RDA Velocity on a 40watt

[kayuuelbee]

Hey guys looking to get a velocity rda and was wondering if it would be worth it seeing as i only have a CoolFIre IV 40watt device at the moment?

 

[Jimi D.]

It should produce decent clouds with a .3 ohm build.

 

[Joshatdot]

I use my Velocity on my eVic VT, 0.50 ohm, 26ga NiCr80, anywhere from 30w to 38w .. sometimes lower.

 

[kayuuelbee]

I use my Velocity on my eVic VT, 0.50 ohm, 26ga NiCr80, anywhere from 30w to 38w .. sometimes lower.

dont have a TC mod atm, which is kinda needed for NiCr if im not mistaken, will li=ook into it though!

 

[Tmebs]

dual 26 at .56 at 31.5 watts....nice for me..

 

[Joshatdot]

dont have a TC mod atm, which is kinda needed for NiCr if im not mistaken, will li=ook into it though!

sorry, NiCr80 = Nichrome-80, Ni200 is for TC

 

[kayuuelbee]

sorry, NiCr80 = Nichrome-80, Ni200 is for TC

ah awesome! sorry very new to vaping feel like im jumping in the deep end haha

 

[kayuuelbee]

dual 26 at .56 at 31.5 watts....nice for me..

how many wraps? and cheers, just ordered ^^

 

[Tmebs]

Oh, sorry. 26 gage kanthal / 2.5 ID at 8 wraps

 

[kayuuelbee]

Oh, sorry. 26 gage kanthal / 2.5 ID at 8 wraps

Whats ID? inner diameter? sorry for the question spam

 

[Tmebs]

Yes, i was gifted a Kuro coiler...its the only size I have. They come in kits of multiple sizes. I only have the 2.5 size.
Look on steam-engine.org and play around with the site, look at and play with the coil tab.
Lets you put in what you have/want, options for single, duel, ect. And then gives you the option for ID (inside diameter) and option for desired ohm. Tells you exactly how many wraps for that desired coil. Also gives an additional option for what the temp. will be for that coil at different wattage setting from cool to hot.

 

[kayuuelbee]

Yes, i was gifted a Kuro coiler...its the only size I have. They come in kits of multiple sizes. I only have the 2.5 size.
Look on steam-engine.org and play around with the site, look at and play with the coil tab.
Lets you put in what you have/want, options for single, duel, ect. And then gives you the option for ID (inside diameter) and option for desired ohm. Tells you exactly how many wraps for that desired coil. Also gives an additional option for what the temp. will be for that coil at different wattage setting from cool to hot.

wow that side is freaking awesome, thank you so much!

 

[Tmebs]

No problem. You can play with the Velocity quite a bit. Just because it isn't made for single coil doesn't mean you can't build it in single coil. You can open or close the air flow options from damn near shut if you want and build higher ohm and vape at lower watts and make that battery last longer.
Good luck and have fun building and learning... Build safe

 

[kayuuelbee]

No problem. You can play with the Velocity quite a bit. Just because it isn't made for single coil doesn't mean you can't build it in single coil. You can open or close the air flow options from damn near shut if you want and build higher ohm and vape at lower watts and make that battery last longer.
Good luck and have fun building and learning... Build safe

Yeah i will do, first dripper so let the experimentation BEGIN, also thankfully battery life isn't an issue as of yet haha, thanks again for your help ^^

 

[Andrew Rogers]

It all comes down to your build. Just play around with it and you'll figure out what you like.

 

[c3scott]

I have one. I like my magma clone more.

 

[c3scott]

Im going Sapor next