vaporesso one plus cascade doesnt work with 0.3 ohm coils

[Punk In Drublic]

just as the title states, my one plus cascade wont fire with the 0.3 ohm ccell coils. the fire button just flashes green. is there anything i can do to fix it?

3 flashes indicates no Atomizer. This means the device cannot detect the coil. The coil is either bad, or not making contact with the positive pin.

Are you positive you are using a Cascade tank? The Cascade Baby SE that comes with the Cascade One Plus requires the coils to be screwed in, not pressed in. Perhaps take a picture instead of everyone trying to guess.

 

[theunforgiven1]

Ok I will take pictures give me a little bit

 

[theunforgiven1]

 

[theunforgiven1]

That is the .3 ohm coil that doesn't work. They do not screw into the cap, they are a hard too small to thread, the .18ohm coil is the same exact size and the mod makes the connection and fires

 

[Punk In Drublic]

That is the Cascade Baby SE tank. The coils do not thread into the cap, but threads into the base of the tank where it has to make contact with the positive pin. The video @vaper1960 posted displays this.

 

[Mordacai]

There's a video here on the Baby SE version that shows how to remove and replace coils.
Vaporesso Cascade Baby SE Tank

 

[theunforgiven1]

That is the Cascade Baby SE tank. The coils do not thread into the cap, but threads into the base of the tank where it has to make contact with the positive pin. The video @vaper1960 posted displays this.

View attachment 878083

This is mind blowing, my good coil works with out being threaded in and the other coil doesn't work. Maybe the vape shop was right, the resistance is too high (I doubt that) but I don't know what else to believe. I'm not going to spend my money buying coils anymore, I'm going to get the luxe s with falcon king tank when I can. Thanks for all the help thus far

 

[Mordacai]

Dovpo Topside Squonker (mod type that has a liquid feed bottle that you either squeeze or pump to force liquid through internal tubing/pipework and up through the 510 connector) and an RDA (Rebuildable Dripping Atomiser) may be another option depending upon how vaping may be affected by looming regulations.

As wire and wicking materials are easily available.

It's just an idea only though.

 

[theunforgiven1]

Dovpo Topside Squonker (mod type that has a liquid feed bottle that you either squeeze or pump to force liquid through internal tubing/pipework and up through the 510 connector) and an RDA (Rebuildable Dripping Atomiser) may be another option depending upon how vaping may be affected by looming regulations.

As wire and wicking materials are easily available.

It's just an idea only though.

the whole regulations that might happen are beyond stupid. im keeping my fingers crossed trump doesnt do anything stupid.

 

[Mordacai]

It's Trump you're talking about, of course he always does something stupid. What is a different question.

But would something like I mentioned be of interest to you?

 

[theunforgiven1]

It's Trump you're talking about, of course he always does something stupid. What is a different question.

But would something like I mentioned be of interest to you?

im not going to get into a political debate. what you recommended would be brand new to me as i know absolutely nothing about it. i need to do my research

 

[Mordacai]

Seconded.

By all means take your time to learn about things, I just posed the idea as RDA's are easy to work with. Just put coil in, wick and douse with liquid to prime.

Then it's just squeeze or pump before every inhale or every couple.

 

[vaper1960]

No offense, but I'm done... at least I tried to help (your pics show coils with threads...) Am I missing something?

 

[Vaporesso_Milo]

The other coil does just fine and it's not screwed in

Sorry for late reply and sorry for your trouble. You will need to screw the coil to the base of the tank, not too loose or too tight. Otherwise, it will be no/short atomizer and the light will flash.

 

[theunforgiven1]

Sorry for late reply and sorry for your trouble. You will need to screw the coil to the base of the tank, not too loose or too tight. Otherwise, it will be no/short atomizer and the light will flash.

i will try again today to screw the coil in but at this point im very doubtful

 

[Punk In Drublic]

i will try again today to screw the coil in but at this point im very doubtful

For this tank all coils screw into the base. I am puzzled at how one coil was able to work without this processes and do so without leaking. Should the coil not screw in, then perhaps the threads have been damaged. And screwing the tank together without properly screwing in the coil could very well have caused this damage. Do not force it, for doing so could damage the threads of the base which could lead to tank itself being unusable. Or perhaps the treads of the tank are damaged which is why you can't screw in the coil.

If you look at the base, you will see a gold or copper coloured pin at the bottom. The coil MUST make contact with this pin in order to complete the circuit, otherwise it will not work.

 

[theunforgiven1]

After fighting with it all day I finally got it working with the .3 ohm coil

 

[Astroviewer]

Just try another coil,man.Some coils are defective, the inner coil(wire) may just be broken. If you have dropped it or something... Not that big of a deal. Tell the dude in the vape shop who told you that it is the resistance problem to find another job.