Vaping Mail Show 'N' Tell: What did the Postman bring you today?
- Thread starter tygertyger
- Start date
- th_trl_thread_readers 0
- Status
I prefer CHIDbut you are you liking it??
I'm not liking it yet because I've never built a coil before. My first one is throwing errors like crazy rite now. It's coming in at 1.1 ohms. Any tips or suggestions cmac? I'm using 32g with 325 mesh
make sure you have oxidized the mesh well, I usually do it before I roll and after, burn it with some eliquid 4-6 times then it is ready (probably overkill but it is fun ) pass your wire through a flame 2 or 3 times, this will help get rid of any taste on the wire and makes it easier to work with. Don't wrap the coil too tight, try not to have the top nut on tight, just tight enough that it is not loose....think of the coil as water flowing down a spiral tube, if you are getting hotspots just use a tack or something small to bump the wire just below the glowing part....all the way until it is all burning bright. If you are getting alot of errors, chances are it is shorting on the wick somewhere....little hairs sticking out somewhere? You can also try the drill bit method for wrapping the coil, then once you get the coil set up, drop your wick in....you probably know all of this, but if there is anything else let me know......I almost through mine out the window the first day I had it, I was very mad hahah, but it will come and when it does it will be worth it.
) pass your wire through a flame 2 or 3 times, this will help get rid of any taste on the wire and makes it easier to work with. Don't wrap the coil too tight, try not to have the top nut on tight, just tight enough that it is not loose....think of the coil as water flowing down a spiral tube, if you are getting hotspots just use a tack or something small to bump the wire just below the glowing part....all the way until it is all burning bright. If you are getting alot of errors, chances are it is shorting on the wick somewhere....little hairs sticking out somewhere? You can also try the drill bit method for wrapping the coil, then once you get the coil set up, drop your wick in....you probably know all of this, but if there is anything else let me know......I almost through mine out the window the first day I had it, I was very mad hahah, but it will come and when it does it will be worth it.
The most incredible vape mail of all time
For the Zenesis Standard
Replacement Positive post screws X 2
Replacement Negative tank screws X 2
Replacement O-Ring set - Black X 1
Precision Switch Spring X 2
Stainless Steel Replacement 5 ml tank X 1
Note Magnet set was removed from "Sparky" and replaced with one spring. Huge positive difference
For the Zenesis Standard
Replacement Positive post screws X 2
Replacement Negative tank screws X 2
Replacement O-Ring set - Black X 1
Precision Switch Spring X 2
Stainless Steel Replacement 5 ml tank X 1
Note Magnet set was removed from "Sparky" and replaced with one spring. Huge positive difference
make sure you have oxidized the mesh well, I usually do it before I roll and after, burn it with some eliquid 4-6 times then it is ready (probably overkill but it is fun
I'm not quiet ready to throw it out but I'm going to make another wick and coil tomorrow since I'm not working because we got a foot of snow today. Do you find it to be a tight draw? From the research I've done I thought they were airy? Ill get it worked out I'm sure/I hope.
That seems incredibly boring.
But I'm sure only people with a Zenesis product could comprehend the awesomeness.That makes me picture a soldier with a disassembled rifle. You just need a drill sergeant with a stop watch.
Yes it is a little tight, make sure the hole is lined up with the wick, I took a small round file and filed it out a little bit, makes a big differenct, you can use a drill to do it as well but I went with the file so i could increase the hole little by little until it was where I liked it.
Sweet thanks dude. I watched that video on twitter you posted. Ill get a good one built tomorrow and ill buy a little file to bore that hole out a little more.
That seems incredibly boring.
Thanks Jabs for understanding the "feeling", although I must admit to a nano fart of boredom until I replaced the magnets with the spring.
You bring back memories of a younger day when I could do just about anything
Me second from the right
Here is the result of the last couple of months of vape mail
Not the whole collection just the rebuildable part of the collection.
Not the whole collection just the rebuildable part of the collection.
no far dude......you still had more hair that i ever willWas that Militia or Sea?
Reserve University Officer Training Program
Don't know if anything is arriving today, but I did get a few items the last couple of weeks Some Boge XXL carto that I ordered, replacement tips for the Kanger T2, a Mini Nova to review, a couple of Innokin iTaste MVPs to review along with a pair of U-Can juice containers/dispensers, and a small sample of Mad Murdoch's Radiator Pluid sent to me by TheRealCMac that I'm excited to try out since I've been hearing about it all damn year.
A salute to you (no pun intended) for being braver then me to go through that
but i still say you had more hair then i ever could have phoey!
Thanks Mr C. Love the new avatar. I still have all the hair. Its a different colour though.
- Status
