Vaporesso XTRA Pod Kit 900mAh

[Frenkyou]

A few weeks ago I started to test this new Vaporesso product (XTRA Pod Kit 900mAh) with a "Drop in Box" design, which in my opinion was very successful.

I thank Vaporesso for sending this product for the review: Xtra » Vaporesso

Packaging:

the XTRA cardboard box contains the brand name, product image, specifications, content, logos, brands, scratch and check, bar code, batch number.

On the other sides of the package the main features are mentioned, the advertising motto Get More with less and all the manufacturer's addresses.

First opening of the package:

Package contents:

1 x VAPORESSO XTRA battery
1 x Mesh Pod for Flavor (2ml, 0.8Ω, pre-installed)
1 x MTL Pod (2ml, 1.2Ω)
1 x USB cable
1 x User Manual
1 x Warranty card
1 x Memory Card

Parameters:

Dimensions: 73.9x38.2x16.7 mm
-POD capacity: 2 ml
-Battery capacity: 900 mAh
-Coil UNIPOD 1,2ohm
-Coil UNIPOD MESHED 0,8ohm
-Output power: 11W UNIPOD
-Output power: 16W MESHED UNIPOD
-Display: 3-color single LED
-Charge current: DC 5V / 1A

Available colours:

The Vaporesso Xtra offers an innovative look in the world of pod devices, the metal part has a shape with rounded asymmetrical edges that goes well with the decorative fabric texture.

As you slide your fingers over the smooth metal finish to the silk-like fabric panels, you get a nice feeling.

The rounded edge is designed to contour the internal curve of the fingers anatomically.

In the lower part we can see the LED and the micro USB charging socket

In the upper part the XTRA is equipped with a sturdy attachment point for the cords so you can wear it around your neck.

 

[Frenkyou]

The bottom of the mod houses the on / off button and the vents for the 900mAh battery.

The accommodation for the Pod is obtained directly in the main body of the XTRA, two magnets perform this task.

Both pods available have a lateral silicone rubber for the refill (red) for the UNIPOD MESHED 0,8ohm and (gray) for the UNIPOD 1,2ohm.

Once the refill is done and the pod is inserted, we can start vaping, to check the liquid level from time to time just flip the mod and observe through the transparent cap.

Depending on the coil inserted, the XTRA chip automatically recognizes it to supply the adequate power:
- 16W for the 0.8ohm UNIPOD MESHED
- 11W for the 1.2ohm UNIPOD.

How does it work:

To switch on / off, click 5 times on the button on the bottom of the Mod.

During the vape the color of the led indicates the battery charge level:
-Green 70-100%
-Blue 30-70%
-Red 0-30%

When the XTRA is connected to the charging socket, the LED flashes red 3 times.
During charging, the LED flashes slowly red.
Once charging is complete, the LED remains on and is green.
When the USB cable is removed, the LED flashes green 3 times.


Protections:
-Short circuit protection: the LED flashes red 5 times.
-No load protection: the LED flashes red 5 times.
- Low charge protection: the LED flashes red 3 times.
- Continuous shooting protection longer than 8 seconds: the LED flashes red 3 times.

Final conclusions
If you are looking for a robust pod, with excellent finishes, with a really simple operation thanks to the automatic pull and with satisfying features in MTL, this XTRA is for you.

In this category of automatic Pods, surely the Vaporesso XTRA is among the best I have tried so far, especially in MTL optics.

Regardless of the coil inserted and the type of liquid (fruity-creamy-liqueur) I find that the aromatic restitution is always faithful and in line with what we expect.

The MTL shot with the 1.2 coil and the 11W supplied, make the shot soft and aromatic (sucking slowly) while increasing the suction force the shot becomes more contrasted and satisfying with a clearly noticeable "limit switch", the steam is lukewarm and maintains this temperature constantly.

With the coil from 0.8 to mesh and with its delivery at 16W the quantity of steam emitted increases satisfactorily, as well as slightly increases the temperature, the aromatic yield maintains the (high) levels of 1.2, the shot is fluid and plush I would always define MTL but logically more open, however even in this configuration, by increasing the pulling force, you can feel the curve closing towards an always very satisfying end of stroke.

Another strong point of the XTRA and its UNIPOD is the total absence of condensation, the cartridge compartment always remains dry and clean.

Vaporesso Mini / Pod Family:

I thank Vaporesso for sending me this product in exchange for my opinions: Xtra » Vaporesso

Thanks again for reading, let me know if you have any questions.

 

[Vaporesso_Milo]

Thank you so much for the review and also feedback!

 

[SLM]

Thanks for the review! Very nice pod system!

 

[Frenkyou]

Xtra is an interesting device, it surprised me.

 

[Asha]

Hi.. do the 0.8 coil suitable for 30mg salt nic?
I've tried osmall and I've find it's too tight, I like the loose airflow more.

 

[Frenkyou]

Hi.. do the 0.8 coil suitable for 30mg salt nic?
I've tried osmall and I've find it's too tight, I like the loose airflow more.

Hi ... in Italy we use nicotine with VG / PG 50/50 or 70/30 base
The 0.8 coil requires a lower NIC concentration than the 1.2 coil.

 

[Frenkyou]

Hi ... in Italy we use nicotine with VG / PG 50/50 or 70/30 base
The 0.8 coil requires a lower NIC concentration than the 1.2 coil.

 

[hittman]

I did like the Xtra well enough. It does what it's designed to do. I'd like to see a 1.0 ohm pod for it.