixes leak a crapload.

It's a combination of the condensation and the mouthpiece. That mouthpiece is an absolute condensation magnet. There are three chambers in which condensation builds up, and it builds up quite a bit. When it builds up enough to pool, there's only one convenient exit: Through the hole in the mouthpiece that leads down the coil, and when that happens, it's gurgle city.

My Ultimate mod does help alleviate that to a degree by not allowing juice to pool as much. Since the hole is wider and fits around the outside of the cup there's a smaller ledge for it to pool on above the silicone bit. Condensation still goes back into the cup but it's at a slower pace that allows the wick to pick it up better and effectively recycle it to be vaped.

You'll still get it, just not as often or quite as bad. I'm going to try and think of a mod that can be done to it to fix that once and for all. I don't think it can be done without extra materials though.

 

[DevilFishPhil]

They will most certainly do the trick, that Parke's mod will pretty much take any 18650 battery. You're gonna love 'em!

I just got the Trustfires from them & charger. Also got some RCR123as (Tenergy LiPo4) from the classifieds that showed up today. These are for our Parke's Diamonds. I don't know much about batteries, just bought em cuz they were the best prices LOL. Are they gonna do the trick?

 

[MattB]

Messed with the silicone cap at all?
Raised it perhaps?
Also leaving it on its side can lead to that,seal is not always perfect

Nope, didnt screw around with it at all. Havent the patience to try the mod.

I usually keep the LT upright too. Seems to happen when i drag on it too much at one set time.

 

[MattB]

It's a combination of the condensation and the mouthpiece. That mouthpiece is an absolute condensation magnet. There are three chambers in which condensation builds up, and it builds up quite a bit. When it builds up enough to pool, there's only one convenient exit: Through the hole in the mouthpiece that leads down the coil, and when that happens, it's gurgle city.

My Ultimate mod does help alleviate that to a degree by not allowing juice to pool as much. Since the hole is wider and fits around the outside of the cup there's a smaller ledge for it to pool on above the silicone bit. Condensation still goes back into the cup but it's at a slower pace that allows the wick to pick it up better and effectively recycle it to be vaped.

You'll still get it, just not as often or quite as bad. I'm going to try and think of a mod that can be done to it to fix that once and for all. I don't think it can be done without extra materials though.

Dammit, i guess i'll have to try the mod now. Good thing Adam sent me more tips as a bonus. I figure my fat fingers will likely screw one or two up before i get the hang of it.

 

[erinluvsahmed]

OK so guys I need some help with the 901 atomizer on my kr808d. How many drops would you guys recommend and how long do these drops last? lol I got so spoiled with cartomizers and really want to try dripping. Tom told me to prime it first which I did I dropped 4 drops in and I got a couple of good pulls and clouds of vape but than I got this really odd taste which I was forewarned that this is like vaping glass taste and means I need to drip more. So how often do I drip lol it seemed like just a couple of pulls and bam that taste was there. Help me out guys cuz I feel like I'm doing something wrong.