Vaptio S150 ATC Kit Contest: looking for TC device testers—Part 2 Officially started

[Kodak]

3. If you are an experienced TC vaper, let us know what TC devices you have; If not, let us know which TC device is in your vape wish list

I haven't actually taken off with trying TC yet, but I have a lot of TC devices in my arsenal for when I get the hang of building my own coils:

Cloupor Mini + (2 of em)
Vaperesso Target
Evic Mini (2 of em)
Kbox Mini 75w (3 of em)
Ijoy Solo (I think it's TC, but since I just got it I'm not sure)

There's probably a few I forgot too that would do TC.

 

[Kodak]

4. To use a TC device, what kind of vape stuff you need, like the material of the wire, the rebuid tools, ohm reader, etc

I know when I get around to starting with TC that I'll be using SS wire as I've heard it's the best to do temp control with as far as giving the best flavor. I already have a coil master kit and an ohm reader. I'm currently studying up on what kind of wicking material works best with TC though.

 

[Kaezziel]

1. Tag/recommend 1 forum member you know who uses TC device or has quite a few TC knowledge

@2legsshrt is, hands down, the most knowledgeable person I know on TC devices. Every time I read one of his TC related posts, I learn something new.

 

[Kodak]

5. Do you know TCR (temperature coefficient of resistance) before? If you do, share the sheets of TCR you knew; If not, simply reply with “Not yet”

Not yet. As I said, I'm still in the studying stages

 

[Kaezziel]

2. Tag/recommend 1 forum member you know who has some good coil rebuilding skills

@TrollDragon has some pretty solid coil building skills. He also has quite a variety of different wires for different styles of vaping and had experience with multiple RBAs.

 

[Kaezziel]

3. If you are an experienced TC vaper, let us know what TC devices you have; If not, let us know which TC device is in your vape wish list

I have:
1) HeatVape Invader Mini. (50W max, single battery, TC mod.)
2) Vaporesso Target 75VTC (75W max, single battery, TC mod.)
3) Custom SX T-Mod squonker (Uses SX350J board, 75W max, single battery, TC mod.)

 

[orest]

. Tag/recommend 1 forum member you know who uses TC device or has quite a few TC knowledge

@Bo8ka well- versed in the construction of the vehicle and coils

 

[orest]

2. Tag/recommend 1 forum member you know who has some good coil rebuilding skills

@DmitryS very familiar with the material for coils and often makes them very amazing and complex

 

[Kaezziel]

4. To use a TC device, what kind of vape stuff you need, like the material of the wire, the rebuid tools, ohm reader, etc

I don't really need anything beyond what I already own. I have Ni200 wire (multiple gauges), Titanium Grade 1 wire (multiple gauges), pliers, cutters, tweezers, ohm reader, and I wrap on jewelers screwdrivers. I would still like to try TC on stainless, but I do not have any stainless wire at this time.

 

[Ding]

#4
4. To use a TC device, what kind of vape stuff you need, like the material of the wire, the rebuid tools, ohm reader, etc

TC capable device
316L SS,don't care for anything else for TC
ohm reader
coil mandrels/coil master/drill rod of different sizes/cordless drill for claptons and beyond
organic cotton,haven't used rayon yet,TC ceramic coils
besides the normal pliers,clippers/cutters etc

 

[orest]

3. If you are an experienced TC vaper, let us know what TC devices you have; If not, let us know which TC device is in your vape wish list

Wismec RX200 , Evic vtc mini, Target

 

[Kaezziel]

5. Do you know TCR (temperature coefficient of resistance) before? If you do, share the sheets of TCR you knew; If not, simply reply with “Not yet”

I am very familiar with TCR, but I haven't played with any sheets for vaping purposes. I mainly deal with TCR in other applications for work purposes. I deal with high temperature/high pressure vessels and maintain all of the support and control equipment.

 

[orest]

4. To use a TC device, what kind of vape stuff you need, like the material of the wire, the rebuid tools, ohm reader, etc

I prefer vehicle to a stainless steel wire . For winding using conventional screwdriver. For more complex Clapton coils use besides screwdriver

 

[orest]

Do you know TCR (temperature coefficient of resistance) before? If you do, share the sheets of TCR you knew; If not, simply reply with “Not yet”

Not yet

 

[Ding]

#5
5. Do you know TCR (temperature coefficient of resistance) before? If you do, share the sheets of TCR you knew; If not, simply reply with “Not yet”
no sheets.just calculate by type/size of coil..just SS , don't use anything else.basically around 440F, the TCR is 0.0009148.had two toes leftover.

 

[mac63]

entry #3

If you are an experienced TC vaper, let us know what TC devices you have; If not, let us know which TC device is in your vape wish list

One device I have is the istick 40 (bought from Heaven Gifts)
So far have only used a Subtank mini with the pre-built Ni200 coils on it.

 

[Bo8ka]

1. Tag/recommend 1 forum member you know who uses TC device or has quite a few TC knowledge

@Bo8ka well- versed in the construction of the vehicle and coils

I am not bad understand in the TC. I would like to also note @Boris bmp . He also has extensive experience.

 

[mac63]

entry #4

To use a TC device, what kind of vape stuff you need, like the material of the wire, the rebuid tools, ohm reader, etc

got pre-built coils for the tanks
for drippers I have the normal tools and Ni200 wire - also have some Ti wire but haven't tried it yet

 

[Bo8ka]

2. Tag/recommend 1 forum member you know who has some good coil rebuilding skills

@DmitryS makes interesting and beautiful coils

 

[Bo8ka]

3. If you are an experienced TC vaper, let us know what TC devices you have; If not, let us know which TC device is in your vape wish list

I want to buy a mod with DNA200.