Vapefly Brunhilde MTL RTA any Legit place to buy one?
- Thread starter Alphantor
- Start date
- th_trl_thread_readers 0
Awesome! I found it at 3FVape someone mentioned they were legit.Awesome RTA Mate
Try AliExpress
Thank you!
Do you think I will get good flavor with this RTA?
I personally think the Brunhilde MTL RTA will give you magnificent flavour
I've got a few myself and think they're fabulous!!
I personally think the Brunhilde MTL RTA will give you magnificent flavour
I've got a few myself and think they're fabulous!!
View attachment 997280
That's really amazing! I am going to order one this week or next week. Thank you
I personally think the Brunhilde MTL RTA will give you magnificent flavour
I've got a few myself and think they're fabulous!!
View attachment 997280
These kits looks awesome!
This well known, reputable website in China also sells them, and currently has them in 4 colors [SS, Dark Blue, Black, and gunmetal], even though the info below says they only have them in 3 colors. They're on sale for only $16.39 + S/H.
Vapefly Brunhilde MTL RTA 23mm 5ml Rebuildable Tank Atomizer
Brunhilde Top Coiler MTL RTA, designed by Vapefly & German 103, 23mm diameter, 5ml capacity, single coil building, bottom airflow system, premium stainless steel wires from Germany. Available in 3 colors: Black, SS, Gunmetal.
Last edited:
Thanks Mate
Most of these mods are custom from JDMods and there's a few Vicious Ant mods in there too!! All with fantastic attys on top!
That's an Absolute fantastic price Sourcemoure have! I purchase quite a few of mine from there for what I thought was a very good price, about $22us!This well known, reputable website in China also sells them, and currently has them in 4 colors [SS, Dark Blue, Black, and gunmetal], even though the info below says they only have them in 3 colors. They're on sale for only $16.39 + S/H.
Vapefly Brunhilde MTL RTA 23mm 5ml Rebuildable Tank Atomizer
Brunhilde Top Coiler MTL RTA, designed by Vapefly & German 103, 23mm diameter, 5ml capacity, single coil building, bottom airflow system, premium stainless steel wires from Germany. Available in 3 colors: Black, SS, Gunmetal.www.sourcemore.com
@Alphantor you should definitely grab one or 12 of these
Just wondering wanted to confirm a few things about the Vapefly German 103 Brunhilde MTL.
1) Can I use 6mg nicotine with this tank?
2) Could I use the 0.28ohm Wotofo Coils that I currently have? If not what are the coils ohm recommendations for this build?
Main reason for switching is the UB PRO RBA is chugging juice like crazy with the 0.28 wotofo coils I legit went through 4 100ml bottles in little over 3 weeks! #2 the UB PRO tank is leaking Ejuice out the air/vent hole on the side, as soon as I pour it it in leaks out. No idea why.
Not looking for crazy vapor/hit production but just not hoping to be less than what I currently have. Just mostly looking for a decent hit that has good flavor.
Appreciate any help.
Also what are these metal things his putting in at 0:16 where the timestamp starts?
1) Can I use 6mg nicotine with this tank?
2) Could I use the 0.28ohm Wotofo Coils that I currently have? If not what are the coils ohm recommendations for this build?
Main reason for switching is the UB PRO RBA is chugging juice like crazy with the 0.28 wotofo coils I legit went through 4 100ml bottles in little over 3 weeks! #2 the UB PRO tank is leaking Ejuice out the air/vent hole on the side, as soon as I pour it it in leaks out. No idea why.
Not looking for crazy vapor/hit production but just not hoping to be less than what I currently have. Just mostly looking for a decent hit that has good flavor.
Appreciate any help.
Also what are these metal things his putting in at 0:16 where the timestamp starts?
I'd like to fill you in on a few things about the Brunhilde MTL RTA
1) Yes you can use 6mg nic in this tank without an issue!
2) Absolutely you are able to use your 0.28 ohm coils! Brunhilde will work just as good with a very wide range of ohms.
And those little metal things are two Stainless Steel rods that run all the way to the bottom of the tank and transfer the juice from the tank up to the wicking via capillary action. A very clever process and it wicks brilliantly!!
Definitely watch a YouTube vid or two on how to build. Not that It's a hard tank in the slightest way to get build but it will help.
Here's a few tips on wicking that may come in handy Help me wick my brunhilde MTL
Just let me know if you have any further questions!
That's perfect! Tysm. Now for the 2 stainless steel rods should they come included with the RTA?I'd like to fill you in on a few things about the Brunhilde MTL RTA
1) Yes you can use 6mg nic in this tank without an issue!
2) Absolutely you are able to use your 0.28 ohm coils! Brunhilde will work just as good with a very wide range of ohms.
And those little metal things are two Stainless Steel rods that run all the way to the bottom of the tank and transfer the juice from the tank up to the wicking via capillary action. A very clever process and it wicks brilliantly!!
Definitely watch a YouTube vid or two on how to build. Not that It's a hard tank in the slightest way to get build but it will help.
Here's a few tips on wicking that may come in handy Help me wick my brunhilde MTL
Just let me know if you have any further questions!
2) If I wanted to buy replacement what are they called?
3) how often should you change those?
The 2 stainless steel rods come pre-installed.
I've had my Brunhilde for a couple years and the SS rods are still working fine. When I clean my RTA I also pull the rods and clean them with vodka. rinse with water, let them dry and they are good to go. I've never had to replace mine.
If you want spare rods:
Vapefly Brunhilde MTL RTA German SS Wire 4pcs for Vapefly Brunhilde Top Coiler MTL RTA
Brunhilde MTL RTA German SS Wire from Vapefly is specially designed for Vapefly Brunhilde MTL RTA. Made of Premium Stainless Steel from Germany, continuous automatic transfer system. 4pcs each pack.
I bought those and a couple spare glass tube sections when I purchased my Brunhilde MTL RTA via Sourcemore.
Spare glass:
Vapefly Brunhilde MTL RTA Glass Tube 5ml Fit for Vapefly Brunhilde MTL RTA
Vapefly Brunhilde MTL RTA Replacement Glass Tube, 5ml capacity, Fit for Vapefly Brunhilde MTL RTA.
Like @Daniel Forsyth suggested, watch a couple YouTube videos and also see his link for building/wicking tips. I found the Brunhilde to be very easy to build on and wick. It is an excellent RTA. I've had zero issues/problems with mine.
As SMT mentioned 2 SS rods will already come installed in Brunhilde and there is another two ss rods in the spare bag just incase!
I've had my heard of Brunhilde's for well over 3 years now and only needed to replace three of the SS rods and that's only because I dropped a few down the sink
so don't wash her over an open sink and they will last forever!!Wanted to update.
I am new to vaping. I haven't vaped since 2016-17 when I had my first Device the Sub Vod (great little device) so I was not aware that MTL is Mouth To Lung. I do not like those at all. I much prefer DTL/DL so I bought the Wotofo Gear V2 24mm RTA I think I am going to like it!
Thank you for the help everyone!
I am new to vaping. I haven't vaped since 2016-17 when I had my first Device the Sub Vod (great little device) so I was not aware that MTL is Mouth To Lung. I do not like those at all. I much prefer DTL/DL so I bought the Wotofo Gear V2 24mm RTA I think I am going to like it!
Thank you for the help everyone!
The Gear is supposed to be a very nice RTA!
Just keep in mind though that I have always vaped on my Brunhilde MTL RTA's DTL. I really don't like a tight MTL draw myself. I don't put any inserts in and open the airflow all the way up and it gives me the perfect direct to lung draw
If you want DL then there's another type of Brunhilde available for that too!!
Thank you so much. I'll keep this in mind as an alternative in case I am not happy with the Gear. Unfortunately my UB Pro tank started leaking badly (unusable) after I stood up to fast with it in my pocket and bumped the metal arm wrest on the swing so I had to buy something new asap.The Gear is supposed to be a very nice RTA!
Just keep in mind though that I have always vaped on my Brunhilde MTL RTA's DTL. I really don't like a tight MTL draw myself. I don't put any inserts in and open the airflow all the way up and it gives me the perfect direct to lung draw
If you want DL then there's another type of Brunhilde available for that too!!
Been watching reviews on the Gear v2 so from a rookie standpoint I think I am going to be happy with it.
EDIT: Just realized I had already made the update about the Gear v2 above hahah my bad
Last edited:
Similar threads
- Locked
- Locked
