Using an HH .357 or Cisco Spec Atomizer with a KGO

[ILoveAngryB1rds]

I have a Hoosier ecig KGO kit by SLB (1100MAH, 3.8 or so volt) and am considering purchasing an HH .357 atomizer or a LR510 cisco spec atomizer. However, avidvapor.com says "These 1.5ohm hybrid atomizers are designed for single cell 3.7 Li-ion battery mods or VV mods with outputs under 4v. DO NOT use on 5v or 6v mods or eGo/Riva batteries." and for their LR cisco spec atomizers: "Use on eGo | Riva style batteries at your own risk"

Not sure if its a good idea because im not sure if the KGO uses a single cell Li-ion battery or not. Confused too because im looking for the hottest, most power vape. Ive heard 1.5ohm is a hotter vape than 2ohm, but the hoosier ecig site says 3.8v with 1.5ohm and 4v with 2ohm.

 

[Mroutlaw]

You can use it, but you will deplete your battery life quicker. The kgo operates at 3.7 most of the time. Since it is only one voltage, the lower the resistance, the warmer the vape, the more vapor you will get. But the lower the resistance, the shorter the battery life. The more watts you use, the warmer the vape. Use this formula to figure watts

Voltage x Voltage / resistance = watts. So. 3.7x3.7 / 1.5= 9.12watts


That is very high for most people. If you are vaping fruit or sweet flavors, they may not taste right. Usually coffee, chocolate and tobacco taste better with higher watts


Sent from my iPad using Tapatalk HD

 

[ILoveAngryB1rds]

Thank you!!!